包装件压力试验机计算机测控系统

针对YE-50包装件压力试验机落后的测控系统，提出一种基于压力和位移闭环控制的计算机测控系统。根据测得的压力、位移和设定值，通过模糊控制输出驱动伺服阀实现了压力试验时的恒速控制和堆码试验时的恒力控制。并实时显示力——位移及应力——应变曲线。文中还对模糊控制器的实验整定方法进行了探讨。     

实时Motion JPEG2000视频编码系统设计

介绍了基于ADV202 JPEG2000编码芯片的Motion JPEG2000视频编码系统,该系统可实现SMPTE274M的实时编码,支持失真/无失真编码,与标准完全兼容.给出了系统硬件结构和软件流程设计,提出了一种利用帧间相关性减少编码计算量的码率控制方法.     

单片机控制下液晶显示器的使用

介绍液晶显示器EDM12864B的原理及其在单片机控制下的简单应用。     

混合动力电动汽车用电机及驱动控制器的电磁兼容设计

电机及驱动控制器作为电动汽车的关键部件,其电磁兼容设计对于保证电动汽车的可靠运行非常重要.介绍了国家十五项目中某混合动力轿车用电机及控制器系统的电磁兼容措施,分别从控制电路、信号电缆、功率电路及屏蔽机箱等工程角度进行了分析和设计.该系统的电磁兼容性符合GB/T17619-1998的要求,且已应用于实际混合动力电动汽车,运行情况良好.     

采用RF2607的WLAN自动增益控制设计

介绍了宽动态变化范围的新型可变增益放大器RF2607的特性、功能,给出了利用RF2607设计无线局域网(WLAN)通信中自动增益控制部分的实用电路.     

一种基于混沌同步的噪音衰减算法

论文提出了一种混沌通信系统的噪音衰减算法,该算法利用混沌同步现象在接收端获得正确的噪音估计值,从而从接收信号中滤除噪音恢复出正确的信号。通过数值仿真试验表明该方法是可行的。     

A call admission and rate control scheme for multimedia support over IEEE 802.11 wireless LANs

Quality of service (QoS) support for multimedia services in the IEEE 802.11 wireless LAN is an important issue for such WLANs to become a viable wireless access to the Internet. In this paper, we endeavor to propose a practical scheme to achieve this goal without changing the channel access mechanism. To this end, a novel call admission and rate control (CARC) scheme is proposed. The key idea of this scheme is to regulate the arriving traffic of the WLAN such that the network can work at an optimal point. We first show that the channel busyness ratio is a good indicator of the network status in the sense that it is easy to obtain and can accurately and timely represent channel utilization. Then we propose two algorithms based on the channel busyness ratio. The call admission control algorithm is used to regulate the admission of real-time or streaming traffic and the rate control algorithm to control the transmission rate of best effort traffic. As a result, the real-time or streaming traffic is supported with statistical QoS guarantees and the best effort traffic can fully utilize the residual channel capacity left by the real-time and streaming traffic. In addition, the rate control algorithm itself provides a solution that could be used above the media access mechanism to approach the maximal theoretical channel utilization. A comprehensive simulation study in ns-2 has verified the performance of our proposed CARC scheme, showing that the original 802.11 DCF protocol can statically support strict QoS requirements, such as those required by voice over IP or streaming video, and at the same time, achieve a high channel utilization. Hongqiang Zhai received the B.E. and M.E. degrees in electrical engineering from Tsinghua University, Beijing, China, in July 1999 and January 2002 respectively. He worked as a research intern in Bell Labs Research China from June 2001 to December 2001, and in Microsoft Research Asia from January 2002 to July 2002. Currently he is pursuing the PhD degree in the Department of Electrical and Computer Engineering, University of Florida. He is a student member of IEEE. Xiang Chen received the B.E. and M.E. degrees in electrical engineering from Shanghai Jiao Tong University, Shanghai, China, in 1997 and 2000, respectively, and the Ph.D. degree in electrical and computer engineering from the University of Florida, Gainesville, in 2005. He is currently a Senior Research Engineer at Motorola Labs, Arlington Heights, IL. His research interests include resource management, medium access control, and quality of service (QoS) in wireless networks. He is a Member of Tau Beta Pi and a student member of IEEE. Yuguang Fang received a Ph.D degree in Systems and Control Engineering from Case Western Reserve University in January 1994, and a Ph.D degree in Electrical Engineering from Boston University in May 1997. From June 1997 to July 1998, he was a Visiting Assistant Professor in Department of Electrical Engineering at the University of Texas at Dallas. From July 1998 to May 2000, he was an Assistant Professor in the Department of Electrical and Computer Engineering at New Jersey Institute of Technology. In May 2000, he joined the Department of Electrical and Computer Engineering at University of Florida where he got the early promotion with tenure in August 2003 and has been an Associate Professor since then. He has published over one hundred (100) papers in refereed professional journals and conferences. He received the National Science Foundation Faculty Early Career Award in 2001 and the Office of Naval Research Young Investigator Award in 2002. He is currently serving as an Editor for many journals including IEEE Transactions on Communications, IEEE Transactions on Wireless Communications, IEEE Transactions on Mobile Computing, and ACM Wireless Networks. He is also actively participating in conference organization such as the Program Vice-Chair for IEEE INFOCOM’2005, Program Co-Chair for the Global Internet and Next Generation Networks Symposium in IEEE Globecom’2004 and the Program Vice Chair for 2000 IEEE Wireless Communications and Networking Conference (WCNC’2000).     

Impulsive Noise Suppression from Highly Distorted Images with Triangular Interpolants

In this paper a new filter, Triangular Interpolant Based Impulsive Noise Suppression Filter (SF), is proposed to restore images corrupted by fixed valued impulsive noise (IN). The proposed filter comprises two main stages: detection of noise and restoration of corrupted pixels. The SF achieves the restoration of the detected noisy pixels by using one of the Triangular Interpolant techniques and leaves the other pixels unaltered. Simulation results reveal that the proposed filter shows better performance than the highly approved IN suppression filters across a wide noise density ranging from 10% to 90%. The proposed filter also perfectly achieves the robustness anddetail preservation with reduced computational complexity.     

IGCT 综合型电荷控制 模型的建立和仿真

以电荷控制方程而建立的IGCT综合型电荷控制模型，经关键性的关断电流和关断电压进行了仿真分析，所得结果与实际结果吻合。因此该模型是有效的，可用于IGCT的开关特性分析和集成门极电路设计。     

5Gb/s 0.25μm CMOS限幅放大器

采用TSMC 0.25μm CMOS技术设计实现了高速低功耗光纤通信用限幅放大器.该放大器采用有源电感负载技术和放大器直接耦合技术以提高增益,拓展带宽,降低功耗并保持了良好的噪声性能.电路采用3.3V单电源供电,电路增益可达50dB,输入动态范围小于5mVpp,最高工作速率可达7Gb/s,均方根抖动小于0.03UI.此外核心电路功耗小于40mW,芯片面积仅为0.70mm×0.70mm.可满足2.5,3.125和5Gb/s三个速率级的光纤通信系统的要求.