Surveillance test policy optimization through genetic algorithms using non-periodic intervention frequencies and considering seasonal constraints

In order to maximize systems average availability during a given period of time, it has recently been developed a non-periodic surveillance test optimization methodology based on genetic algorithms (GA). The fact of allowing non-periodic tests turns the solution space much more flexible and schedules can be better adjusted, providing gains in the overall system average availability, when compared to those obtained by an optimized periodic test scheme. This approach, however, turns the optimization problem more complex. Hence, the use of a powerful optimization technique, such as GA, is required.Considering that some particular features of certain systems can turn it advisable to introduce other specific constraints in the optimization problem, this work investigates the application of seasonal constraints for the set of the Emergency Diesel Generation of a typical four-loop pressurized water reactor in order to planning and optimizing its surveillance test policy. In this analysis, the growth of the blackout accident probability during summer, due to electrical power demand increases, was considered. Here, the used model penalizes surveillance test interventions when the blackout probability is higher.Results demonstrate the ability of the method in adapting the surveillance test policy to seasonal constraints. The knowledge acquired by the GA during the searching process has lead to test schedules that drastically minimize test interventions at periods of high blackout probability. It is compensated by more frequent redistributed tests through the periods of low blackout probability in order to improve on the overall average availability at the system level.     

Partitioning multiple objective optimal solutions with applications in radiotherapy design

The optimal partition for linear programming is induced by any strictly complementary solution, and this partition is important because it characterizes the optimal set. However, constructing a strictly complementary solution in the presence of degeneracy was not practical until interior point algorithms became viable alternatives to the simplex algorithm. We develop analogs of the optimal partition for linear programming in the case of multiple objectives and show that these new partitions provide insight into the optimal set (both pareto optimality and lexicographic ordering are considered). Techniques to produce these optimal partitions are provided, and examples from the design of radiotherapy plans show that these new partitions are useful. A. Holder. Research conducted at Trinity University, TX, and The University of Mississippi, MS. This research was partially supported by ONR Grant N00014-01-1-0917.     

基于遗传算法的工作辊温度场参数优化模型

针对热连轧机工作辊热辊形计算中温度场模型的热交换等参数难以确定的问题 ,建立了基于遗传算法的参数优化模型 ,可以解决复杂条件下的热参数的求解问题。利用优化参数计算的轧辊温度场与实际测量结果一致。     

Minimizing total weighted completion time when scheduling orders in a flexible environment with uniform machines

We consider the scheduling of orders in an environment with m uniform machines in parallel. Each order requests certain amounts of k different product types. Each product type can be produced by any one of the m machines. No setup is required if a machine switches over from one product type to another. Different product types intended for the same order can be produced at the same time (concurrently) on different machines. Each order is released at time zero and has a positive weight. Preemptions are allowed. The completion time of an order is the finish time of the product type that is completed last for that order. The objective is to minimize the total weighted completion time. We propose heuristics for the non-preemptive as well as the preemptive case and obtain worst case bounds that are a function of the number of machines as well as the differences in the speeds of the machines. Even though the worst-case bounds we showed for the two heuristics are not very tight, our experimental results show that they yield solutions that are very close to optimal.     

A Class of Algorithms for Collision Resolution with Multiplicity Estimation

The wireless connectivity in pervasive computing has ephemeral character and can be used for creating ad hoc networks, sensor networks, connection with RFID (Radio Frequency Identification) tags etc. The communication tasks in such wireless networks often involve an inquiry over a shared channel, which can be invoked for: discovery of neighboring devices in ad hoc networks, counting the number of RFID tags that have a certain property, estimating the mean value contained in a group of sensors etc. Such an inquiry solicits replies from possibly large number of terminals n. This necessitates the usage of algorithms for resolving batch collisions (conflicts) with unknown conflict multiplicity n. In this paper we present a novel approach to the problem of collision resolution for batch conflicts. We show how the conventional tree algorithms for collision resolution can be used to obtain progressively accurate estimation of the multiplicity. We use the estimation to propose a more efficient binary tree algorithm, termed Estimating Binary Tree (EBT) algorithm. The EBT algorithm is suited for implementation when the conflicting nodes are passive, such as e.g. RFID tags. We extend the approach to design the Interval Estimation Conflict Resolution (IECR) algorithm. For n→∞ we prove that the efficiency achieved by IECR for batch arrivals is identical with the efficiency that Gallager’s FCFS algorithm achieves for Poisson packet arrivals. For finite n, the simulation results show that IECR is, to the best of our knowledge, the most efficient batch resolution algorithm reported to date.     

Genetically optimized fuzzy polynomial neural networks with fuzzy set-based polynomial neurons

In this paper, we propose and investigate a new category of neurofuzzy networks—fuzzy polynomial neural networks (FPNN) endowed with fuzzy set-based polynomial neurons (FSPNs) We develop a comprehensive design methodology involving mechanisms of genetic optimization, and genetic algorithms (GAs) in particular. The conventional FPNNs developed so far are based on the mechanisms of self-organization, fuzzy neurocomputing, and evolutionary optimization. The design of the network exploits the FSPNs as well as the extended group method of data handling (GMDH). Let us stress that in the previous development strategies some essential parameters of the networks (such as the number of input variables, the order of the polynomial, the number of membership functions, and a collection of the specific subset of input variables) being available within the network are provided by the designer in advance and kept fixed throughout the overall development process. This restriction may hamper a possibility of developing an optimal architecture of the model. The design proposed in this study addresses this issue. The augmented and genetically developed FPNN (gFPNN) results in a structurally optimized structure and comes with a higher level of flexibility in comparison to the one we encounter in the conventional FPNNs. The GA-based design procedure being applied at each layer of the FPNN leads to the selection of the most suitable nodes (or FSPNs) available within the FPNN. In the sequel, two general optimization mechanisms are explored. First, the structural optimization is realized via GAs whereas the ensuing detailed parametric optimization is carried out in the setting of a standard least square method-based learning. The performance of the gFPNN is quantified through experimentation in which we use a number of modeling benchmarks—synthetic and experimental data being commonly used in fuzzy or neurofuzzy modeling. The obtained results demonstrate the superiority of the proposed networks over the models existing in the references.     

Algorithms for multiprocessor scheduling with two job lengths and allocation restrictions

A variant of the High Multiplicity Multiprocessor Scheduling Problem with C job lengths is considered, in which jobs can be processed only by machines not greater than a given index. When C=2, polynomial algorithms are proposed, for the feasibility version of the problem and for maximizing the number of scheduled jobs.     

Perceptual evaluation of color gamut mapping algorithms

The recommendation of the CIE has been followed as closely as possible to evaluate the accuracy of five color gamut mapping algorithms (GMAs)—two nonspatial and three spatial algorithms—by psychophysical experiments with 20 test images, 20 observers, one test done on paper and a second one on display. Even though the results do not show any overall “winner,” one GMA is definitely perceived as not accurate. The importance of a high number of test images to obtain robust evaluation is underlined by the high variability of the results depending on the test images. Significant correlations between the percentage of out‐of‐gamut pixels, the number of distinguishable pairs of GMAs, and the perceived difficulty to distinguish them have been found. The type of observers is also important. The experts, who prefer a spatial GMA, show a stronger consensus and look especially for a good rendering of details, whereas the nonexperts hardly make a difference between the GMAs. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 470–476, 2008     

An efficient parallel strategy for the perfect domination problem on distance-hereditary graphs

A graph is distance-hereditary if the distance stays the same between any of two vertices in every connected induced subgraph containing both. Two well-known classes of graphs, trees and cographs, both belong to distance-hereditary graphs. In this paper, we first show that the perfect domination problem can be solved in sequential linear-time on distance-hereditary graphs. By sketching some regular property of the problem, we also show that it can be easily parallelized on distance-hereditary graphs.     

计算几何与并行算法

本文首先介绍了计算几何的基本概念,论述了计算几何的四个基本问题,即几何搜索问题、相交问题、邻接问题及凸壳问题。然后重点分析了凸壳构造问题,介绍了其最佳串行算法、及相应的并行算法。接着对一些计算几何的串行及并行算法进行了分析比较。最后提出了笔者对新一代并行计算机系统上设计计算几何并行算法的看法。