���������Ʊ�ը����ֵģ��

可燃气体在运输、储存、加工和使用过程中，因可燃气体泄漏而形成的气云爆炸事故，常常会造成巨大的人员伤亡和财产损失。研究气云爆炸的特性和威力，可防范事故，减小损失。中采用有限差分方法编制了求解可燃气云爆炸过程的定解方程的数值模拟程序。方程组中的源项由能量均匀加入法处理，爆炸场中的间断问题通过人工黏性模型处理。经开敞空间乙炔——空气气云爆炸实验结果检验，数值计算结果的偏差在13％以内。计算结果表明，气云半径越大，爆炸最大压力和压力增加速率越大；气云爆热越大，爆炸最大压力和压力增加速率越大。     

屏蔽电泵运行中存在问题的分析与改进

对屏蔽电泵在非设计流量下工作存在较大的轴向力不平衡，造成前端轴承磨损严重进行了分析。在不降低效率的情况下，在屏蔽电泵的泵头加入平衡盘使轴向力得到平衡，并取得了满意的效果。     

Empirical Evaluations of Usage-Based Reading and Fault Content Estimation for Software Inspections

This thesis describes six empirical investigations of two techniques applied to software inspections, namely reading techniques and fault content estimation techniques. The first part of the thesis presents a series of experiments of a novel reading technique called usage-based reading. The second part investigates fault content estimation applied to the software inspection process. The estimation methods used are capture-recapture and curve fitting.     

Use of a neural network to link AFM etch patterns to plasma parameters

Plasmas play a critical role in depositing thin films or etching fine patterns while manufacturing integrated circuits. A new model for plasma diagnosis is presented. This was accomplished by linking atomic force microscopy (AFM) to plasma parameters using a neural network. Experimental AFM data were collected during the etching of silicon oxynitride films in C₂F₆ inductively coupled plasma. Surface roughness of etched patterns was characterized by means of discrete wavelet transformation. This led to the construction of three vertical (type I), diagonal (type II), and horizontal (type III) wavelet coefficient-based models. The performance of diagnosis models was evaluated in terms of the prediction and recognition accuracies. Both accuracies were optimized as a function of the number of hidden neurons. Comparisons revealed that the type I model yielded the largest recognition and the smallest prediction error. This was demonstrated even under stricter monitoring conditions. More improved diagnosis is expected by enhancing AFM resolution.     

定向井和水平井套管柱的优化设计

为了满足定向井和水平井套管设计的要求 ,在综合分析套管设计理论和方法的基础上 ,通过对套管柱载荷的计算 ,建立了其优化设计模型 ,利用数据库技术 ,研制出套管柱优化设计软件 ,并通过计算实例给出了软件的操作过程。软件界面友好 ,操作简单 ,功能齐全 ,设计者在进行套管设计时 ,只需输入设计所需基本参数 ,按界面提示操作即可完成全部设计工作 ,便于现场实际推广应用。     

关于引入劳动力市场价位的思考

引入劳动力市场价位是企业薪酬制度改革的必然趋势。系统研究和分析了劳动力市场价位的基本特征;提出企业在引入劳动力市场价位过程中应该遵循的基本原则。     

Cost estimates to guide pre-selection of processes

A process is a method of shaping, joining or surface-treating a material. Process selection has three steps. The first is to identify from the ‘menu’ of all available processes, the subset, which can give a chosen material the desired shape with the desired detail, precision and finish. The second is to choose, from among these, the ones that will do so at the lowest cost. The final step is to investigate the most promising processes in depth, exploring considerations such as availability, in-house experience, safety and environmental issues. The first two steps can be thought of as process pre-selection. Components have to be assembled and finished to create products. Here too, the ability to rank by cost, however crudely, helps guide pre-selection. Cost models are reviewed from the perspective of material and process selection. An approximate model is useful provided it has generality—that is, it must allow comparison of very different processes. Many approaches fail in this. One that works, based on resource consumption, is developed here and its use for selection is illustrated. It has been implemented as part of a tool that allows rapid pre-selection from a database of 112 processes.     

定容气田开发规划概算法

基于物质平衡方程、产能方程和递减方程的结合,提出了定容气田开发规划的概算法.该法可用于预测地层压力、井底流动压力、井口流动压力和稳产年限.实际应用表明,本文提供的方法是实用有效的.     

Numerical modelling for scattering of waves in three-dimensional cracked material

In this paper, a mathematical model is proposed for the problem of the scattering of plane waves in a three-dimensional cracked materials. Instead of obtaining closed-form solutions as in conventional theoretical analysis methods, this approach, called the Equivalent Nodal Force (ENF) method formulates the mechanical effects of cracks as an equivalent nodal force in a numerical procedure, and physically translates cracked material into an equivalent continuous one. Several mechanical relations between waves and cracks are evident from this method. Also the results of several numerical calculations are presented and these are compared with those obtained by the conventional methods.     

厚度控制技术在中厚板轧制生产中的应用

本文探讨了影响中厚板厚度波动的因素，结合安钢中板厂2800mm轧机按合同轧制一批交货重量不大于理论重量船板的生产实践，总结了实际生产中实现高精度厚度控制的有效方法。