V型天线的行波加载公式

本文研究了ｖ型天线上电流分布与阻抗加载的关系，导出了支持天线上行波电流的阻抗加载公式。讨论了天线张角、振子半径以及振子长度与加载量的关系和规律，说明了加载Ｖ型天线的宽带特性。文中还计算了在高斯脉冲激励下，不同加载量的天线上瞬态电流的分布，由此可以表明所导加载公式的正确性与重要性。     

A novel frequency-selective metamaterial to improve helix antenna

A novel frequency-selective metamaterial with negative permittivity and permeability for improving directivity and gain of a helix antenna is presented in this paper.The proposed metamaterial is composed of two Z-shape resonators printed on opposite sides of a dielectric substrate.Two forms of multilayered cells are found to be suitable for antennas and waveguides applications.In addition,a new method of designing a metamaterial-based helix antenna is presented with high directivity and gain.A comparison on radiation properties is given between the conventional and the new metamaterial-based helix antennas.Two comparisons on radiation properties are performed:(1) the effect of proposed Z-structure on monopole,dipole,and helix antennas;(2) the effect of OE3,split-ring resonator (SRR),and proposed Z-structure unit cells on the performance of helix antennas.The results show improvement of parameters such as directivity,gain,and radiation power of the new metamaterial-based helix antenna.Therefore,the combination of Z-structure with the helix antenna shows the best performance.     

多用户MIMO系统低复杂度收发联合波束成形方案

基于多用户多输入多输出(MIMO)有限反馈系统提出了一种收发联合波束成形方法。该方法在发送端采用每个用户酉速率控制(PU2RC)波束成形技术,在接收端采用基于信干噪比(SINR)最大化的天线合并算法。天线合并算法利用用户SINR的广义Rayleigh熵特性寻找最佳的天线合并矢量。仿真结果表明,该方法能充分利用信道信息,不仅改善了传统PU2RC系统的和速率性能,相对于已有的迫零(ZF)联合波束成形方法,对信道状态信息的量化误差的敏感性更低,用户选择算法的复杂度更低,且低速率反馈条件下和速率性能更优。     

光催化降解废气过程中紫外辐射照度模拟和优化

为在光催化设计中合理布置紫外灯,减少光在传输过程中的损失,概括总结径向辐射模型、多点源叠加近似辐射模型和离散坐标辐射模型等3种经典的紫外辐射物理模型;基于离散坐标辐射模型模拟某公司生产的光催化氧化废气处理装置的紫外辐射照度;通过调整灯管布置距离改变光强分布,并拟合光催化单元和光催化网表面的平均紫外辐射照度随灯管布置距离变化曲线.结果表明,距离参数在55～65 mm时,该光催化反应装置的光能利用率较好;紫外灯的合理布置可有效提高光能利用率.     

带平衡约束矩形布局优化问题的深度强化学习算法

带平衡约束的矩形布局问题源于卫星舱设备布局设计,属于组合优化问题。深度强化学习利用奖赏机制,通过数据训练实现高性能决策优化。针对布局优化问题,提出一种基于深度强化学习的新算法DAR及其扩展算法IDAR。DAR用指针网络输出定位顺序,再利用定位机制给出布局结果,算法的时间复杂度是O（n³）;IDAR算法在DAR的基础上引入迭代机制,算法时间复杂度是O（n⁴）,但能给出更好的结果。测试表明DAR算法具有较好的学习能力,用小型布局问题进行求解训练所获得的模型,能有效应用在大型问题上。在两个大规模典型算例的对照实验中,提出算法分别超出和接近目前最优解,具有时间和质量上的优势。     

人水关系学的学科体系及发展布局

人水关系是人类与自然界关系中最重要的关系之一,也是人类一出现就始终存在且复杂程度不断加深的一类关系。在对人水关系分析总结的基础上,提出了人水关系学的概念和思考,论述了人水关系学的提出背景和重要意义;构建了人水关系学的学科体系框架,阐述了人水关系学的主要内容,包括人水关系学的理论基础、方法论、应用实践;在分析学科发展趋势的基础上,对人水关系学未来全面、系统的研究进行了展望,并从科学研究、学科建设、学术交流与国际合作3个方面对人水关系学的发展进行战略布局。为进一步研究人水关系、丰富人水关系学内容、发展人水关系学学科体系及制定学科发展战略提供参考。     

Layout Optimization for Greenhouse WSN Based on Path Loss Analysis

When wireless sensor networks (WSN) are deployed in the vegetable greenhouse with dynamic connectivity and interference environment, it is necessary to increase the node transmit power to ensure the communication quality, which leads to serious network interference. To offset the negative impact, the transmit power of other nodes must also be increased. The result is that the network becomes worse and worse, and node energy is wasted a lot. Taking into account the irregular connection range in the cucumber greenhouse WSN, we measured the transmission characteristics of wireless signals under the 2.4 Ghz operating frequency. For improving network layout in the greenhouse, a semi-empirical prediction model of signal loss is then studied based on the measured data. Compared with other models, the average relative error of this semi-empirical signal loss model is only 2.3%. Finally, by combining the improved network topology algorithm and tabu search, this paper studies a greenhouse WSN layout that can reduce path loss, save energy, and ensure communication quality. Given the limitation of node-degree constraint in traditional network layout algorithms, the improved algorithm applies the forwarding constraint to balance network energy consumption and constructs asymmetric network communication links. Experimental results show that this research can realize the energy consumption optimization of WSN layout in the greenhouse.     

基于STK的靶标布设分析建模与仿真

由于靶标布设是航天测控的重要问题之一,覆盖分析为靶标布设提供重要的参考依据.为研究靶标布设的规律特点,提高测控质量,提出了利用STK进行仿真分析.针对某个工程中的靶标布设问题,采用卫星携带相机的侧摆情况和相机类型的情况,对卫星过境的覆盖品质进行了分析建模.并运用MATLAB与STK软件进行联合仿真,得出6种模式下的覆盖结果.仿真结果表明,无论是否侧摆还是相机类型不同的情况下,卫星过境时长均只与所处纬度有关,与经度无关,并且纬度越高,覆盖品质越好.     

接灯片级进模设计

分析了接灯片冲压工艺和采用级进模生产的可行性 ,介绍了排样设计、模具结构特点及其工作过程     

Design of the broadband microstrip array antenna for blast furnace surface monitoring

Aiming at the requirements of high-resolution imaging and high integration of the blast furnace radar,this paper presents a method for designing a wideband microstrip array antenna,which broadens the antenna bandwidth through the design of parasitic patches and air layers.By combining multi-input multi-output (MIMO) radar and synthetic aperture radar (SAR) imaging principles,a linear MIMO array is designed,and a near-field simulation imaging experiment is performed on the simulated feed line through the wave number domain imaging algorithm.Simulation results show that the gain of the main lobe of the antenna can reach 14.05 dBi,the reflection coefficient is less than -10 dB,the absolute bandwidth is 5.25 GHz,the operating frequency is 20.67~25.92 GHz,and the range resolution is increased to 3 cm compared with the existing blast furnace radar.The average error of the azimuth direction of the simulated material line imaging is 0.008 m,and the range direction is 0.0011 m.Compared with the traditional microstrip array antenna,this antenna effectively widens the bandwidth,and the range resolution is higher than that of the traditional blast furnace radar.It can accurately obtain the shape information on the simulated material line,and has an engineering application value for blast furnace surface monitoring.