气相色谱法测定1,1-二氯-1-氟乙烷

研究了HCFC - 14 1b的气相色谱分析 ,色谱柱为HP - 1柱 ,氢火焰检测 ,相对误差在 5 %以内 ,该定量分析快速、简便、准确     

Enumerating maximal bicliques in bipartite graphs with favorable degree sequences

We propose an output-sensitive algorithm for the enumeration of all maximal bicliques in a bipartite graph, tailored to the case when the degree distribution in one partite set is very skewed. We accomplish a worst-case bound better than previously known general bounds if, e.g., the degree sequence follows a power law.     

Monitoring the linear alkylbenzene sulfonation process using high-temperature gas chromatography

Controlling the linear alkylbenzene sulfonate (LAS) sulfonation process is a critical part of the LAS manufacturing process; this process can be monitored by assaying for LAS content, unsulfonated linear alkylbenzene (LAB), and LAB sulfones. Traditionally, assaying the LAB and LAB sulfone contents has been time consuming and not straightforward. A simple and rapid procedure is described for the isolation and simultaneous capillary gas chromatographic (GC) quantification of LAB and LAB sulfones in LAS. The procedure involves extraction of the unsulfonated LAB and the LAB sulfones into n-heptane; sodium linear alkylbenzenesulfonate or linear alkylbenzenesulfonic acid (reacted to form sodium linear alkylbenzenesulfonate) remains in the aqueous extraction solvent layer. High-temperature capillary GC using a specialty metal capillary column enables both LAB and high molecular weight LAB sulfones to be quantified.     

鱼尾型机头中熔体流动的三维流场分析

本文利用ANSYS和MATLAB软件，对鱼尾型片材机头中熔体的速度、压力、剪切应力和粘度的分布进行三维有限元模拟和分析。探知了熔体在流道内的运动规律及特点并分析其原因，对口模设计具有定的指导作用。     

N-甲基乙酰氧基乙酰苯胺的液谱分析

本文研究了高效液相色谱测定N－甲基乙酰氧基乙酰苯胺的方法。采用Hypersil C18柱，以甲醇：水＝60：40（V／V）为流动相。该方法的变异系数为0．43％，回收率为98．9％－100．6％。     

Using ontology-based text classification to assist Job Hazard Analysis

The dangers of the construction industry due to the risk of fatal hazards, such as falling from extreme heights, being struck by heavy equipment or materials, and the possibility of electrocution, are well known. The concept of Job Hazard Analysis is commonly used to mitigate and control these occupational hazards. This technique analyzes the major tasks in a construction activity, identifies all potential task-related hazards, and suggests safe approaches to reduce or avoid each of these hazards. In this paper, the authors explore the possibility of leveraging existing construction safety resources to assist JHA, aiming to reduce the level of human effort required. Specifically, the authors apply ontology-based text classification (TC) to match safe approaches identified in existing resources with unsafe scenarios. These safe approaches can serve as initial references and enrich the solution space when performing JHA. Various document modification strategies are applied to existing resources in order to achieve superior TC effectiveness. The end result of this research is a construction safety domain ontology and its underlying knowledge base. A user scenario is also discussed to demonstrate how the ontology supports JHA in practice.     

动态保压注射成型技术对PA6/EPDM-g-MA 共混物相形态与力学性能的影响

采用动态保压注塑成型技术来控制分散相相形态和橡胶粒子在基体中的取向排列.纯尼龙,动态样与静态样具有相同的冲击强度.在加入橡胶后,动态样与静态样的冲击强度变化趋势基本一致,在橡胶含量为20%t时,体系完成脆韧转变冲击强度达到最大,在橡胶含量为30%和40%时冲击强度又下降.但与静态样相比,当橡胶含量为10%t时,动态样与静态样的冲击强度一致,而当橡胶含量超过10%时,动态样的冲击强度较静态样高.结合平行于熔体流动方向的SEM照片,在橡胶含量为10%时,动态样中的橡胶粒子与静态样一样并未被拉长与取向,而在橡胶含量超过10%时,动态样剪切层中的橡胶粒子被拉长且沿熔体流动方向取向.实验表明,在改善共混物界面相容性的基础上,适当的低剪切应力场能进一步提高橡胶分散相对冲击强度的贡献.     

乙烯装置长周期运行安全风险分析与对策

分析了中国石化茂名石化公司化工事业部乙烯装置长周期运行的安全风险,讨论了风险控制措施。结果表明:乙烯装置连续运行6年,其安全风险属于可容许风险。     

Modified Indigo Method For Gaseous And Aqueous Ozone Analyses

The indigo method developed by Bader and Hoigné for aqueous ozone analysis was modified to allow for both gaseous and aqueous ozone determination. Gas or water samples were extracted with a gas-tight syringe containing a known volume of indigo reagent. The modified procedure provided a more consistent basis for gaseous and aqueous ozone determination allowing for more accurate ozone mass balance calculations. Direct gaseous ozone UV absorbance with molar absorptivity of 3,000 M^?1cm^?1 at 258 nm was used as primary standard to determine the molar absorptivity of the indigo reagent. The molar absorptivity of indigo reagent, assuming a 1:1 stoichiometric ratio for the reaction between indigo and ozone, was determined to be 23,150 ± 80 M^?1cm^?1, or approximately 16 percent higher than that of 20,000 M^?1cm^?1 suggested by Bader and Hoigné. An independently calibrated membrane-electrode ozone monitor showed good correlation with indigo method results using the molar absorptivity value determined in this study. The apparent molar absorptivity of aqueous ozone at the wavelength of 258 nm measured by the modified indigo method increased from 2,400 to 3,600 M^?1cm^?1 in the investigated ozone concentration range of 0.4 to 11.0 mg/L. This variation might have been caused by the inherent interference of unidentified ozone byproducts, which presence was supported with scanning spectra in the wavelength range of 200 to 300 nm.     

3-溴-4-氟苯甲醛的气相色谱分析方法

采用气相色谱法,氢火焰离子化检测器,选用3%OV-17填充柱,正十三烷为内标,气化室和检测器温度为180℃,柱温120℃,对3溴4氟苯甲醛进行定量测定。该方法简单、快速、准确、适用,标准偏差0.26%,变异系数0.27%,平均回收率100.1%。