An experimental study on the choked flow characteristics of CO2 pipelines in various phases

High pressure pipeline transportation has been an established technology for economically transporting large amounts of CO_2. However, there are still issues and associated risks that have to be effectively addressed and adequately understood. It is well known that a strong Joule-Thomson Cooling effect can occur when pressurized CO_2 flows through a choke valve. Thus, to investigate the choking characteristics especially the temperature drop of high pressure CO_2, a new laboratory scale experimental setup(total length of 14.85 m and the inner diameter of 15 mm) was constructed. Steady choked flow and transient choked flow tests were carried out respectively for pressurized CO_2 in various initial phases. The phase transitions and temperature drop characteristics were then studied following the choked flow and the results show that the phase transitions in steady choked flow differs significantly from that in transient choked flow. For transient choked flow of various initial phases, all the flows downstream would transfer from single phase to gas–liquid two-phase flow. Furthermore, the effect of water on transient choked flow of supercritical CO_2 pipeline was investigated, and the phenomena of solid particles deposition was captured which was paramount importance of ensuring the safety operation of CO_2 pipelines when throttling by the choke valves.     

State-of-the-art technology: Recent investigations on laser-mediated synthesis of nanocomposites for environmental remediation

In both developing and industrialized/developed countries, various hazardous/toxic environmental pollutants are entering water bodies from organic and inorganic compounds (heavy metals and specifically dyes). The global population is growing whereas the accessibility of clean, potable and safe drinking water is decreasing, leading to world deterioration in human health and limitation of agricultural and/or economic development. Treatment of water/wastewater (mainly industrial water) via catalytic reduction/degradation of environmental pollutants is extremely critical and is a major concern/issue for public health. Light and/or laser ablation induced photocatalytic processes have attracted much attention during recent years for water treatment due to their good (photo)catalytic efficiencies in the reduction/degradation of organic/inorganic pollutants. Pulsed laser ablation (PLA) is a rather novel catalyst fabrication approach for the generation of nanostructures with special morphologies (nanoparticles (NPs), nanocrystals, nanocomposites, nanowires, etc.) and different compositions (metals, alloys, oxides, core-shell, etc.). Laser ablation in liquid (LAL) is generally considered a quickly growing approach for the synthesis and modification of nanomaterials for practical applications in diverse fields. LAL-synthesized nanomaterials have been identified as attractive nanocatalysts or valuable photocatalysts in (photo)catalytic reduction/degradation reactions. In this review, the laser ablation/irradiation strategies based on LAL are systematically described and the applications of LAL synthesized metal/metal oxide nanocatalysts with highly controlled nanostructures in the degradation/reduction of organic/inorganic water pollutants are highlighted along with their degradation/reduction mechanisms.     

Calcined hydrotalcites for the catalytic decomposition of N2O in simulated process streams

Various hydrotalcite based catalysts were prepared for testing for the catalytic decomposition of N₂O. CoAl, NiAl, Co/PdAl, Co/RhAl, and Co/MgAL substituted hydrotalcites and CoLaAl hydroxides offer very good activity at modest temperatures. Precalcination of these materials at ca. 450–500°C, which destroys the hydrotalcite phase, is necessary for optimum activity and life. For Co substituted hydrotalcites, the optimal ratio of Co/Al is 3.0. The temperature for 50% conversion of N₂O of these calcined cobalt hydrotalcites is ca. 75°C lower than for the previous highly active Co-ZSM-5. These calcined cobalt hydrotalcite materials display sustained life at temperatures in excess of 670°C in an O₂ rich, wet stream with high levels of N₂O [10%]. Excess O₂ does not seriously impact N₂O decomposition, but the combination of both water vapor and O₂ does reduce activity by ca. 50%.     

Catalytic decomposition of HCFC22 (CHClF2)

The catalytic decomposition of CHClF₂ was studied over various acidic metal oxides in a fixed-bed reactor. The Cr₂O₃ZrO₂ exhibited the highest activity. The presence of water vapor in the reaction system suppresses the transformation of oxides to fluorides, progresses the formation of CO₂, and it improves the catalysts life.     

Use of Ozonated Water for Disinfecting Gastrointestinal Endoscopes

The reprocessing of endoscopes is a complex procedure due to their structural design. In the constant search for new antimicrobial substances, recent studies with ozone have yielded great benefits. The present study evaluated the effects of ozonated water used to disinfect endoscopes comparing its efficacy with the conventional technique (2% glutaraldehyde). According to the results obtained, when ozonated water was used (330 mg.min.L^?1), induced a 2 log reduction of the viable microorganisms under the conditions tested. Ozonated water was a potent gastrointestinal endoscopic sanitizer, suggesting it is a feasible alternative for disinfection.     

The effect of copper valence on catalytic combustion of styrene over the copper based catalysts in the absence and presence of water vapor☆

Catalysts Cu Ox/γ-Al_2O_3-IH and Cu Ox/γ-Al_2O_3-IM were prepared, characterized, and tested for styrene combustion in the absence and presence of water vapor. The effect of copper valence of the catalysts on the catalytic activity for styrene combustion was discussed using the theory of hard soft acids and bases(HSAB).The results showed that the existence of water vapor in feed stream inhibited the catalytic activity for styrene combustion due to the competition adsorption of water molecule. HSAB theory confirmed that the local soft acidity of the catalyst Cu Ox/γ-Al_2O_3-IH was much stronger than that of the catalyst Cu Ox/γ-Al_2O_3-IM because of the higher content of soft acid Cu+on its surface, which increased the adsorption ability toward soft base of styrene and reduced the adsorption toward hard base of water vapor, and thus increased the catalytic activity for styrene combustion and weakened the negative influence of water vapor.     

Micellar Properties for Propoxylated Surfactants in Water/Alcohol Solvent Mixtures and Their Antibacterial and Polyester Fabric Antistatic Performances

Two propoxylated quaternary amine surfactants characterized by two and six average PO adduct numbers (PO-2 and PO-6 QA surfactants) were synthesized to investigate the micellar properties of propoxylated cationic surfactants in water/alcohol mixtures. The effect of PPO groups on micelle formation was explored using conductivity, UV–vis spectroscopy, dynamic light scattering techniques. Regular or reverse micellization occur with water or alcohol rich solvent mixtures, respectively. For intermediate composition no micellization occurs. Also the performances in antibacterial and antistatic fabrics were studied. PO-2 QA surfactant has excellent antibacterial activities against both the Gram-negative bacterium Escherichia coli and the Gram-positive bacterium Staphylococcus aureus while both surfactants have good antistatic activity over polyester fabric.     

Optimal model-based aeration control policies in a sequencing batch reactor

We present a non-linear programming formulation for the computation of optimal aeration policies in a sequencing batch reactor for wastewater streams treatment. We assume that organic matter and nitrogen are the main pollutants to be removed to meet water quality targets. The novelty of the work lies in the fact that no binary variables are required to compute the switching time between the aerobic and anoxic stages of the water treatment process leading to a simpler, robust and easier to compute optimization formulation. Moreover, because the control valve, through which air is fed to the reactor, can take either its minimum or maximum bounds as well as any fractional values between such bounds, improved optimal aeration profiles are reported. Such improved profiles mean that shorter processing times are required, compared to previous solutions, leading also to a reduction in the operation cost of the wastewater treatment process. Although the optimal operation policies were computed for a typical home wastewater stream, the optimization formulation can also be extended for the treatment of other polluted streams.     

钒电解液在纳米多孔质子膜中的动态迁移规律研究

考察了不同电流密度、不同温度下电解液在纳米多孔质子膜中的迁移情况,在多次充放电循环后,钒离子与水均在负极积累,正极电解液体积线性减小,负极电解液体积线性增大,同时研究了电解液迁移对充放电容量的影响,研究表明,钒离子的跨膜迁移会导致充电与放电瓦时容量在不断衰减。     

An All‐Natural Adhesive for Bonding Wood

A novel adhesive that is solely based on natural materials of defatted soy flour (SF) and magnesium oxide (MgO) has been investigated for preparation of five‐ply plywood panels. The resulting plywood panels met the industrial water‐resistant requirement for interior plywood. In this study, mechanisms by which an aqueous mixture of SF and MgO served as a strong and water‐resistant adhesive for bonding wood were investigated. SF was first fractionated into soy protein isolates (SPI), a water‐soluble fraction, and insoluble carbohydrates (ICs) that were mixed with MgO, respectively, for preparation of maple laminates. The water resistance of the resulting maple laminates was evaluated by a three‐cycle water‐soaking‐and‐drying (WSAD) test and a two‐cycle boiling‐water test (BWT). The mixture of MgO and the soluble fraction was not able to bond maple veneers together. The shear strengths of the resulting maple laminates before and after WSAD and BWT all had the following order: MgO–SPI > MgO–SF > SF only > MgO–IC. The water solubility of SF in the heat‐cured SF–MgO mixture was much lower than that of the heat‐cured SF. We believe that the low water solubility of SF–MgO and close interactions between MgO and soy proteins instead of soy carbohydrates were responsible for the superior strengths and high water resistance of the soy‐MgO adhesive.