瓦斯燃烧器回流区测试

燃烧器流场内回流区的大小和形状决定了燃烧火焰的稳定性 ,利用APV激光测速系统 ,在燃烧器冷态测试实验装置上对一瓦斯燃烧器冷态模型的流动进行了研究 ,发现了该燃烧器流场内的双回流区结构 ,并得到了中心回流区尺寸与稳焰器结构的关系 ,为该结构类型燃烧器的稳焰设计及稳焰能力的评价提供了实验依据     

用C++ Builder实现数字图像的平滑处理

介绍了图像增强技术中，空间域处理方法中的邻域平均法的原理、算法，及该原理在windows平台上以C＋＋ Builder为开发工具的具体程序实现。     

STUDY ON GIS BASED PREDICTION SYSTEM FOR RADIO WAVE PROPAGATION IN UBAN REGION

In this letter, an integrated application of the prediction for radio wave propagation with the Geographic Information System (GIS) is presented and a real prediction system based on GIS is implemented.     

利用空间多普勒调谐技术冷却原子及其速度单一化

本文理论计算了用圆锥管内多次全反射激光而产生的多普勒频移来冷却原子束的机制。给出了最佳冷却原子束的圆锥管的夹角、长度、反射次数及激光入、出射角等参数。理论计算了原子束经过圆锥管冷却的速度分布情况。数值计算结果表明：采用两个长１３０ｃｍ的锥形管来冷却原子束，选用合适的失谐量可使极大部分速度小于１２００ｍ／ｓ的原子冷却到８ｌｍ／ｓ，并且可得到单一速度的高亮度的原子束。     

圆管流动的二次转捩

利用直接数值模拟方法求解N-S方程来研究空间发展的圆管转捩,计算中雷诺数Re选定为3000。在局部壁面引入的周期性吹吸(PSB)扰动作用下,圆管中首先出现了塞流结构,并向下游迁移,同时有稳定的流向条带结构形成;在塞流结构离开计算域后,随着扰动的不断发展,流向条带结构逐渐破裂失稳,圆管流动出现了第二次转捩,这是一种新的转捩形式,我们称之为“二次转捩”。     

基于协方差矩阵变换的相干源个数估计

正确地估计信号源个数是高分辨阵列信号处理的一个重要组成部分,本文提出了一种相干源个数估计的方法。这种方法是先采用空间平滑技术对信号源去相关,然后对阵列协方差进行酉变换,最后用基于协方差矩阵变换的信息论准则和盖氏半径(Gerschgorin Radii)两种方法估计信号源个数。计算机仿真结果证实了方法的可行性。     

Analyses and Solutions of Specific Cases in Spatial Angles Calculation

1 Introduction “Spatial Angles Calculations” means that all the calculations of given and unknown parameters are related to calculating angles in 3D space. The functions and relevant parameters in 3D space are much more complicated than that in 2D space, i.e. on a plane. Professor Sun, based on his research conducting for more than a decade, presented a series of new algorithms to calculate angles in space which are valuable in both theory and applications[1]. The authors found that, in g…     

异构空间信息的分级共识模型研究

Internet上异构、分布的空间信息因各自独立、相对封闭而无法相互沟通和协作,从而形成了空间信息孤岛。论文利用计算机的知识表示理论和Ontology技术能够明确表达相关领域共识的特点,探索性地提出了异构空间信息的分级共识模型。该模型为解决上述问题提供了一条切实可行的新思路。     

Procedures for analysis of strain transfer in the acetabular region in vitro

The failure of acetabular cups via loosening, migration or fracture is partially related to the stress distribution existing in the acetabular region. The complexity of the investigation of these stresses demands the application of a variety of model testing techniques involving combined embedded strain gauging, finite element analysis, transmission and reflective photoelasticity and crack propagation studies. The application of these procedures are described and the difficulties of obtaining representative loadings and restraints are commented upon.