喷丸对连杆疲劳强度的影响

本文阐述了喷丸强化提高连杆表面质量和疲劳寿命。经喷丸处理,其试片弧高度迟到0.7mm时,疲劳极限提高了19%,达到440MPa,连杆实物疲劳强度试验结果表明,喷丸复盖率影响强化效果,文中还叙述了喷丸强化层应力分布的X射线应力测定工作。     

基于类库思想的Powerbuilder录入界面实现

在ERP及其他数据库开发项目中．方便而操作风格一致的录入界面是被用户所广泛要求的。笔者在工程项目中总结了部分用户需要的功能．并在PowerBuilder中以基类的形式实现．在加快工程进度和方便用户方面取得了不错的效果。     

残余应力对55SiMnVB弹簧钢疲劳性能的影响

研究了５５ＳｉＭｎＶＢ弹簧钢板疲劳断口特征及裂扩展过程。结果表明，喷丸强化在表层产生的残余压应力可明显提高疲劳抗力，增强裂纹闭合效应，降低裂纹扩展速度。     

Application of stochastic filtering for lifetime prediction

This paper introduces a stochastic filtering modeling approach for predicting the remaining lifetime of a component based on information on the stochastic degradation process and uncertain condition monitoring measurements. The model is illustrated by a case study, where the degradation is assumed to be a simplified fatigue crack growth process. The model accounts for uncertainties in both degradation process and condition measurements in a sound way. If completed with information on costs of monitoring, failure and replacement, such model could be used in optimizing both the condition monitoring intervals and, e.g. the replacement time for the component.     

Prediction of fatigue behaviour in stress-concentrators of arbitrary geometry

A new method is outlined which aims to predict high-cycle fatigue behavior of components which fail from stress-concentrators. This involves examination of the stress field in the vicinity of the stress-concentrator, and comparison with stress fields for cracks at known stress intensities. Methods which are currently used for simple notch geometries can thus be generalised, making the approach applicable to stress concentrators of any geometry. The method of prediction is shown to be stable, providing a solution of good accuracy when compared to analytical methods for standard specimen geometries. Favourable comparisons with experimental data have been achieved both for standard notches and for a corner geometry which represents a typical component case.     

Cyclic X-Y mechanical tests: A new method to perform in situ reversed-deformation experiments in the high-voltage electron microscope

There has been, in the past, only limited success with in situ cyclic or reversed plastic deformation tests in the transmission electron microscope (TEM). This is probably partly due to problems associated with buckling of the foil when an applied tensile or shear stress is reversed. Mechanical analysis shows that dislocation movement can be reversed by tensile stressing in alternating perpendicular directions (i.e., 90° rotations of a tensile stress); thus buckling of the foil can be avoided. A design for performing such X-Y in situ TEM tests is presented, with observations that demonstrate its feasibility.     

Stress concentration and fatigue of profiled reinforcing steels

Stress concentrations arise from profiles of ribbed reinforcing steel bars and in this study the results of calculated stress concentration factors (SCF), by using finite element method, are related to the fatigue test results. It is apparent that the degree of confinement of a ribbed bar embedded in concrete not only affects the magnitude of the ultimate bond stress but also the bond stress-slip relation. Thus the rib geometry or profile pattern is designed for optimum bond characteristics and not for fatigue considerations. However the rib geometry influences the fatigue performance through the SCFs arising from the root radius, width and flank angles of the profiles. It is shown that these latter factors have a significant influence on the fatigue behaviour of reinforcing steel bars.     

一种用户行为分析的动态备份机制

目前大多数分布式存储系统采用静态备份机制保证系统的高可靠性,灵活性差,不适合系统规模及用户访问量不断变化的存储系统．因此提出一种基于用户行为分析的动态备份机制,通过分析用户行为获得相关信息来动态改变备份数量及确定备份位置,具有较强的灵活性,适合大规模的分布式存储系统;实现动态备份系统将其应用于已建立的科技信息数据中心．通过实验分析表明,该动态备份机制能提高系统的可靠性。     

QUICK: a tool for graphical user-interface construction by non-programmers

The last decade has placed the superiority of graphical user interfaces over traditional text-based approaches beyond dispute. In almost all contexts, users have found graphical interfaces easier to learn, faster to use, and less error-prone. However, it has been shown that the creation of powerful graphical interfaces takes up to 80% of the time required to develop an application. In our work, we seek to extend the benefits of graphical interaction to the next layer of computer user—the interface designer. Our work in this area is distinguished from other efforts by two important differences. First, while other efforts focus primarily on the design of standard user interfaces, our approach emphasizes the creation of unique and innovative interfaces by supporting, among other things, arbitrary user-designed graphical representations, direct specification of animation, and digitized sound. Second, our goal is to cater to the nonprogrammer. Thus, we address a challenging trade-off: maximizing power and flexibility in an extremely simple environment. We explore the utility of the prototype object-oriented paradigm, a high-level userinterface language, and a direct-manipulation programming environment in this context.     

Experimental Investigation of Epoxy Bonded Polymethylmethacrylate Joints

This paper presents an experimental investigation into various aspects of epoxy-bonded polymethylmethacrylate (PMMA) and PMMA-to-aluminium joints. The effects of adhesive thickness, overlap area, surface roughness, and environmental exposure on the joint strength were studied. Results indicated that the joint strength was not directly proportional to the overlap area, while sanding had a positive effect on the joint strength. A negative effect was observed when adhesive thickness was increased. The fatigue behaviour of adhesively-bonded joints under dynamic loading was found to be independent of frequency, for the range of values tested; however, it was dependent on the test temperature with greater reduction in fatigue life observed in PMMA-to-aluminium joints at higher temperature. Empirical equations from which the fatigue life of joints can be predicted were obtained by regression analysis. Intermittent fatigue testing of the joints was also performed. The epoxy adhesive tested proved to be a satisfactory choice for outdoor exposure. The rate of degradation of the adhesive was slow with the adherend itself degrading at a faster rate than the adhesive or the bondline.