双抽机组工况图的画法分析

双抽机组热-电负荷关系非常复杂，运行人员难于分配。介绍一种较精确的工况图画法，可以为电厂运行人员提供可靠的基础。     

AKIMA方法在EXAFS谱解析中的应用

解析扩展Ｘ射线吸收精细结构谱（ＴｈｅＥｘｔｅｎｄｅｄＸ－ｒａｙＡｂｓｏｒｐｔｉｏｎＦｉｎｅＳｔｒｕｃｔｕｒｅＥＸＡＦＳ）的一种方法是曲线拟合，在曲线拟合中，能量阈值Ｅ０的确定有着很重要的意义，同时也有相当的难度，本文应用ＡＫＩＭＡ平滑数据点方法达到了对Ｅ０在数学意义上的精确求解，数据分析结果表明，这种方处理结果是令人满意的。     

Experimental investigation and thermodynamic modeling of the Mg–Sn–Sr ternary system

The isothermal sections of the Mg–Sn–Sr ternary system in the Mg-rich region at 415 and 350 °C have been determined using the scanning electron microscopy (SEM) equipped with energy dispersive X-Ray spectrometry (EDS). The existence of the MgSnSr ternary compound was confirmed in these two isothermal sections. Two new compounds, named Mg₅Sn₃Sr and Mg₂₅Sn₂₄Sr_14, were found in the present work based on the SEM/EDS results. Thermodynamic optimization of the Sn–Sr binary and Mg–Sn–Sr ternary systems were carried out using the CALPHAD (CALculation of PHAse Diagrams) technique. The Modified quasi-chemical model (MQM) was used for the liquid solution which exhibits a high degree of short-range ordering behavior. The solid phases were described with the Compound energy formalism (CEF). Finally, a self-consistent thermodynamic databases for the Mg–Sn–Sr ternary system has been constructed in the present work, which can be an efficient and convenient guidance to investigate and develop the Mg-based alloys.     

基于IEC61131-3标准的PLC编辑模块设计与实现

基于IEC61131-3标准设计一个可编程逻辑控制器（PLC）编辑模块,并给出了主要数据结构和算法的设计。通过测试表明用户界面友好,操作简单,对后续开发具指导意义。     

A faster divide-and-conquer algorithm for constructing delaunay triangulations

An easily implemented modification to the divide-and-conquer algorithm for computing the Delaunay triangulation ofn sites in the plane is presented. The change reduces its (n logn) expected running time toO(n log logn) for a large class of distributions that includes the uniform distribution in the unit square. Experimental evidence presented demonstrates that the modified algorithm performs very well forn2¹⁶, the range of the experiments. It is conjectured that the average number of edges it creates—a good measure of its efficiency—is no more than twice optimal forn less than seven trillion. The improvement is shown to extend to the computation of the Delaunay triangulation in theL _p metric for 1<p.This research was supported by National Science Foundation Grants DCR-8352081 and DCR-8416190.     

65Mn钢CCT曲线及圆锯片淬火工艺

用全自动相变测定仪测定了圆锯片常用６５Ｍｎ钢的连续冷却转为曲线，研究了不同连续冷却速度下得到的组织，为合理制订圆锯片的淬火工艺提供了依据，得到了最佳淬火工艺曲线。     

Simulation of polycrystalline aluminum tensile test with crystal plasticity finite element method

The crystal plasticity was implemented in the finite element method（FEM） software ABAQUS through the user subroutine UMAT. By means of discretizing the space at the grain level with the Voronoi diagram method, a polycrystal model was built and used in the FEM analysis. The initial orientation of each grain was generated based on the orientation distribution function（ODF）. The developed model was successfully applied in simulation of polycrystalline aluminium samples deformed by the tensile tests. The theoretical strain--stress relation was in good agreement with the experimental result. The simulation results show that the grain size has significant effect on the deformation behavior. The initial plastic deformation usually occurs at grain boundaries, and multiple slip often results in an enhanced local hardening at grain boundaries.     

Bi-Pb-Tl三元系相图

用室温、高温X射线衍射及淬火的方法,测定了Bi-Pb-Tl三元系25℃的等温截面及该体系中的相结构。     

EFFECT OF ALLOY ELEMENTS ON QUASIEQUILIBRIUM MICROSTRUCTURE IN Fe-Mn-Ni-Cr STEELS

The microstructures of Fe-Mn-Ni-Cr steels with medium carbon and the effect of alloy ele-ments on them have been investigated by means of X-ray diffraction quantitative phase ana-lyses,metallography and hardness tests.The volume fraction of martensite in steels quenchedat 1100℃ can be expressed as:f_M~(1100)=162.643-15.482Mn-7.36Ni-4.286(Cr+Mo+V)Based on this expression,the quasi-equilibrium microstructure diagram has been obtained.Itis shown that the effect of Mn on the austenite stability is greater than that of Ni.The equiva-lent [Ni]=2.104Mn+Ni and equivalent [Cr]=Cr+Mo+V.The driving force for martensite transformation at M_s point has been calculated to hedrastically decreased by element Mn.     

QUASI-EQUILIBRIUM MICROSTRUCTURES AND EFFECT OF ALLOY ELEMENTS IN Fe-Mn-Ni-Cr STEELS

本文利用X射线定量相分析及金相观察和硬度测试,考察了中碳Fe-Mn-Ni-Cr钢的组织及合金元素的作用。建立了经1100℃淬火后的马氏体体积分数与合金成分的定量关系式; f_M~(1100)=162.643-15.482Mn-7.36Ni-4.286(Cr+Mo+V)并在此基础上给出了亚平衡组织图。结果表明,Mn稳定奥氏体的作用大于Ni的作用。Ni和Cr当量分别以[Ni]=2.104Mn+Ni,[Cr]=Cr+Mo+V表示。计算了M_S点处的马氏体相变驱动力,指出Mn具有强烈降低相变驱动力的作用。