进口刀盘圆环失效原因及改进

首先从材料力学角度分析了抚顺石化公司干法腈纶装置原进口切断刀盘圆环失效的原因 ,认为此种切断刀盘圆环系二维增强结构层压板 ,层间没有纤维增强 ,需要解决由二维增强向三维增强的过渡。给出了改进办法 ,寻求到三维增强的替代材料。同时介绍了机械加工测试及在线实验     

光学镜头调制传递函数的测试

为了定量、客观、全面地评价光学镜头的像质,介绍了光学镜头调制传递函数的测试。先简要叙述了测试的原理,并给出计算公式;然后介绍了测试步骤,其中包括固定、穿轴、测试中心视场和测试轴外视场;最后介绍了测试时的注意事项,包括对测试工装的要求、对测试平面的要求和正、负轴外视场测试值相差较大时的处理办法。     

民间传统御寒器具——火桶设计研究

＂火桶＂是南方传统的御寒器物,它具有造型简单,取材方便,功能实用多样的特点,凝聚了民间朴素造物的思想。同时,火桶所具有着深厚的人文特点和文化内涵。文章以黔东南镇远地区民间火桶为例,分析其形态、结构、功能及人机关系等内容,探究民间造物的设计巧思。     

Evaluating the 1931 CIE color‐matching functions

The use of colorimetry within industry has grown extensively in the last few decades. Central to many of today's instruments is the CIE system, established in 1931. Many have questioned the validity of the assumptions made by Wright¹ and Guild,² some suggesting that the 1931 color‐matching functions are not the best representation of the human visual system's cone responses. A computational analysis was performed using metameric data to evaluate the CIE 1931 color‐matching functions as compared to with other responsivity functions. The underlying assumption was that an optimal set of responsivity functions would yield minimal color‐difference error between pairs of visually matched metamers. The difference of average color differences found in the six chosen sets of responsivity functions was small. The CIE 1931 2° color‐matching functions on average yielded the largest color difference, 4.56 ΔE. The best performance came from the CIE 1964 10° color‐matching functions, which yielded an average color difference of 4.02 ΔE. An optimization was then performed to derive a new set of color‐matching functions that were visually matched using metameric pairs of spectral data. If all pairs were to be optimized to globally minimize the average color difference, it is expected that this would produce an optimal set of responsivity functions. The optimum solution was to use a weighted combination of each set of responsivity functions. The optimized set, called the Shaw and Fairchild responsivity functions, was able to reduce the average color difference to 3.92 ΔE. In the final part of this study a computer‐based simulation of the color differences between the sets of responsivity functions was built. This simulation allowed a user to load a spectral radiance or a spectral reflectance data file and display the tristimulus match predicted by each of the seven sets of responsivity functions. © 2002 Wiley Periodicals, Inc. Col Res Appl, 27, 316–329, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.10077     

Acquired Predator Recognition by Fathead Minnows: Influence of Habitat Characteristics on Survival

In this study we conditioned fathead minnows (Pimephales promelas) to recognize the odor of a perch (Perca flavescens) by exposing them to perch odor coupled with minnow alarm cue. We then staged encounters between the predator and prey in order to assess whether the predator odor training had any effect on survival of the prey. We tested for a survival effect in the presence and absence of shelter. Our results indicate that fish trained with alarm signals to recognize predators gained a survival benefit during staged encounters with a predator and that habitat characteristics influenced the survival of conditioned fish.     

Influence of polymer molecular weight on selected thermodynamic properties of polymer/solvent systems and the application of the UNIFAC theory

The intrinsic viscosities of eleven narrow molecular weight distribution polystyrene samples ranging from number-average molecular weight 1820 to 1 292 000 have been determined in pure solvents of tetrahydrofuran and chloroform with a Ubbelohde No. 1 viscometer at 25°C. By combining the original and modified Fox-Flory viscosity treatments, respectively, with the Flory-Huggins Lattice theory, the interaction parameters were calculated. With the aid of original and modified UNIFAC methods the solvent activity, clustering function of the solvent, and the interaction parameter were computed and compared with the experimental data. It was established that the influence imposed by the polymer molecular weight on the activity of the solvent, the clustering function of solvent, and interaction parameter is insignificant. The modified UNIFAC method satisfactorily predicted the solvent activity as illustrated by previous investigators. However, both UNIFAC methods failed to predict the interaction parameter.     

The voidage function and effective drag force for fluidized beds

Here, an experimental investigation on the effective drag force in a conventional fluidized bed is presented. Two beds of different particle size distribution belonging to group B and group B/D powders were fluidized in air in a diameter column. The drag force on a particle has been calculated based on the measurement of particle velocity and concentration during pulse gas tests, using twin-plane electrical capacitance tomography. The validity of the voidage function “correction function”, (1−ε_s)ⁿ, for the reliable estimation of the effective drag force has been investigated. The parameter n shows substantial dependence on the relative particle Reynolds number , and the spatial variation of the effective static and hydrodynamic forces. It is also illustrated that, a simple correlation for the effective drag coefficient as function of the particle Reynolds number (Re_p), expressed implicitly in terms of the interstitial gas velocity, can serve in estimating the effective drag force in a real fluidization process. Analysis shows that, the calculated drag force is comparable to the particle weight, which enables a better understanding of the particle dynamics, and the degree of spatial segregation in a multi-sized particle bed mixture. The analogy presented in this paper could be extended to obtain a generalized correlation for the effective drag coefficient in a fluidized bed in terms of Re_p and the particle physical properties.     

基于Morlet小波变换和改进遗传算法的动态识别

如何合理地识别大型复杂结构的动力参数一直是工程领域关心的问题.为此,以Morlet小波变换和采用单亲遗传算子的改进遗传算法为基础,构造一结构动态参数识别模型.并且以C++为平台,通过计算机内部命令调用ANSYS等软件,实现识别模型的程序化.通过模拟算例计算,计算结果与理论值一致.同时,结合一水电站厂房现场振动试验,对该大型结构进行动态参数识别,识别结果与工程经验值基本吻合.     

超低功耗智能监护报警器研究与设计

该文针对现有国内婴幼儿智能护理产品的优缺点,深入分析了如何防止睡觉受凉和尿床等问题,并对国外婴幼儿护理产品和婴幼儿护理理论进行了深入研究,设计了一种新型的智能化监护报警器。该报警器以低成本的松翰单片机为核心,采用纽扣电池供电,实现了超低功耗设计。实验表明,该装置集尿湿报警、走失报警、踢被报警、发烧报警和人工呼救多功能于一体,在具有使用安全、性能可靠、低功耗、报警及时、准确等优点的同时,还具有极好的性价比。     

考虑冷变形加工硬化的翻边力理论计算

在分析现有计算公式存在不足的基础上,根据翻边变形区材料的应力应变特点,考虑了冷变形加工硬化(取幂函数硬化规律)和变形区材料厚度变化(翻边为变薄)两个因素的影响,利用金属塑性成形问题求解理论中的主应力法,推导和提出了圆孔翻边力计算的一个新公式.通过用钢板(SPCC)和铜板(T1)进行了翻边工艺试验的验证,并与经验公式和现有理论公式的计算结果进行了比较,表明新公式计算结果能接近于实际,且原理上更为科学合理.