A neural-network-based exponential H∞ synchronisation for chaotic secure communication via improved genetic algorithm

In this study, a novel approach via improved genetic algorithm (IGA)-based fuzzy observer is proposed to realise exponential optimal H^∞ synchronisation and secure communication in multiple time-delay chaotic (MTDC) systems. First, an original message is inserted into the MTDC system. Then, a neural-network (NN) model is employed to approximate the MTDC system. Next, a linear differential inclusion (LDI) state-space representation is established for the dynamics of the NN model. Based on this LDI state-space representation, this study proposes a delay-dependent exponential stability criterion derived in terms of Lyapunov's direct method, thus ensuring that the trajectories of the slave system approach those of the master system. Subsequently, the stability condition of this criterion is reformulated into a linear matrix inequality (LMI). Due to GA's random global optimisation search capabilities, the lower and upper bounds of the search space can be set so that the GA will seek better fuzzy observer feedback gains, accelerating feedback gain-based synchronisation via the LMI-based approach. IGA, which exhibits better performance than traditional GA, is used to synthesise a fuzzy observer to not only realise the exponential synchronisation, but also achieve optimal H^∞ performance by minimizing the disturbance attenuation level and recovering the transmitted message. Finally, a numerical example with simulations is given in order to demonstrate the effectiveness of our approach.     

Parameter identification of periodical signals: Application to measurement and analysis of ocean wave forces

This article presents an approach based on state observers to identify the parameters of an unknown periodic force exerted on a mechanical system. This approach comprises two stages and can be executed in real time by using only displacement measurements. The first stage goal is the estimation of the coefficients of a Fourier series that approximates the periodic force. From the estimated coefficients, the phase and the amplitude of the signal can be simultaneously computed; and from the estimated force, in a second stage, the frequencies of the signal can be estimated. To perform the tasks at each stage, two state observers were designed. To show the applicability of the proposed approach, the reconstruction of a wave force affecting a marine structure as well as the computation of the amplitude and phase of its spectral components was taken as case of study. The performance of the state observer was examined by means of simulations and off-line tests carried out with experimental data. Such data were obtained by executing laboratory tests and measuring waves in the Caribbean sea.     

基于模糊辨识算法的蓄电池荷电状态测量方法与模块设计

针对蓄电池荷电状态在线监测中对准确度和测量速度的要求,本文提出采用模糊辨识算法对蓄电池进行系统辨识。并通过对蓄电池的荷电状态与内阻、端电压数据的分析,建立了蓄电池荷电状态的模糊规则模型,并以此进行蓄电池荷电状态的测量,得到均方误差为0.0052。测量结果表明基于模糊辨识算法的蓄电池荷电状态测量能够满足蓄电池在线监测的要求,且易于硬件实现。文章还使用DSP Builder设计了蓄电池荷电状态测量模块,其中内阻测量采用了特征分解谱估计的信号提取方法,荷电状态测量则实现了模糊辨识算法所得出的模糊规则模型的运用。     

Finite time control of robotic manipulators with position output feedback

This paper deals with the robust finite time tracking of desired trajectories for a wide group of robotic manipulators in spite of unknown disturbances, uncertainties, and saturations of actuators while only manipulator's positions are available and its velocities are not measurable physically. A new form of chattering‐free second order fast nonsingular terminal sliding mode control scheme is introduced to design input torques for fulfilling the determined tracking objective in the adjustable total finite settling time. The proposed control algorithm is incorporated with two nonlinear observers to estimate disturbances and velocities of joints within finite settling times. The global finite time stability of the closed‐loop manipulator is analytically proved. Finally, a numerical simulation is carried out to verify the effectiveness of the designed input torques. Copyright © 2017 John Wiley & Sons, Ltd.     

Road Friction Coefficient Real-Time Identification Based on the Tire Dynamic Friction Model

Road friction coefficient real-time estimation methods is an important issue and problem in automotive active safety con- trol system development. First a fixed feedback gain sliding mode observer of road adhesion coefficient is designed through the es-tablishment of tire/road dynamic friction model in this article. The simulation results shows that the observer can well real-time iden-tify the current road adhesion characteristics. And more importantly, the observer only need wheel speed signal and the braking torque （brake pressure） signal, so the system is low cost, and its adaptability is good. There is no doubt this estimation method has a good application prospect.     

交流伺服电机速度与位置环的一体化鲁棒控制

提出一种交流伺服系统的离散域复合控制方案,可实现在未知负载条件下的准确位置控制。基于永磁同步电机伺服系统中位置与速度环组成的数学模型,以电机转角位置作为系统的测量反馈信号,设计一个降阶线性扩展状态观测器对电机转速（未量测）和未知负载扰动加以估计,并用于反馈控制和扰动补偿。采用TMS320F2812DSP在一台实际的永磁同步电机上进行了实验测试,结果表明伺服系统能在未知负载情况下实现平稳和准确的目标位置跟踪,且对负载和参数差异具有较好的鲁棒性。这种控制方案可方便地应用于相关的伺服系统。     

Time-local formulation and identification of implicit Volterra models by use of diffusive representation

We present a time-continuous identification method for nonlinear dynamic Volterra models of the form HX=f(u,X)+v with H, a causal convolution operator. It is mainly based on a suitable parameterization of H deduced from the so-called diffusive representation, which is devoted to state representations of integral operators. Following this approach, the complex dynamic nature of H can be summarized by a few numerical parameters on which the identification of the dynamic part of the model will focus. The method is validated on a physical numerical example.     

Interval observers for linear time-invariant systems with disturbances

It is shown that, for any time-invariant exponentially stable linear system with additive disturbances, time-varying exponentially stable interval observers can be constructed. The technique of construction relies on the Jordan canonical form that any real matrix admits and on time-varying changes of coordinates for elementary Jordan blocks which lead to cooperative linear systems. The approach is applied to detectable linear systems.     

Stabilization of linear systems over networks with bounded packet loss and its use in model predictive control

This paper considers stabilization of discrete-time linear systems, where network exists for transmitting the sensor and controller information, and arbitrary bounded packet loss occurs in the sensor–controller link and the controller–actuator link. The stabilization of this system is transformed into the robust stabilization of a set of systems. The stability result for this system is specially applied on model predictive control (MPC) that explicitly considers the satisfaction of input and state constraints. Two synthesis approaches of MPC are presented, one parameterizing the infinite horizon control moves into a single state feedback law, the other into a free control move followed by the single state feedback law. Two simulation examples are given to illustrate the effectiveness of the proposed techniques.     

Improving the state estimation for optimal control of stochastic processes subject to multiplicative noise

Computational models for the neural control of movement must take into account the properties of sensorimotor systems, including the signal-dependent intensity of the noise and the transmission delay affecting the signal conduction. For this purpose, this paper presents an algorithm for model-based control and estimation of a class of linear stochastic systems subject to multiplicative noise affecting the control and feedback signals. The state estimator based on Kalman filtering is allowed to take into account the current feedback to compute the current state estimate. The optimal feedback control process is adapted accordingly. The resulting estimation error is smaller than the estimation error obtained when the current state must be predicted based on the last feedback signal, which reduces variability of the simulated trajectories. In particular, the performance of the present algorithm is good in a range of feedback delay that is compatible with the delay induced by the neural transmission of the sensory inflow.