基于前缀广义链表的快速关联规则挖掘算法

挖掘关联规别是数据挖掘研究的一个重要方面，而如何快速有效地挖掘出关联规则是当前研究的热点．本文提出了一种前缀广义链表，并应用此结构进行关联规则的挖掘，得到了一种快速的关联规则发现算法、该算法不仅方便、效率高，而且避免了产生组合爆炸问题．     

一种基于二叉树的Cache一致性目录方法

本文提出了一种高度并发的Ｃａｃｈｅ一致性方法，着重描述了它的并发性，并且通过和ＩＥＥＥＳＣＩ协议的性能比较，表明这种Ｃａｃｈｅ一致性方法具有较好的伸缩能力，适于Ｓ２ＭＰ结构。     

Dye linked conjugated homopolymers: using conjugated polymer electroluminescence to optically pump porphyrin-dye emission

Zinc-porphyrin dye molecules were incorporated into the backbone of a conjugated polymer material by a method, which allowed for the incorporation of only one zinc-porphyrin dye molecule into the backbone of each conjugated polymer molecule. The electronic properties of the homopolymer were established using ultraviolet photoelectron spectroscopy (UPS) for the determination of the electronic energy levels and the injection barrier for holes into the valence band. Pulse radiolysis time resolved microwave conductivity (PR-TRMC) was used to determine the sum of charge carrier mobilities. Electroluminescent devices of the homopolymer itself and of the zinc-porphyrin containing polymer were prepared and the nature of the electroluminescence was characterized. The homopolymer segments were found to optically pump the emission of the zinc-porphyrin dye moities. The homopolymer exhibits blue-green emission and the zinc-porphyrin linked homopolymers emit near-infrared/infrared light. This was demonstrated to be due to electroluminescence pumping of the zinc-porphyrin moieties that were covalently linked to homopolymer material. When only one zinc-porphyrin dye was incorporated into the backbone of each homopolymer molecule complete suppression of homopolymer electroluminescence was observed with exclusive near-infrared emission.     

交联聚合物溶液蠕变回复效应及对驱油效率影响

进行了交联聚合物溶液在多孔介质中的流动试验,观察到交联聚合物溶液的蠕变回复现象,说明交联聚合物溶液在多孔介质中产生了粘弹效应.通过交联聚合物溶液变流速(67,161,67 cm/d)与恒速(67 cm/d)驱油时,即存在蠕变回复效应和无蠕变回复效应驱油,考察交联聚合物溶液蠕变回复效应对驱油效率的影响,结果表明,在本实验条件下,蠕变回复效应能增加原油采收率1.5%.     

Validation of a Method for Quantitation of Soybean Lectin in Commercial Varieties

Soybean agglutinin (SBA) protein, also known as soybean lectin, is regarded as an anti‐nutrient due to its negative effect on the ability of monogastric animals to gain weight following consumption of raw soybean seed. Historically, SBA has been measured using a time‐consuming and cumbersome hemagglutination procedure. The objective of our research was to obtain a validated methodology that is precise and accurate in the measurement of SBA while allowing minimally equipped laboratories to effectively conduct the analysis, thus our focus was on evaluating an existing commercially available ELISA, an enzyme‐linked‐lectin‐assay (ELLA), and a hybrid ELISA/ELLA. A new ELLA technique that can detect and quantify lectins was chosen and modified specifically for the quantitation of SBA in soybean seed. The proposed ELLA methodology is similar to a standard sandwich ELISA, and uses polyacrylamide‐linked N‐acetylgalactosamine (Gal–NAc–PAA) for a capture phase and the biotinylated version (Gal–NAc–PAA–Biotin) for detection. Based upon the validation data, the ELLA method can precisely and accurately determine soybean lectin levels in soybean seed. The validated ELLA method was used to quantify SBA in nine commercial soybean varieties introduced between 1972 and 2008 and demonstrated that the natural variability of SBA is subject to the effects of genotype and environment.     

双向可逆形状记忆乙烯⁃醋酸乙烯酯共聚物的制备和性能研究

以乙烯⁃醋酸乙烯酯共聚物（EVA）为原料,过氧化2⁃乙基己基叔丁酯（TBPE）为交联剂,合成了交联EVA双向形状记忆聚合物（SMP）,并且考察了TBPE含量对于交联EVA性能的影响。结果表明,交联EVA的T_m和T_c随着TBPE含量的上升呈现下降的趋势,可以通过交联剂比例调节材料的驱动温度;交联EVA的形状固定率会随着TBPE含量的增加呈现下降趋势,最低达到88.83 %,而样品的形状恢复率均超过99 %,并且都具有单向和双向形状记忆功能;交联EVA也具有双向记忆性能,R_a,_2W随着TBEC的含量增大而减小,R_r,_2W则相反;因此,通过改变交联剂EVA的量,对于双向交联EVA的性能有较大影响。     

钛交联蒙脱石制备条件的研究

以鄂东钙基蒙脱石提纯、钠化后（d001=1．28nm）为基质原料,用钛酸正丁酯[Ti（n-C4H9O）4]为钛源,采用溶胶-凝胶法制备了一系列钛交联蒙脱石纳米复合材料（Ti—PILCs）;并对水／丙酮比、Ti/土比、交联反应时间、不同溶剂等制备条件进行了分析,试验条件下,可获得d001值达3．74nm的大孔结构Ti—PILCs高纯蒙脱石复合材料。     

连通容器内气体爆炸过程的数值分析

为了研究连通容器内气体爆炸强度增加产生机理以及燃烧火焰与压力传播的基本规律,采用k-ε模型和EBU-Arrhen ius混合反应模型,从流体力学和化学反应动力学守恒方程出发,利用大型流体动力学软件F luent 6.1对连通容器内气体爆炸过程进行了数值分析,获得了气体爆炸过程中火焰和压力传播特性以及气体流动特性,模拟结果能够比较清晰地反映气体爆炸的整个过程。研究表明连通容器中气体爆炸过程中火焰始终是加速传播的,气体压缩和反流以及喷射火焰是连通容器气体爆炸强度增加的主要原因。