Spectral color reproduction minimizing spectral and perceptual color differences

In this article, we are combining minimization criteria in the colorant separation process for spectral color reproduction. The colorant separation is performed by inverting a spectral printer model: the spectral Yule‐Nielsen modified Neugebauer model. The inversion of the spectral printer model is an optimization operation in which a criterion is minimized at each iteration. The approach we proposed minimizes a criterion defined by the weighted sum of a spectral difference and a perceptual color difference. The weights can be tuned with a parameter α ∞ [0, 1]. Our goal is to decrease the spectral difference between the original data and its reproduction and also to consider perceptual color difference under different illuminant conditions. In order to find the best α value, we initially compare a pure colorimetric criterion and a pure spectral criterion for the reproduction, then we combine them. We perform four colorant separations: the first separation will minimize the 1976 CIELAB color difference where four illuminants are tested, the second separation will minimize an equally weighted summation of 1976 CIELAB color difference with the four illuminants tested independently, the third colorant separation will minimize a spectral difference, and the fourth colorant separation will combine a weighted sum of a spectral difference and one of the two first colorimetric differences previously introduced. This last colorant separation can be tuned with a parameter in order to emphasize on spectral or colorimetric difference. We use a six colorants printer with artificial inks for our experiments. The prints are simulated by the spectral Yule‐Nielsen modified Neugebauer model. Two groups of data are used for our experiments. The first group describes the data printed by our printing system, which is represented by a regular grid in colorant space of the printer and the second group describes the data which is not originally produced by our printing system but mapped to the spectral printer gamut. The Esser test chart and the Macbeth Color Checker test chart have been selected for the second group. Spectral gamut mapping of this data is carried out before performing colorant separation. Our results show improvement for the colorant separations combining a sum of 1976 CIELAB color difference for a set of illuminants and for the colorant separation combining a sum of 1976 CIELAB color difference and spectral difference, especially in the case of spectral data originally produced by the printer. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 494–504, 2008     

Perceptual evaluation of color gamut mapping algorithms

The recommendation of the CIE has been followed as closely as possible to evaluate the accuracy of five color gamut mapping algorithms (GMAs)—two nonspatial and three spatial algorithms—by psychophysical experiments with 20 test images, 20 observers, one test done on paper and a second one on display. Even though the results do not show any overall “winner,” one GMA is definitely perceived as not accurate. The importance of a high number of test images to obtain robust evaluation is underlined by the high variability of the results depending on the test images. Significant correlations between the percentage of out‐of‐gamut pixels, the number of distinguishable pairs of GMAs, and the perceived difficulty to distinguish them have been found. The type of observers is also important. The experts, who prefer a spatial GMA, show a stronger consensus and look especially for a good rendering of details, whereas the nonexperts hardly make a difference between the GMAs. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 470–476, 2008     

In Search of the "Ideal" Pear (pyrus spp.): Results of a Multidisciplinary Exploration

Preference mapping with 10 pears identified 3 segments among New Zealand consumers. While 1 segment preferred ripe European cultivars, another rejected only the seedling with strong off‐flavors. A 3rd segment combined the 2 former segments, but also rejected 2 hybrid samples. Survey responses to the question “To me, the ideal pear is ?” from a 2nd consumer sample confirmed the general preference for juicy and sweet pears, the key characteristics of ripeness. A separate appearance evaluation revealed 4 segments based on color and shape. Combining information from several sources resulted in suggestions for new breeding directions for pears, while highlighting the importance of appearance and the need for more extensive measurements.     

Mapping the Characteristics of a 'Good' Play Therapist.

In this pilot study, concept mapping, a methodological approach combining qualitative and quantitative analytic strategies, was used to identify the therapist qualities, competencies, and skills necessary for effective play therapy outcomes as perceived by a sub-sample of 28 experienced play therapists who are members of the Association for Play Therapy (APT). The clusters associated with the therapeutic relationship and facilitative skills (e.g., empathy, warmth, and genuineness) were rated as the most essential skills to possess and also as the most difficult to develop. In contrast, the clusters associated with play therapy interventions and theories were rated as the least important skills to possess but as the easiest to acquire. The findings are discussed, with implications for therapeutic practice, research, and policy. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Monitoring water quality in reservoirs with IRS-1A-LISS-I

An attempt has been made to quantify the relationship between the variation in IRS-IA-LISS-I (Indian Remote Sensing Satellite-1A Linear Imaging Self-Scanning System) radiance data and field measured change in secchi disc depth. Secchi disc depth was measured for 47 predetermined sampling locations on reservoir surface water. At extinction depth (secchi depth), water samples were collected from all the sampling locations. Suspended sediments of eight locations representing various reaches of the reservoir were selected for mineralogical, particle size and optical properties analysis. The LISS-I radiance value in band 1 (0.45–0.52µm) band 2 (0-52–0.59 µm) and band 3 (0.62–0.68 µm) were used in a regression analysis. The absorption infrared band 4 (0.77–0.86 µm) was not included in the analysis. In these, the dependable variable was secchi depth (SD) and the LISS-I-radiance data was the estimator variable. Forty-seven data sets of 20 October 1988 from Tawa reservoir surface water were used to obtain an estimator equation for SD. The verification of the estimator equation was tested by applying it to a data set of 21 measurements of 28 September 1988 for this reservoir. The coefficient of correlation between observed and estimated values for the 28 September 1988 data set wasr=0.92 for SD, indicating that the equation could accurately predict the water clarity (SD) for this reservoir on new occasions from IRS-IA-LISS-I spectral data. It is shown that mineral composition and optical properties of suspended sediments influence the reflected radiance of water quality. It is concluded that IRS-IA-LISS-I data provide a useful means of mapping water quality in reservoir.     

Improved wetland remote sensing in Yellowstone National Park using classification trees to combine TM imagery and ancillary environmental data

The U.S. Fish and Wildlife Service uses the term palustrine wetland to describe vegetated wetlands traditionally identified as marsh, bog, fen, swamp, or wet meadow. Landsat TM imagery was combined with image texture and ancillary environmental data to model probabilities of palustrine wetland occurrence in Yellowstone National Park using classification trees. Model training and test locations were identified from National Wetlands Inventory maps, and classification trees were built for seven years spanning a range of annual precipitation. At a coarse level, palustrine wetland was separated from upland. At a finer level, five palustrine wetland types were discriminated: aquatic bed (PAB), emergent (PEM), forested (PFO), scrub-shrub (PSS), and unconsolidated shore (PUS). TM-derived variables alone were relatively accurate at separating wetland from upland, but model error rates dropped incrementally as image texture, DEM-derived terrain variables, and other ancillary GIS layers were added. For classification trees making use of all available predictors, average overall test error rates were 7.8% for palustrine wetland/upland models and 17.0% for palustrine wetland type models, with consistent accuracies across years. However, models were prone to wetland over-prediction. While the predominant PEM class was classified with omission and commission error rates less than 14%, we had difficulty identifying the PAB and PSS classes. Ancillary vegetation information greatly improved PSS classification and moderately improved PFO discrimination. Association with geothermal areas distinguished PUS wetlands. Wetland over-prediction was exacerbated by class imbalance in likely combination with spatial and spectral limitations of the TM sensor. Wetland probability surfaces may be more informative than hard classification, and appear to respond to climate-driven wetland variability. The developed method is portable, relatively easy to implement, and should be applicable in other settings and over larger extents.     

Comparison of interfaces in Ti composites reinforced with uncoated and TiB2/C-coated SiC fibres

Interfaces play an important role in determining the mechanical properties of composite materials. The interfaces established between a titanium-alloy matrix (Ti-6Al-4V) and uncoated and TiB₂/C-coated SiC fibres are analysed by scanning electron microscopy, transmission electron microscopy and X-ray techniques. Emphasis is placed upon the interfacial morphology and microstructure, identification of reaction products, and the stability of the coating layer. Complex multi-reaction layers are observed frequently in the interfacial zones. Previous, often contradictory, reports about the interlayers are reviewed. Experimental observation demonstrates that the type and distribution of interlayers vary in a given system, due to prolonged treatment of the samples at temperature. The formation and distribution of the interlayers are discussed further, with respect to these and previous findings. Methods of reducing interfacial reactivity are discussed.     

模型桥墩局部冲刷瞬时地形数据自动获取装备研制

模型试验中冲刷地形测绘装备相对落后,致使桥墩周围局部冲刷瞬时地形数据无法实时获取,冲刷动态发展过程及机理的模型试验研究工作难以开展。研制了一种模型桥墩局部冲刷瞬时地形数据等值线自动绘制装备,并利用室内水工模型试验优化了各组成的性能指标,量化了绘制装备的设计参数,分析了监测系统在模型应用中的测绘精度及在工程原型中的适用性。模型试验研究表明,该装备结构简单,操作方便,加工制作成本较低,精度及灵敏性较高,能够快速获取动态过程中局部冲刷瞬时地形等值线,适用于局部冲刷发展影响流场特性研究中的水下地形快速测绘,也可按放大比尺制作成型后应用于涉水建筑物周围水下地形监测。     

3D human pose estimation in motion based on multi-stage regression

3D human pose estimation in motion is a hot research direction in the field of computer vision. However, the performance of the algorithm is affected by the complexity of 3D spatial information, self-occlusion of human body, mapping uncertainty and other problems. In this paper, we propose a 3D human joint localization method based on multi-stage regression depth network and 2D to 3D point mapping algorithm. First of all, we use a single RGB image as the input, through the introduction of heatmap and multi-stage regression to constantly optimize the coordinates of human joint points. Then we input the 2D joint points into the mapping network for calculation, and get the coordinates of 3D human body joint points, and then to complete the 3D human body pose estimation task. The MPJPE of the algorithm in Human3.6 M dataset is 40.7. The evaluation of dataset shows that our method has obvious advantages.     

Response correction techniques for surrogate‐based design optimization of microwave structures

Simulation‐based optimization has become an important design tool in microwave engineering. However, using electromagnetic (EM) solvers in the design process is a challenging task, primarily due to a high‐computational cost of an accurate EM simulation. In this article, we present a review of EM‐based design optimization techniques exploiting response‐corrected physically based low‐fidelity models. The surrogate models created through such a correction can be used to yield a reasonable approximation of the optimal design of the computationally expensive structure under consideration (high‐fidelity model). Several approaches using this idea are reviewed including output space mapping, manifold mapping, adaptive response correction, and shape‐preserving response prediction. A common feature of these methods is that they are easy to implement and computationally efficient. Application examples are provided. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.