真空吸附在薄型铝材零件加工中的应用

公司新产品试制过程中有一批导烟板系列零件,外形纤薄且为铝合金材料,无法完全使用传统夹具装夹或磁性吸附方式固定零件来完成零件数控成形加工。我们通过真空吸附装夹加工的应用,最终完成了零件试制加工任务。该套真空吸附加工方案的应用,为其他薄型铝材零件装夹加工提供了有益的借鉴。     

不同浊度下的泥沙对水体镉、铅、砷去除的影响分析

针对流域突发性重金属污染,不同浊度下的泥沙对重金属有一定的去除效果。以浊度为指示指标,通过试验研究了常温(25 ℃)和低温(5 ℃)条件下浊度50～650 NTU(Nephelometric Turbidity Unit)范围内泥沙对重金属镉、铅、砷吸附去除的影响。试验结果表明:泥沙对重金属镉、铅、砷的去除效果为铅＞镉＞砷,其中铅的去除率达到99%。浊度与能处理达标的最高重金属浓度呈线性关系,常温下浊度与能处理达标的最高镉、铅、砷浓度关系曲线的相关系数分别为0.996、0.998、0.999,低温下其相关系数分别为0.999、0.996、0.998。常温较低温更利于泥沙对重金属镉、铅、砷的去除,能去除更高浓度的重金属,达到生活饮用水卫生标准。     

The adsorption characteristics of two Mo sites on a sulfided MoO3/γ-Al2O3 surface

The surface structure of the oxidized and ammonia dissolved MoO₃/-Al₂O₃ samples and the adsorption characteristics of the sulfided samples were investigated by Laser Raman Spectroscopy (LRS) and Low Temperature Infrared Spectroscopy (LTIR) techniques.It was verified that there were two kinds of coordinated unsaturated Mo sites (denoted as Mo_A(CUS) and Mo_B(CUS)) on the surface and the precursors of Mo_A(CUS) and Mo_B(CUS) were Mo(O) and Mo(T), respectively. It was also concluded that Mo_A(CUS) sites could adsorb NO and CO, while Mo_B(CUS) could adsorb CO only. The surface concentration of Mo_A(CUS) might be far smaller than that of Mo_B(CUS).     

天然沸石与纳滤组合工艺处理铜突发污染的应用

纳滤工艺被广泛应用于分散式饮用水深度处理,能解决饮用水苦咸化,盐碱化或微污染等常规水处理工艺无法规避的用水风险,在长时间运行过程中还能有效应对重金属等突发污染风险。但重金属污染易加重纳滤膜污染,需要增设预处理装置加以缓冲,实现纳滤装置的长久稳定运行。而天然沸石具有良好的筛分性能和吸附性能,能够有效缓冲重金属对纳滤装置的冲击。试验以重金属铜为例,证明水中铜离子会造成纳滤不可逆污染比例增加,不利于系统稳定运行;天然沸石对铜离子有很好的吸附效果,静态吸附试验表明天然沸石对水中铜离子的最大吸附量为3.03 mg/g,通过正交试验合理设计吸附预处理,能够有效为纳滤工艺提供安全进水,保证纳滤进水铜离子浓度低于10 mg/L。实践工艺中,吸附预处理能有效缓解纳滤膜不可逆污染,而且吸附-纳滤组合工艺对铜离子及部分其他重金属离子表现出良好的处理效果。     

ADSORPTION OF GALLIUM WITH N_503LEVEXTREL RESIN

ＡＤＳＯＲＰＴＩＯＮＯＦＧＡＬＬＩＵＭＷＩＴＨＮ＿５０３ＬＥＶＥＸＴＲＥＬＲＥＳＩＮＣｈｅｎ，Ｊｉａｎｒｏｎｇ；Ｈｕ，Ｊｉａｎｈｕａ；Ｐｅｎｇ，Ｃｈａｏｑｕｎ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔｒｙ，ＺｈｅｊｉａｎｇＮｏｒｍａｌＵｎｉｖｅｒｓｉｔ...     

Degradable Superhydrophilic Iron-Pillared Bentonite Doped with Polybutylene Adipate/Terephthalate Open-Cell Foam: Its Application in Dye Degradation,Removal of Heavy Metal Ions,and Oil–Water Separation

Development of industrialization has brought convenience to people's lives; however, it has also brought serious harm to the environment, where, water pollution is the most obvious. Here, a polybutylene adipate terephthalate (PBAT) open-cell foam doped with iron-pillared bentonite (IPB) is prepared by using sugar as a pore-forming agent and solution phase separation, and then combined with a solution dipping method to coat the foam surface with a polyacrylamide/SiO₂, which makes the PBAT foam superhydrophilic. The static adsorption effect of superhydrophilic IPB-doped PBAT open-cell foam on methylene blue (MB) and Cu²⁺ is studied. The adsorption isotherm fitting shows that the adsorption conforms to the Langmuir model and it has biased toward monolayer adsorption. The adsorption kinetics fitting confirms that the adsorption process is in line with the pseudo-second-order adsorption model, which is dominated by chemical adsorption. The modified PBAT open-cell foam has an adsorption effect on Cu²⁺; however, it has weak cyclic adsorption capacity. It shows a good cyclic adsorption ability for the cationic dye MB and it has >95% photodegradation efficiency of the MB after five time's cyclic adsorption. The superhydrophilicity makes the foam to have better applications in oil–water separation.     

A new application of Hydroxyapatite extracted from dromedary bone: Adsorptive removal of Congo red from aqueous solution

The aim of this paper is to evaluate the efficiency of the natural hydroxyapatite powder for anionic dye (Congo red) elimination from water and optimization of adsorption process parameters that are contact time (0-360 min), solution pH (4-9), initial dye concentration (400-2400 mg/l), and adsorbent dosage (0.4-20 g/l). Natural hydroxyapatite with high surface area was prepared from animal agriculture waste dromedary bone. X-ray diffraction, transmission electron microscopy, transform infrared spectroscopy, and elemental analysis characterizations of the powder prepared show a hexagonal structure, the irregular form of hydroxyapatite and presence of other elements as trace element. The results of adsorption tests demonstrated the high efficiency of natural hydroxyapatite for removal of Congo red from water solution whose maximum experimental capacity adsorption of Congo red by natural hydroxyapatite is 900 mg/g at pH 4.5, equilibrium time 240 min and adsorbent dosage 2 g/l. According to the correlation coefficient value, the pseudo-second order kinetic model identified the sorption mechanism of pollutant used on natural hydroxyapatite. The Freundlich isotherm is the best representative theoretical model of the dye molecules’ adsorption on the natural hydroxyapatite support.     

不同晶型纳米二氧化锰制备及对亚甲基蓝吸附性能

以高锰酸钾（KMnO₄）为氧化剂、硫酸亚铁铵[（NH₄）₂Fe（SO₄）₂]为还原剂,用水热氧化还原反应制备了层状δ-二氧化锰和隧道型α-二氧化锰纳米材料。用X射线衍射（XRD）、扫描电镜（SEM）和氮气吸-脱附技术对产物的晶型、形貌及孔结构进行了表征。实验结果表明,δ-二氧化锰呈花状微球形貌,具有介孔结构（平均孔径为3.4 nm）,BET比表面积为219 m²/g;α-二氧化锰呈纳米线束形貌,具有部分介孔结构（平均孔径为35.7 nm和154.6 nm）,BET比表面积为26 m²/g。研究了不同晶型纳米二氧化锰对亚甲基蓝的吸附性能。实验结果表明,在相同条件下α-二氧化锰的吸附性能优于δ-二氧化锰,且在碱性环境下吸附效果较好。当反应时间达到120 min时,α-二氧化锰和δ-二氧化锰对亚甲基蓝的去除率分别为84.4%和82.9%。     

磁性金属有机框架材料制备及吸附性能研究

利用简单的溶剂热法合成了MIL-101（Fe）/CoFe₂O₄和MIL-101（Fe）/NiFe₂O₄磁性金属有机框架纳米复合材料。通过X射线衍射仪（XRD）、扫描电子显微镜（SEM）、振动磁强计（VSM）、热重分析仪（TGA）和紫外可见分光光度计（UV）等对复合材料的相结构、形貌、磁性能和吸附性能进行了研究。将磁性金属有机框架材料用于吸附污水中罗丹明B（RhB）,研究了罗丹明B初始质量浓度对复合材料吸附能力的影响。结果表明,制备的磁性金属有机框架复合材料的形貌均匀、结晶度高,具有高的饱和磁化强度。复合物具有金属有机框架材料和磁性材料的双重优点。MIL-101（Fe）/CoFe₂O₄对罗丹明B有较高的吸附能力（97.3 mg/g）。热力学研究发现吸附等温方程符合Langmuir模型,吸附动力学研究表明吸附机制与吸附质和吸附剂有关。磁性金属有机框架纳米复合材料作为污水处理剂将具有广阔的应用前景。     

含钛高炉渣制备CaTiO3-多孔地质聚合物光降解吸附材料

含钛高炉渣作为固体废弃物,国内存量巨大,且其中的钛组元难以提取,导致含钛高炉渣综合利用一直没有得到有效解决。针对当前含钛高炉渣利用率低、附加值低等问题,基于含钛高炉渣成分特点,通过选择性析晶(CaTiO₃优势析出)、碱激发,制备出CaTiO₃-多孔地质聚合物的复合材料。试验结果表明,析晶温度1 400 ℃、保温1 h能够促进CaTiO₃的优势析出,而剩余氧化物以玻璃相形式存在。制备出的CaTiO₃-多孔地质聚合物材料结合了CaTiO₃高光催化活性与多孔地质聚合物比表面积大的优点,对亚甲基蓝具有优异的吸附效果,最大吸附量可达60.4 mg/g。在投加量为50 mg,2 h吸附、3 h光降解条件下,对亚甲基蓝去除率可达94.5%,在治理有机污染领域有良好的应用前景。