面向大规模金融对账文件的近似比对模型及系统

针对TB级的大规模金融对账文件的近似比对问题,本文深入分析了金融对账文件的特点,以提升比对速度作为研究目标,提出了一种多层次的近似比对模型-UpCompare模型.UpCompare模型以多进程为扩展基础,采用哈希索引建立映射表结合快速致胜策略为核心算法.测试结果表明,运用UpCompare模型,我国银行卡清算系统的每日清算文件近似比对效率提升了5倍以上.     

Avalon总线的音频编解码控制器IP核设计

介绍了基于Avalon总线的WM8731音频编解码控制器IP核的设计,包括音频数据访问接口模块和Avalon-MM接口模块等,并利用SOPC技术将其封装成可重用的IP核.自定义IP核的使用,有效降低了该芯片的开发难度,同时也使系统易于扩展和升级,具有较高的灵活性.在Quartus Ⅱ和ModelSim下使用VHDL语言完成了控制器的设计、仿真以及Nios Ⅱ系统的构建,并通过SignalTap Ⅱ逻辑分析仪进行了硬件测试.仿真和测试结果表明,该控制器满足WM8731各项时序要求.     

Linux下Ext2文件系统的精剪与优化设计

基于Linux系统通过精细剪裁和优化设计,构建开发了一个Linux多级用户的Ext2二级文件系统,以作GPS等专业嵌入式的文件系统.其系统包括各基本实体(索引节点 、目录节点 、文件节点等)的定义和各功能模块的定义及实现,最后展示了系统部分功能模块的测试数据.本文所构造的Linux文件系统已经过测试并取得了良好效果.     

DirectShow技术的应用研究与开发

研究了采用DirectShow技术从音视频设备获取媒体数据并进行后期处理的问题. 随着多媒体技术应用的越来越广, 用户对多媒体产品的要求也越来越高. 早期的多媒体软件与音视频设备高度关联, 存在着通用性差、功能扩展难等诸多局限, 不能满足用户需求. 本文基于DirectShow系统对硬件的充分支持以及硬件设备无关性的特点, 提出了一种采用DirectShow技术的设计方法, 解决了多媒体软件受限于设备的问题. 经测试表明, 该方法达到了预期, 在多媒体领域将有良好的应用前景.     

一种机载火控系统自动测试平台的设计及实现

针对一般典型机载火控系统的测试需求,提出了一种基于PXI总线和ini配置文件的自动测试平台的设计及实现方法。用户可以在该自动测试平台上"零编程"搭建自动测试系统。     

一种改进的DCT域数字音频水印算法

针对现有数字音频水印算法不能同时满足隐蔽性与鲁棒性的问题,在添加水印之前,先将水印的二值图像与随机密钥进行加密操作,再对载体进行三级小波变化和DCT变换,最后对比加密后的水印信息与载体信号,得到密钥值,并将密钥嵌入到载体音频的DCT中频系数中。实验结果表明,该算法能在隐蔽性和鲁棒性之间达到一个较好的平衡。     

S-states of helium-like ions

A simple Mathematica (version 7) code for computing S-state energies and wave functions of two-electron (helium-like) ions is presented. The elegant technique derived from the classical papers of Pekeris (1958, 1959, 1962, 1965, 1971) [1], [2] and [3] is applied. The basis functions are composed of the Laguerre functions. The method is based on the perimetric coordinates and specific properties of the Laguerre polynomials. Direct solution of the generalized eigenvalues and eigenvectors problem is used, distinct from the Pekeris works. No special subroutines were used, only built-in objects supported by Mathematica. The accuracy of the results and computation times depend on the basis size. The ground state and the lowest triplet state energies can be computed with a precision of 12 and 14 significant figures, respectively. The accuracy of the higher excited states calculations is slightly worse. The resultant wave functions have a simple analytical form, that enables calculation of expectation values for arbitrary physical operators without any difficulties. Only three natural parameters are required in the input.The above Mathematica code is simpler than the earlier version (Liverts and Barnea, 2010 [4]). At the same time, it is faster and more accurate.

Program summary

Program title: TwoElAtomSL(SH)Catalogue identifier: AEHY_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEHY_v1_0.htmlProgram obtainable from: CPC Program Library, Queen?s University, Belfast, N. IrelandLicensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.: 11 434No. of bytes in distributed program, including test data, etc.: 540 063Distribution format: tar.gzProgramming language: Mathematica 7.0Computer: Any PCOperating system: Any which supports Mathematica; tested under Microsoft Windows XP and Linux SUSE 11.0RAM:?¹⁰⁹ bytesClassification: 2.1, 2.2, 2.7, 2.9Nature of problem: The Schrödinger equation for atoms (ions) with more than one electron has not been solved analytically. Approximate methods must be applied in order to obtain the wave functions or another physical attributes from quantum mechanical calculations.Solution method: The S-wave function is expanded into a triple set of basis functions which are composed of the exponentials combined with the Laguerre polynomials in the perimetric coordinates. Using specific properties of the Laguerre polynomials, solution of the two-electron Schrödinger equation reduces to solving the generalized eigenvalues and eigenvector problem for the proper Hamiltonian. The unknown exponential parameter is determined by means of minimization of the corresponding eigenvalue (energy).Restrictions: First, the too large length of expansion (basis size) takes the too large computation time and operative memory giving no perceptible improvement in accuracy. Second, the number of shells Ω in the wave function expansion enables one to calculate the excited nS-states up to n=Ω+1 inclusive.Running time: 2–60 minutes (depends on basis size and computer speed).     

基于UniSPeech-SDA80D51的车载音响声控系统

提出一种语音命令控制车载音响操作的设计方案,以德国Infineon公司新推出的具有DSP和单片机双核的SoC语音处理芯片UniSpeech-SDA80D51为核心组成非特定人车载音响语音控制系统,并实现了系统样机的研制.该系统在江淮同悦SL1102C1型车载音响上进行了语音控制实测,实测数据表明系统语音识别率可达到95...     

基于SoPC的SD卡控制器IP核的设计

针对目前在嵌入式平台中使用SD卡控制器专用芯片价格昂贵、软件模拟SPI时序控制读写速度较慢的问题,提出了一种基于SoPC技术的SD卡控制器IP核设计的架构方案.采用VHDL语言设计SD卡控制器IP核,利用自定义模块技术将其添加到SoPC中,利用Nios Ⅱ IDE编写SD卡的基础读写驱动软件并移植μC/FS文件系统,实...     

基于原子构件的站点计数设计

站点计数是Web应用程序中一个最基本的功能,通过计数数据可以得知网站的受欢迎程度。构件是通过类代码来实现,设计的基本思路是：从存储站点计数数据的文件中读取数据,计数值增1,然后将数据写于文件。实际应用中,只要在需要计数的页面中加入一段代码就可以实现计数。