基于UC/GUI的嵌入式GUI在S3C 2410上的移植

嵌入式图形用户界面为嵌入式系统提供了人机交互界面,大大方便了嵌入式系统的人机交互,进而加速了嵌入式系统的流行。选择了基于UC/GUI的嵌入式GUI作为移植对象,并详细介绍了将其移植至S3C2410开发平台上的技术。该移植技术对于其他的嵌入式开发板也具有一定的参考价值。     

基于S3C2440嵌入式视频传输系统的研究与设计

如今嵌入式和视频行业发展的如火如荼,视频传输也得到了很好的发展,而很多视频传输设备都比较昂贵且移动不灵活.鉴于此,设计出了以S3C2440为核心芯片,并在此基础上结合linux环境下的GStreamer流媒体框架的视频传输系统,系统采用无线的传输方式.经过对系统测试,此系统能流畅的播放传输的视频并且移动灵活,达到预期目标,并且该系统简洁、成本低具备实际的应用前景.     

μ C/OS-II在车桥总成配置数据管理系统终端中的应用

基于Cortex-M3内核的ARM芯片STM32F107构建的车桥总成数据远程传输终端,包括了CAN通信、串口通信、人机接口、状态指示、电源等单元。CAN驱动芯片MCP2551实现CAN通信驱动,PS2键盘用于数据的录入与修改,LCM屏提供了人机接口对话。软件上嵌入μC/OS-II实时操作系统,建立CAN总线通信、串口通信、人机接口等多任务。实验表明,车桥总成配置数据的录入与修改操作简便,人机对话界面友好,CAN总线数据传输实时准确。     

Evolution of chemistry and morphology during the carbonization and combustion of rice husk

Both fine carbon/silica and pure silica powders can be obtained by carbonization and combustion of rice husk under non-isothermal conditions, and the products can be used for preparation of high-quality ceramic materials. Studies on the morphology, chemical and physical characteristics of products were carried out by N₂-adsorptionmeter, SEM, XRD, FTIR, ICP-MS and EA. Results indicate that decreasing the heating rate increased the specific surface area, pore volume and pore diameter. At a heating rate of 5 °C/min, the specific surface areas of both the carbon/silica and pure silica powders were 261 and 235 m²/g, and the average pore diameters were 2.2 and 5.4 nm, respectively. The products obtained from various heating rates were all amorphous. Thermogravimetric analysis was employed to study the reaction characteristics during carbonization or combustion, indicating that decomposition process of rice husk could be divided into three temperature zones. This results of the study can also provide the important information on the recovery of biomass material from rice husk.     

The effect of nitrogenous fertilizers on the nitrification of forest soils

The effect of fertilization with urea and ammonium nitrate on nitrogen mineralization was studied in a series of laboratory incubation experiments. The samples (humus layer) were collected from field experiments with different applications of fertilizers during a period of 11–14 years. The nitrogen fertilization influenced some chemical properties of the humus layer such as pH, N-Kjeldahl content and the content of inorganic nitrogen, especially in the samples from North Sweden. Nitrate nitrogen was formed in humus samples classified as non-nitrifying in several cases, usually after urea fertilization.     

基于Modbus/TCP协议实现人机界面与下位机通信

在以通用伺服电机控制系统为下位机的基础上,开发了以实时内核μC/OS-II、DSP、CPLD控制模块为核心的软硬件平台。通过移植uIP协议栈到DSP,在通信应用层上将Modbus帧嵌入到TCP帧中,简单可靠地实现了Modbus/TCP协议。同时将Modbus/TCP协议与μC/OS-II实时内核进行整合,更好地保证了系统调度的实时性。     

宽带直流放大器的增益控制设计与研究

首先进行了方案论证与比较,分析各种方案的优点缺点,最后选择亚德诺半导体公司生产的低噪声增益可控集成运算放大器AD603和电流反馈型宽带运算放大器AD811等器件设计宽带直流放大器。输入级采用两级AD603级联,输出级设计通频带0~10MHz的带宽,通过单片机可以对放大器增益进行控制。该放大器具有频带宽、功率高、增益可调、带宽可选择等特点。此外,对提高直流放大器的各种性能指标提出了多种具体措施,在要求较高的系统中具有较强的实用性。     

S3C6410和CR95HF的RFID读卡系统设计

针对目前读卡器主频低、速度慢、便携性差等不足,提出了一种基于S3C6410的RFID读卡系统设计方案。本文以高性能的S3C6410嵌入式微处理器为核心,选用新型的CR95HF射频芯片,开发设计了一款高主频的搭载Android嵌入式系统的新型手持式RFID读卡器。该读卡器工作在高频13.56MHz,支持ISO14443、ISO15693等多种协议。实验证明,该读卡器能对符合协议的标签进行读写操作,读写距离能够满足需要,具有便携、稳定性高、处理速度快等特点。     

实时物流递送路径规划与模拟

近些年来,顾客需求不断多样化、企业竞争更加激烈、全球制造的概念不断发展,不仅我国政府也将物流视为新的经济热点,而且已经引起了全球各个国家的重视。从政府到企业,从中央到地方,都开始物流战略的规划与实施,并且开始物流信息系统的建设。该文以物流路径规划系统为研究对象,介绍了一些著名的最优路径规划算法。在深入分析节约算法的基础上,提出并实现了配合Dijkstra算法的节约里程表算法,开发了以本文算法为核心的实时物流路径规划与模拟系统。     

Important issues in a molecular dynamics simulation for characterising the mechanical properties of carbon nanotubes

This paper discusses several important issues in a molecular dynamics simulation for analysing carbon nanotubes and their mechanical properties. In particular, the paper addresses the problems in selecting appropriate inter-atomic potentials, number of thermostat atoms, thermostat techniques, time and displacement steps and number of relaxation steps to reach the dynamic equilibrium. Based on these, the structural changes of armchair and zigzag nanotubes and their mechanical properties are investigated. The Young's modulus and Poisson's ratio of the armchair tube are 3.96 and 0.15 TPa, respectively, and those of the zigzag tube are 4.88 and 0.19 TPa, respectively. The best simulation technique identified in this study predicts that the ultimate tensile strain of a carbon nanotube is around 40% before atomic bond breakage.