高分2号图像业务化大气校正查找表的设计与实现

为实现高分2号图像(GF2)业务化大气校正,利用矢量6S模型(6SV)将辐射传输散射与吸收进行分离计算,其中散射部分采用涵盖各种大气模式、气溶胶类型、成像几何等条件下的大气校正查找表(look-up tables,LUTs)表示,大气吸收部分采用6SV拟合计算的6种大气模式下大气透过率的经验公式表示,这种处理有效简化了查找表大小.在内存4 GB、主频3.10 GHz条件下,通过比较基于本查找表方法和基于FLAASH大气校正软件对北京地区一景GF2数据处理.结果表明:以6SV模型直接大气校正法结果作为真值,两者的绝对误差分别为0.8%和2.6%,处理时间分别为77 s和240 s,该大气校正查找表在处理精度和效率更加适合业务化大气校正.     

Direct numerical simulations for assessment of gas-solid drag models in two-dimensional random arrays of particles

The momentum exchange between the phases plays a vital role in modelling of gas–solid flows and it is mathematically described by drag models. However, no consensus exists on which drag model gives the most accurate prediction of the drag force, and, despite the increase in available computing power, the same drag models are used in two-dimensional and three-dimensional simulations. In this study, direct numerical simulations of gas flow through multiple random configurations of static monodisperse particles are performed. The variations of solid volume fraction and particle Reynolds number are in the ranges of 0.05–0.4 and 13.7–136.9, respectively. The drag force exerted on particles is calculated and properly averaged. Based on the simulation results, thirteen drag models are compared and correction factors are introduced using the stochastic gradient descent algorithm. The correction factors provide a simple adjustment for the models to be used in 2D modelling.     

TURBULENCE TRANSPORT OF SURFACTANT SOLUTION FLOW DURING DRAG REDUCTION DEGENERATION

Turbulence transport of surfactant solution flow during drag reduction degeneration is investigated experimentally in a two-dimensional channel.Particle Image Velocimetry (P1V) system is used to take t...     

Abnormal growth of austenite grain of low-carbon steel

Niobium is an important alloying element for the steel. To know further the effect of Nb in the steel, the contrast experiments on the austenite grain growth of the 0.015%Nb and free Nb steels were carried out using Gleeble 1500 thermomechanical simulator. The experimental results indicate that the austenite grain of 0.015%Nb steel is finer than that of Nb free steel at 1150–1230 °C. And when the heating temperature arrives the critical temperature 1240 °C, the austenite grain of Nb steel suddenly grows up, while the austenite grain of Nb free steel changes little. Finally, the austenite grain of Nb steel is obviously coarser than that of Nb free steel. By transmission electron microscopy (TEM) using a carbon extraction replica technique, the precipitates of Nb(C,N) were not observed in the 0.015%Nb steel. It is concluded that the grain-boundary internal adsorption of Nb atoms leads to the result.     

蒸汽爆炸粗混合阶段冷液中高温球传热阻力耦合特性的实验研究

采用蒸发电力模型,设计了高温颗粒同水相互作用的实验装置,进行了一系列单个,多个粒子在不同温度,不同入水初速度和不同冷液过冷度情况下的系列阻力实验,初步实验分析表明,高温颗粒在刚刚穿过冷液表面的下沉速度明显低于冷态颗粒的速度,实验值与蒸发曳力模型计算值符合较好.     

Mineralogy of clean coal combustion by-products

Coal combustion technologies are changing in order to burn coal more cleanly. Many “clean combustion“ and postcombustion technologies are developed to remove SO2 and NOx gases, particulate matter during combustion, or from the flue gases leaving the furnace. This paper focuses on three types of fly ash (flue gas desulfurization (FGD) residuals, atmospheric fluidized bed combustion (AFBC) residuals and sorbent duct injection (SDI) residuals) which produced by “the clean combustion“ and postcombustion technologies. The residuals formed by FGD are PCFA (pulverized coal fly ash) grains entrained with reacted and unreacted sorbent and have lower bulk densities than PCFA grains because it contains higher concentrations of calcium and sulfur, and lower concentrations of silicon, aluminum and iron than PCFAs. AFBC residuals consist of spent bed which is a heterogeneous mixture of coarse-grained bed material and irregularly shaped, unfused, spherical PCFAs. The main crystalline phases in AFBC residuals are anhydrite (reacted sorbent), quartz and lime (unreacted sobent), calcite, hematite, periclase, magnetite and feldspars.The residuals produced by SDI contained 65%-70% PCFA with the larger sizes material being irregularly shaped, fused or roughedged. The reaction products of sorbent (portlandite and lime) included calcium sulfate (anhydrite) and calcium sulfate. The chemical properties of these residuals are similar to those of high calcium PCFAs because of the high alkalinity and high pH of these residuals.     

Molecular dynamics simulations of the interaction between OH radicals in plasma with poly-β-1–6-N-acetylglucosamine

Cold atmospheric plasma shows a satisfactory ability to inactivate bacterial biofilms that are difficult to remove using conventional methods in some cases. However, the researches on the inactivation mechanism are not quite sufficient. Poly-β-1–6-N-acetylglucosamine (PNAG), which is one of the important components in some biofilms, was used as the research subject, and the related mechanism of action triggered by different concentrations of the OH in plasma was studied using reactive molecular dynamics simulations. The results showed that OH radicals could not only trigger the hydrogen abstraction reaction leading to cleavage of the PNAG molecular structure, but undergo an OH addition reaction with PNAG molecules. New reaction pathways appeared in the simulations as the OH concentration increased, but the reaction efficiency first increased and then decreased. The simulation study in this paper could, to some extent, help elucidate the microscopic mechanism of the interaction between OH radicals in plasma and bacterial biofilms at the atomic level.     

基于高海拔地区的大气中子单粒子效应实时测量试验研究

开展65 nm高速大容量静态随机存取存储器（SRAM）大气中子单粒子效应特性及试验评价技术研究,基于4 300 m高海拔地区大面积器件阵列实时测量试验,突破效应甄别、智能远程测控等关键技术,在153 d的试验时间内共观测到错误43次,其中器件内单粒子翻转39次,多单元翻转（MCU）在单粒子翻转中占比23%,最大的MCU为9位。对高能中子、热中子和封装α粒子的贡献比例进行了分析,并基于多地中子通量数据,推演得到北京地面和10 km高空应用时的单位翻转（SBU）和MCU失效率（FIT）。发现地面处软错误的主要诱因为封装α粒子,随着海拔的增高,大气中子对软错误的贡献比例明显增大;MCU全部由高能中子引起,北京10 km高空处的MCU FIT值明显增大,其占比由地面的8%增大至26%。结合器件版图布局,对MCU产生机理进行了深入分析。最后,提出一种目标导向的存储器软错误加固策略优化方法。     

在推力和阻力作用下飞行器横向震动分析

章重点讨论了推力和空气阻力对火箭横向振动频率和振型的影响,分析了在推力和阻力作用下频率降低的原因,给出了推力对振型频率影响的估计式。发动机喷管与火箭固联时的横向运动方程式及其相应的边界条件是分析工作的基础。中得到的主要结论适用于主动加速段、被动减速段和推力与阻力平衡时的巡航段。在小推力和小轴向过载的情况下,各种不同的计算方法所得的结果相差不大。在大推力和高过载情况下,不同的近似解与精确解的差别可能是很大的。