焦化加热炉爆管故障分析与预防

焦化加热炉炉管内的物料通常为有杂质容易结焦的混合渣油,如果设计不合理、操作控制不当、运行周期过长等,极易造成炉管爆管事故。以2005年9月大庆石化分公司炼油厂焦化加热炉爆管故障为例,阐述了焦化加热炉的爆管原因、故障处理及预防措施,认为注水量小、渣油中含催化剂、负荷偏离设计工况、烧焦周期和烧焦速度不当等引起严重结焦是爆管的主要原因。     

热收缩套管及其成型方法

本文介绍了热收缩套管的收缩机理及成型方法，如气压吹胀法、机械扩张法和缠绕法等。并对管材结构、原料及主要工艺技术简要地进行了比较和评价。     

Dynamic responses and damages of water-filled pre-pressurized metal tube impacted by mass

An account is given of some principal observations made from a series of experiments in which three-span pipe beams were subjected to central impact by indenters with different nose shapes. These pipes were filled and pre-pressurized with water in order to identify the main effects produced by the fluid–structure interaction. In comparison, the impact experiments of the pipes with no water were also carried out. The perforation failure modes and corresponding critical impact energies were obtained in different test conditions. The experimental results indicated that the critical perforation energy and the deformation of the wall of the pipe were significantly influenced by the presence of the water and the pressure.     

Systematic modeling and model handling for manpower planning systems

The primary purpose of this paper is to show an efficient way of handling models and model data in a decision support system, in which it is usual to consider several variants of a model. The model data primarily consist of model-defining data, but the same approach may be used for the generated results as well. By efficient handling is meant the handling by the computer as well as by the user. For the user it is particularly important that new models can be conveniently defined as variants of existing models. The approach is introduced within the context of a decision support system for manpower planning based on Markov models. In the mean time the same approach has been used for the implementation of other decision support systems and has been found to be more generally applicable.     

连轧管机组与Accu-Roll轧管机组的比较

介绍了连轧管机组和Accu-Roll轧管机组的发展概况和优缺点，结果得出，连轧管机组大多数指标优于Accu-Roll轧管机组。     

内复合换热管与复合管板焊接工艺试验研究

介绍复合管与复合管板的管头设计及其焊接试验,结果表明,如果管内壁不锈钢复合层的厚度达到或大于0.5mm,则管头的焊接质量能满足要求,否则管头焊缝容易开裂。内、外双面复合管和复合管板的管头焊接工艺,与仅有内壁单层不锈钢复合层的复合管和复合管板的管头焊接工艺相同。     

Plastic instability in dual-pressure tube-hydroforming process

The tube-hydroforming process has become an indispensable manufacturing technique in recent years. Successful tube hydroforming requires bulging to take place without causing any type of instability such as bursting, wrinkling or buckling. The dual-pressure tube-hydroforming process was introduced to achieve a favorable tri-axial stress state in the deformation process. In this paper, the effect of applying counter pressure on plastic instability of thin-walled tubes is analyzed. It is concluded that in dual-pressure tube hydroforming, the onset of plastic instability is delayed and the ductility of the metal is increased.     

衡阳钢管厂Φ89mm半浮芯棒连轧管机组工艺及设备结构特点

衡阳钢管厂Φ８９ｍｍ半浮芯棒连轧管机组是一种新型机组，其选配的变形工艺路线能很好地适应生产小规格的热轧无缝钢管。本文论述了该机组的工艺及设备结构特点。     

焊缝X射线照相中以透照距离为参变量的管电压计算方法

针对钛、钢焊缝X射线照相探伤中,要通过实验来确定管电压值,存在低效、浪费的问题,作者总结大量探伤工作中的数据,找出了对于不同透照方式和不同透照条件下,管电压值与试样厚度和透照距离之间的关系,建立了计算管电压值的经验公式,并对计算值与实验值作了对比分析,证实经验公式简便可靠。文中给出了适用于国内广泛采用的几种X光探伤机和通用的几种感光胶片的管电压计算公式及有关数据,可供钛、钢X光探伤工作者参考应用。     

筒形件强力旋压新技术--浮动芯模法

提出了一种新的旋压方法－浮动芯模法。该方法采用的芯模长度尺寸较小,两端不固定加工,制造和安装非常容易。由于该方法是采用旋轮不动,工件做轴向运动,故解决了正旋所带来的工件扭曲的问题。此法用于加工长管类件,更显示出它的优越性,对改善管类件的加工具有重要的意义。