Fatigue crack growth analysis of welded aluminium RHS T-joints with manipulated residual stress level

The fatigue life of a welded aluminium T‐joint made from beams with rectangular hollow section (RHS) has been predicted using a crack propagation analysis and compared with experimental results from joints with different residual stress levels. To include the effect of the residual stresses, the stress ratio was calculated at the weld toe and, via Walker's equation, introduced into the analysis. How to obtain the Walker exponent has been discussed in detail. The introduction of a stress ratio at the weld toe provides good agreement between the experimentally and analytically found S–N curves. The effect of the residual stress was successfully included in the analysis.     

New intramolecular effect observed for polyesters: An anomeric effect

A series of polyesters was prepared to evaluate hydrolytic stability as a function of cyclohexyl dibasic acid content. The three cyclohexyl dibasic acids: 1,2; 1,3; and 1,4 were formulated into polyesters with two glycols. The proportion of cis and trans isomers was evaluated via ¹H NMR. The hydrolytic stability of short chain polyesters was evaluated in an acetone/water mixture which solubilized the polyesters to mimic oligoester behavior within a thermosetting polyester coating environment. The rate of hydrolysis was monitored by acid titration and corroborated by GPC. Surprisingly, 1,2-cylohexyl diacid-based polyesters were robust, and 1,3-cyclohexyl diacid-based polyesters were the most susceptible to hydrolysis. Evidently, a 1,2-anchimeric effect for cyclohexyl dibasic acid polyesters was not an important consideration, while the 1,3-cyclohexyl ester interaction was. Consequently, an anomeric effect was proposed. Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

Effect of temperature on the development of the yam moth, Dasyses rugosella Stainton (Lepidoptera: Tineidae)

Studies on the effect of temperature on the development of the yam moth, Dasyses rugosella Stainton were carried out in the laboratory at four different temperatures, 20°C, 24°C, 29°C and 33°C. The mean fecundity per female at 20°C, 24°C, 29°C and 33°C was 37.6±1.9, 84.2±2.7, 112.3±3.9 and 109.3±3.9 eggs, respectively. Oviposition period ranged from 4.7 days at 20°C to 2.9 days at 33°C. Hatchability of eggs was highest at 29°C with 70.0% and lowest at 20°C with 15.0%. The developmental time decreased with increase in temperature. The mean developmental time at 20°C, 24°C, 29°C and 33°C was 13.8±0.3, 7.8±0.2, 5.1±0.2 and 3.9±0.2 days for the egg, 90.0±0.7, 50.1±0.7, 36.1±0.8 and 23.6±0.8 days for the larval stages, 22.3±2.6, 12.2±0.2, 10.1±0.1, and 7.8±0.2 days for the pupa and 126.1±0.8, 70.1±0.8, 51.3±0.9, and 35.1±0.8 days for the period from egg hatching to adult emergence, respectively. Since fecundity, oviposition and development of the moth were impaired at 20°C, storage of yam tubers at low temperatures (well below 20°C but not lower than 12°C to avoid chilling injury) will significantly retard the development of D. rugosella and help in its control. Unmated individuals lived longer than their mated counterparts. Adult females were always larger than the males. The wing span of the female ranges from 16.9-18.5 and in males from 13.0-15.0 mm. The body length for males ranged from 5.0-6.5 and was 6.5-9.0 mm for females.     

勘探地球物理技术最新进展——２００２年ＳＥＧ年会综述Ⅱ：解释与压力预测

根据2002年SEG年会部分论文编译而成，包括解释技术和压力预测技术。概要性地介绍了偏移成像技术；新属性技术；自动地震相分析技术；油气检测技术；储层反演技术和2种实用的压力预测技术。     

Understanding chemical reactions between carbons and NaOH and KOH: An insight into the chemical activation mechanism

Direct mixing of an anthracite with hydroxides (KOH or NaOH) and heat treatment up to 730 °C has shown to be a very good activation procedure to obtain activated carbons with very high surface areas and high micropore volumes. The reactions involved during the heat treatment of these hydroxide/anthracite mixtures have been analysed to deep into the fundamental of the knowledge of this chemical activation process, that has not been studied before. For this purpose, the present paper analyses the drying process, the atmosphere during the carbonisation, the chemical state of the activating agents (NaOH, KOH and Na₂CO₃) and the chemical reactions occurring during the heat treatment which have been followed by FTIR and TPD. The analysis of our results allows us to conclude that steam is a good atmosphere for the carbonisation process, alone or joined with nitrogen, but not as good as pure nitrogen. On the other hand, during the activation process, the presence of CO₂ should be avoided because it does not develop porosity. The reactions, and chemical changes, involved during this chemical process are discussed both from a thermodynamical point of view as well as identifying the reaction products (H₂ by TPD and Na₂CO₃ by FTIR). As a result, this paper helps to cover the present lack of understanding of the fundamentals of the reactions of an anthracite with hydroxides which are necessary to understand the activation of the material.     

Simulation of runoff and phosphorus transport in a Carpathian catchment,Slovakia

A comprehensive, GIS‐based modelling approach is developed to estimate runoff and phosphorus transport within a watershed at a daily time step. The approach relies on the use of GIS data for deriving major critical model parameters that exhibit distinct spatial variability over the catchment. Surface runoff is calculated by a modified rational method, which depends upon rainfall intensity, soil moisture status, slope, land‐use and soil characteristics. Phosphorus loading is estimated as a function of the runoff volume and the event mean concentration for different land use categories. A diffusive approximation method is used to trace runoff and phosphorus transport to the basin outlet. The modelling approach is tested in the Margecany catchment, Hornad River basin, Slovakia, to simulate runoff, phosphorus loading, and its transport on a daily time scale using data observed between 1995 and 2000. Satisfactory results of the hydrographs and phosphorus concentration at the basin outlet are obtained, though more efforts regarding the phosphorus cycling and its biochemical reactions need to be clarified by further research. Copyright © 2006 John Wiley & Sons, Ltd.     

基于遗传算法的工作辊温度场参数优化模型

针对热连轧机工作辊热辊形计算中温度场模型的热交换等参数难以确定的问题 ,建立了基于遗传算法的参数优化模型 ,可以解决复杂条件下的热参数的求解问题。利用优化参数计算的轧辊温度场与实际测量结果一致。     

浅谈变频器供电条件下电动机的温升与对策

随着变频调速技术的蓬勃发展，变频器供电电机的温升问题已引起人们的广泛关注。本文首先讨论了电动机的温升限度；然后结合感应电机温升实验的相关数据分析了变频器供电对电动机温升的影响及其原因；最后从降低发热量和提高散热能力两方面提出缓解电机温升的措施，并指出了实际应用中应注意的问题。     

可靠性预计方法及思考

本文介绍了可靠性预计的目的,并对当前较为常见的可靠性预计模型或方法做了比较和说明,也对造成可靠性预计局限性的原因做了分析,最后对在可靠性工程工作中对待可靠性预计的态度做了探讨.     

Effects of circumferential pick spacing on boom type roadheader cutting head performance

Effects of equal and unequal circumferential pick spacing on the performance of boom type roadheaders having cylindrical cutting heads are investigated. For this purpose, two experimental cutting heads with equal and unequal circumferential spacing are designed and manufactured. The cutting head with unequal circumferential spacing is specifically designed to prevent tool-holder overlap at the nose section. Manufacturing difficulties associated with equal circumferential pick spacing due to tool-holder overlap are discussed with solid modeling and practical applications. The heads are tested at Park Cayirhan Coal Mine in Turkey and their cutting performances are analysed. Although better cutting performance for equal circumferential spacing are predicted by force–balance analysis, in situ measurements of instantaneous (net) traversing speed and cutting rate, pick consumption rate and machine vibration show that no significant difference exists between the performances of the two cutting heads.