一步法生产涤纶FDY工艺的探讨

利用ＫＶ７３１纺丝设备一步法生产出涤纶ＦＤＹ，探讨了热辊拉伸和熔体温度对纤维质量的影响。采用高特性粘数的聚酯切片，严格控制纺丝工艺，可以在５０００ｍ／ｍｉｎ的纺丝速度下纺制高质量的细旦涤纶ＦＤＹ。     

我国建筑涂料的技术水平及发展方向

介绍了我国建筑涂料的技术水平、发展方向及前景。     

Application of CO2 laser heating zone drawing and zone annealing to nylon 6 fibers

Nlon 6 fibers were zone drawn and zone annealed by using a continuous wave carbon dioxide laser to develop their mechanical properties. A laser‐heating zone drawing was carried out under a applied tension of 35.4 MPa at a power density of 9.65 W · cm^?2, and then the zone‐drawn fiber was annealed. A laser‐heating zone annealing was carried out in two steps at a power density of 9.65 W · cm^?2; the first step was carried out under 423 MPa and the second under 517 MPa. The treating temperature of the fiber heated by the CO₂ laser was measured by using an infrared thermographic camera equipped with a magnifying lens. The treating temperature at the zone drawing is 138°C, and those at the first and the second zone annealing are 121 and 125°C, respectively. The second laser‐heated zone‐annealed fiber has a birefringence of 65.2 × 10^?3, a degree of crystallinity of 54%, and a storage modulus of 21 GPa at 25°C. Wide‐angle X‐ray diffraction patterns for the laser‐heated zone‐drawn and the zone‐annealed fibers show (200) reflection and (002/202) doublet due to only an α form on the equator. The laser‐heated zone‐drawn fiber has a melting endotherm peaking at 216°C and a trace of shoulder on the higher temperature side of its peak, and the laser‐heated zone‐annealed fibers have a single melting endotherm peaking at 216°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1711–1716, 2002     

中国涂料现状及今后发展热点(一)

综述了目前中国涂料业的发展概况,并介绍了今后发展趋势和研究热点──防腐蚀涂料、卷材涂料、功能涂料、绿色木器涂料和粉末涂料等5种涂料。     

建筑装饰陶瓷饰面砖的应用与发展

分析建筑装饰陶瓷饰面砖的装饰特点，针对陶瓷饰面砖自重大、易脱落、装饰效果受装饰施工技术及质量的影响等问题，提出陶瓷饰面砖的发展应注重适应装饰施工技术及应用而进行产品的技术创新。     

仿生学在涂料开发中的应用

简要介绍了仿生学研究的基本情况及其在海洋防污涂料、建筑涂料、伪装隐身涂料等中的应用发展概况。     

网络结构增长的极端学习机算法

针对极端学习机(extreme learning machine,ELM)结构设计问题,基于隐含层激活函数及其导函数提出一种前向神经网络结构增长算法.首先以Sigmoid函数为例给出了一类基函数的派生特性:导函数可以由其原函数表示.其次,利用这种派生特性提出了ELM结构设计方法,该方法自动生成双隐含层前向神经网络,其第1隐含层的结点随机逐一生成.第2隐含层的输出由第1隐含层新添结点的激活函数及其导函数确定,输出层权值由最小二乘法分析获得.最后给出了所提算法收敛性及稳定性的理论证明.对非线性系统辨识及双螺旋分类问题的仿真结果证明了所提算法的有效性.     

国产短程纺牵联合机纺制烟用聚丙烯丝束的工艺研究

用国产SLHP001短程纺牵联合机和SLHP 101丝束加工联合机,通过选择合理生产工艺,着眼于提高纤维的刚性和膨松性,研制出了高质量的烟用聚丙烯丝束。不加胶粘剂成型的滤棒(120mm),圆周稳定,硬度达到88%—89.5%,吸阻为3.2-3.4kPa,产出率达到125万支/t,比国内同类产品高15—20万支/t。     

合成树脂型防霉建筑涂料的研究及其施工

以合成树脂为主要成膜物质,加入环保型杀菌防霉剂及功能性颜填料,制成防霉期长、装饰性好、成本低、环保的合成树脂型防霉建筑涂料。