Direct atomic scale analysis of the distribution of Cu valence states in Cu/γ-Al2O3 catalysts

In this paper, the microstructure of a 1 wt.% Cu/γ-Al₂O₃ catalyst that was reduced in a 4% hydrogen/argon atmosphere at temperatures of 523, 773 and 1073 K, is studied by Z-contrast imaging and electron energy-loss spectroscopy (EELS) in a scanning transmission electron microscope (STEM). Results show that the copper species are well dispersed when the catalyst is reduced below 523 K. At 773 K, separated Cu(I) and Cu(0) species are found existing as ring-like and bulk-like particles. This appears to indicate that the copper has not been reduced to its metallic form due to the interaction between the copper oxide and the support. Large spherical particles having core-shell structures with Cu(I) in the shells and Cu(0) in the cores are generated when the catalyst is reduced at 1073 K. The formation of partially oxidized copper species upon reduction at 1073 K is attributed to the metallic copper interaction with the alumina support. This study also demonstrates that high-spatial resolution Z-contrast imaging and EELS performed simultaneously can provide unique information on the morphology and chemistry of metal species in supported metal catalysts.     

Enthalpic relaxation in semi-crystalline PEEK

The effect of crystallisation on the glass transition temperature and enthalpic relaxation in poly(ether ether ketone) (PEEK) has been investigated. The increase in glass transition temperature and the activation enthalpy of ageing is explained in terms of the amorphous phase being constrained by the crystallites. The extent of enthalpic relaxation with time has been analysed in terms of the Cowie-Ferguson model and the β value was found to be dependent on both temperature and the crystalline morphology, changes in the co-operativity of the relaxations are used to explain this observation.     

用分步沉积法去除Nb(OH)5/Ta(OH)5中Ti,Sb等金属杂质的工艺研究

从理论和实践应用方面，研究了在不同活性金属离子存在的条件下控制pH值，应用分步沉积的方法去除Nb(OH)5/Ta(OH)5中某些金属杂质。在一定温度下，可在不影响Nb(OH)5/Ta(OH)5沉积的条件下，达到有效去除Ti，Sb，Sn，Al，Fe等杂质元素的目的。     

MLS结构的电容-电压特性

本文报导在 Si 衬底上拉制聚酰胺 LB 膜的电容-电压特性,结果表明:它具有与其它绝缘膜相似的特性,为聚酰胺 LB 膜应用于场效应器件奠定了基础。     

Au（Ⅲ）—PAR络合吸附波的研究

金与PAR(4-(2-吡啶偶氮)间苯二酚)的络合物在HAc-NaAc底液中于-0.43V处有一灵敏的络合吸附导数波,波高与金浓度在0.1～1.8μg/ml范围内呈线性关系,可用于分析测定。研究了该波的性质及电极过程,测定了该络合物的组成及表观稳定常数。     

高密度聚乙烯6300M和2480的耐环境应力开裂性能研究

研究了成型塑料管材的两种牌号的高密度聚乙烯(HDPE)6300M和2480的耐环境应力开裂(ESCR)性能。研究中采用的测试方法为一般弯曲试片法、在管上取样的弯曲试片法和恒定压应变法-压缩环法。根据两种材料测试结果及与其他牌号HDPE测试数据比较,对他们的ESCR进行评价,并讨论和解释了HDPE结构参数,ESCR与韧性形变和脆性断裂之间的联系。     

北京地区膳食摄入^232Th吸收入体液份额f1值的探讨

从北京地区公众成年人~(232)Th 的膳食日食入量,空气日吸入量,以及骨中~(232)Th 的沉积量出发,利用 ICRP 30号报告中参考人的代谢参数和内照射的库室模型,估算了北京地区公众成年人膳食摄入~(232)Th 后经胃肠道向体液转移份额 f_1值。结果表明,对于公众中成年人0.005是 f_1值的合适代表值,是 ICRP 30号报告推荐值 f_1=0.0002的25倍。虽然 ICRP 推荐值并不用于公众,但可以对群体有所了解;而北京地区从实测数据资料出发导出的 f_1值可能是更适于公众的。     

制氢尾气二氧化碳回收装置设计

对制氢尾气二氧化碳的回收装置进行了简捷设计，流程分析，并对换热装置的换热量和传热面积给出了算法和有关数据。