基于交通信息和配电网全成本电价的电动汽车充电负荷调度方法

电动汽车的集中充电行为会在一定程度造成交通拥堵,为解决这一问题,综合考虑交通信息和电网信息,基于边际定价理论得到配电网节点边际电价和交通阻塞成本,构建电动汽车充电的全成本电价模型。在此基础上,提出一种考虑交通信息和配电网全成本电价的电动汽车充电负荷调度方法。通过仿真算例验证,该方法在满足电动汽车充电需求的同时可以有效缓解交通拥堵。     

车联网基于信任度的RSU识别及资源分配算法

在车联网中,由于部分路侧单元（RSU）的位置比较偏远,无法得到网络管理员的及时维护,可能遭到攻击,变为不可信任的路侧单元,降低了车辆的通信质量和网络能效.为了有效地识别RSU的可靠性,提出了一种基于信任度的路侧单元识别及资源分配算法,将路侧单元识别、传输模式的选择和功率分配联合建模为网络能效的优化问题,并分成3个子优化问题,分别求解.首先,采用基于信任度的RSU识别算法,识别出可信任和不可信任的路侧单元;其次,优化车辆资源块配置和链路选择;最后,通过次梯度算法优化传输功率,最大化网络能效.理论分析和仿真结果表明,所提算法具备较低的复杂度,可以达到较高的路侧单元识别准确度,并有效地提升网络总能效.     

基于改进YOLOv3的运动目标分类检测算法研究

提出一种基于改进YOLOv3算法的一类运动目标检测算法. 为进一步提高YOLOv3的检测精度,采用基于DIoU优化的边界框回归损失函数进行计算; 优化非极大值抑制,有效减少了目标框重叠的现象,提高检测精度; 针对运动目标检测,提出一种基于目标框多中心点位移的检测算法. 经UA-DETRAC数据集上的实验表明,改进后的算法在提高检测精度的同时保证了较快的速度,准确率和召回率相比原始YOLOv3分别提高了 8.07%和3.87%,对运动目标的检测速度可达20 fps/s,可满足实时检测的要求.     

WiNoC中基于Edge first算法的流量平衡设计

在无线片上网络中,无线节点拥塞以及不同子网和全局网络内的流量平衡情况对整个片上网络的通信效率有着重要的影响,为此提出了基于Edge first算法的全局流量平衡机制（GTB）。首先优化了划分有线无线数据包的机制,减少了无线节点处的拥塞;其次根据无线路由器（WR）的拥塞情况,提出Edge first路由算法平衡子网内的流量;最后在全局网络中提出了全局子网拥塞感知（GSCA）判断机制,使得长距离数据包优先从低拥塞子网通过,平衡了全局网络的流量。实验表明,该方案在可接受的硬件开销、功耗开销下,保证较低的网络延迟和较高的网络吞吐率,并且大幅的提升了网络的流量平衡性能。     

Microstructural evolution and interfacial reactions between Ti and ZrO2/CaTiO3 composites

Various proportions of ZrO₂/CaTiO₃ powders were mixed and hot pressed at 1500°C/30 min for Ti casting. The hot-pressed ZrO₂/CaTiO₃ composites were reacted with pure Ti at 1700°C/10 min in Ar. The interfacial reaction between Ti and ZrO₂/CaTiO₃ composites was investigated through X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and energy-dispersive X-ray spectroscopy. The ZrO₂/CaTiO₃ composites with less than 10 vol.%, CaTiO₃, and a minor amount of residual TiO₂ were found. When the content of ZrO₂ was increased to larger than 10 vol.%, two Ca₂Zr₅Ti₂O₁₆ and CaZrTi₂O₇ phases appeared in the composites. The amount of CaTiO₃ and CaZrTi₂O₇ in the composites gradually decreased as the amount of ZrO₂ increased. When Ti came in contact with ZrO₂/CaTiO₃ composites with less than 10 vol.% ZrO₂, the resulting eutectic reaction produced a liquid phase and induced melting. When ZrO₂ was increased to more than 30 vol.% in the composites, Ca₂Zr₅Ti₂O₁₆ and CaZrTi₂O₇ changed completely to CaZrO₃, Ti₂O, CaO, and ZrO₂. With more than 30 vol.% ZrO₂, no other reaction phases occurred in the Ti side after contact with the ZrO₂/CaTiO₃ composites, which is conducive for producing ceramic composites for Ti casting applications.     

面向对象的液压与气压回路工作原理仿真软件开发

详细介绍了用于液压与气压传动课程教学的“面向对象的液压与气压回路工作原理仿真软件”的开发，该软件采用VB6．0、AutoCAD及Microsoft Visio在Win2000操作系统上开发而成，采用了面向对象的建模技术，实现了液压与气压原理图的自动识别及工作原理仿真。     

Formation of an amorphous phase in thermally sprayed WC-Co

A WC-Co coating was sprayed by the high-velocity oxyfuel process using a feedstock of tungsten carbide clad with cobalt. The structure of the sprayed coating was characterized by x-ray diffraction (XRD), differential scanning calorimetry (DSC), and differential thermal analysis (DTA). It was found that an amorphous phase of Co-W-C ternary alloy observed as a large, broad peak in the XRD pattern can be formed in the as-sprayed WC-Co coating. The DSC, DTA, and XRD analyses revealed that the amorphous phase crystallized at a temperature of around 873 K to metallic cobalt, Co₆W₆C, and tungsten with appreciable precipitation of free carbon. The heat treatment of as-sprayed WC-Co coating at a high temperature of 1173 K suggests that annealing at a temperature higher than about 1104 K will promote the reaction of tungsten and cobalt with carbon to form the complex carbide C₀₆W₆C.     

New inverse method for identification of constitutive parameters

A new inverse method by coupling iSIGHT and ABAQUS was proposed to determine the constitutive parameters of Al2O3sf/LY12 composite deforming at elevated temperature. It combined the merits of the f＇mite element simulation and optimization technique. The direct model was simulated with finite element code ABAQUS. The inverse problem associated with the identification of the constitutive parameters was expressed as a least square optimization problem. The direct simulation and the parameters optimization were implemented in iSIGHT integrated environment. The aim was to match the output of the direct simulation with the experiment data. The capability of the proposed inverse method was demonstrated through the identification of constitutive parameters of Al2O3sf/LY12 composite. The proposed new inverse method is also applicable to other parameters identification which is hardly determined through experiments or direct analytical method.     

基于LM算法的宽板V型自由弯曲参数的实时识别

在弯曲成形智能化控制过程的4个要素中，材料性能参数的实时识别占有极其重要的地位。为提高实时识别的精度和效率，根据宽板V型自由弯曲成形的特点，建立了宽板V型自由弯曲成形智能化控制过程材料性能参数实时识别的LM神经网络模型。训练结果表明，与改进的BP网络模型比较，LM网络模型的收敛精度和收敛速度均有明显的提高，为实现弯曲成形过程的智能化控制奠定了基础。     

呋喃树脂砂型球铁铸件异常组织分析

采用呋喃树脂砂型铸造球铁件时，由于树脂和硬化剂分解产生的C,S渗入铁液使铸件表层局部区域形成大量密集的细片状和点状过冷石墨，这些区域加工表面上呈灰暗色。在容易产生这种缺陷的部位设置冷铁．使该部位不与树脂砂接触，因而能避免上述缺陷产生。