Phenol novolac/poly(4- hydroxyphenylmaleimide) blend hardeners for DGEBA-type epoxy resin

Phenol novolac/poly (4-hydroxyphenylmaleimide) (PHPMI) blends were used as an epoxy resin hardener. The curing behavior of the above system and the thermal and mechanical properties of the cured epoxy resin were studied. It was not necessary to use a curing accelerator for this system, because PHPMI caused acceleration of the curing reaction. The curing mechanism of this system was investigated by using model compounds. Test pieces from the neat resins and the glass fiber reinforced resins were evaluated in terms of thermal and mechanical properties, respectively. It was found that heat resistance and mechanical properties were improved by increasing the amount of PHPMI in the hardener.     

分散剂FDN对G级油井水泥作用机理探讨

采用液相电导法和酸度法研究了分散剂FDN对G级油井水泥水化速度的影响。发现FDN促进水泥的早期水化,但吸附-络合作用及磺酸根离子对Ca(OH)_2核晶过程的“毒化”作用使后期水化速度减慢。本研究证实ζ电位升高是FDN广生分散作用的主要因素。当FDN的吸附达饱和时,ζ电位达最大值,水泥浆的分散程度最大。     

流动微量量热法研究阴离子表面活性剂在油砂表面的吸附

用流动微量量热法研究了十二烷基硫酸钠(SDDS)和十二碳羧酸钠(SL)在克拉玛依油田九区和乌尔禾区油砂上的吸附,简要地计论了吸附机理。所得实验结果表明,SL 在油砂上的吸附强度比 SDDS 的要大,在相当低的浓度下即可迟到饱和吸附。     

水溶液辐射分解产物对金属材料腐蚀的影响

实验研究了水辐射分解作用对高放废物深地质处置容器材料的影响。在高放废物深地质处置库附近的地下水,受辐射线作用后分解出氧、氢和氧化产物(例如H_2O_2等),于是在高放废物容器周围形成一个氧化场,导致高放废物中的某些重要放射性核素(例如U,Np和Tc)易溶于水,并向远域迁移。本实验中的含FeSO_4(0.13 mol/L)水溶液在吸收剂量为0、20、60、180、500kGy的射线作用下,其氧化还原电位(Eh)值由+357mV增至+414 mV;在不同吸收剂量的射线作用下,金属Cu、金属Al、0.357 mv金属Fe和不锈钢(后者是我国拟采用的高放废物包装容器材料),在水溶液中的氧化侵蚀强度,分别比在无辐射情况下的大0.2-6.1倍。     

^17O系统的R矩阵分析

采用多道多能级R矩阵理论,全面系统地分析~(17)O系统中10.5 MeV激发能以下有关~(16)O(n,n)~(16)O·~(16)O(n,a)~(13)C和~(13)C(a,a)~(13)C的全部实验数据。有关~(16)O的中子反应截面计算值被收入中国评价数据库CENDL-2和美国的评价数据库ENDF/B-6。对在R矩阵分析中如何确定本底、道半径和边界条件等问题予以讨论。     

Modified Imidazoles: Degradation Inhibitors and Adhesion Promoters for Polyimide Films on Copper Substrates

Polyimide films on copper substrates that are exposed to elevated temperatures and an oxidizing environment will be subject to degradation. In order to halt this degradation without changing the properties of the system, a polymeric agent could be placed between the polyimide and the copper. This paper will investigate three such materials that will not only slow down the degradation of the polyimide and the oxidation of the copper, but will also improve adhesion within the system. Fourier transform infrared reflection-absorption spectroscopy (FTIR-RAS) will be used to investigate the polyimide/polymeric agent/copper system.     

In-situ monitoring and control for MOCVD growth of AlGaAs and InGaAs

We have used spectroscopic ellipsometry to perform real-time monitoring during metalorganic chemical vapor deposition growth of AlGaAs (on GaAs) and InGaAs (on GaAs and InP). Optical constants for these materials were obtained up to growth temperatures of 600 to 700°C. This information permits real-time extraction of composition and layer thickness from the raw ellipsometric data at sample rates on the order of 0.5 Hz. We describe closed-loop control of composition and total layer thickness on AlGaAs-based structures, including Bragg reflectors. In-situ data obtained on double-heterostructure quantum-well laser structures demonstrate that spectroscopic ellipsometry is an extremely powerful monitoring and quality-control tool, giving important real-time information on complex structures that would be difficult and time-consuming to obtain after growth.     

外焊缝自动跟踪系统

介绍了外焊缝自动跟踪系统的组成及工作原理，简述了传动部分ＧＴＲ－ＰＷＭ调速系统，给出了系统的硬件电路。该跟踪器具有结构简单，体积小，性能稳定等特点，在生产线上获得了成功的应用。