汽车覆盖件冲模的消失模铸造技术

消失模铸造生产冲模毛坯具有许多的优点，其工艺设计、涂料的性能等不同于普通砂型铸造。冲模铸件材料可依据模具的工作环境选择不同铸铁。结合生产实际介绍了消失模铸造的一些技术要点，并分析了常见的铸件缺陷。     

Nickel Electroplating

NICKEL ELECTROPLATING has been practicallyused for decades.There is an unknown part in theplating,although this is easy to plate.Applications ofthe plating are described from the practical viewpoint.Purpose of Nickel Electroplating(1)Decorative,and corrosion resistanceNickel electroplating is deposited on iron,cupper,zinc and aluminum substrate etc.,and chromiumplating is usually deposited on nickel plating.Hexavalent chromium plating has an important effecton the corrosion resisitan…     

PVC基阻尼涂料的制备及其流变性能

以聚氯乙烯（PVC）为基体，对苯二甲酸二辛酯（DOTP）为增塑剂，与无机填料CaCO3、钙锌热稳定剂、乳化剂OP-10、润滑剂液体石蜡等复合改性制备PVC基阻尼材料，采用动态流变仪DHR、动态热机械分析仪DMA、扫描电镜SEM等对试样的性能和形态进行表征。运用正交设计探究各组分对性能的影响规律，结果表明，填料CaCO3和增塑剂DOTP比例对其阻尼性能影响最显著；当PVC: CaCO3: DOTP: OP-10比重为45: 33: 22: 2时，25℃时频率0.01～150 Hz范围内，tan δ最大值从0.497提高到0.604；剪切速率0.1 s-1时表观黏度为3738 Pa·s，剪切速率150 s-1时表观黏度为2.19 Pa·s，具有优异的抗流挂性与稳定性。通过LASD形态分析构建微观聚集态模型，提出刚性填料团聚-解团聚和聚合物微球变形对流变性能的作用机理，为LASD的持续研究提供技术思路和理论基础。     

汽车用塑料注塑新技术的进展

综述了汽车用塑料的注射成型技术的进展，简单介绍了气体辅助注射成型(GAIM)、水辅助注射成型、熔芯注射成型、反应注射／增强反应注射(RIM／RRIM)成型等技术的特点、生产的汽车部件及最新动向。     

中国涂料现状及今后发展热点(一)

综述了目前中国涂料业的发展概况,并介绍了今后发展趋势和研究热点──防腐蚀涂料、卷材涂料、功能涂料、绿色木器涂料和粉末涂料等5种涂料。     

汽车虚拟仪表盘的仿真设计

汽车仪表盘反映了汽车行驶过程的多种参数,设计虚拟仪表盘仿真系统在教学科研中具有重要意义。在分析汽车仪表盘功能的基础上,提出了汽车虚拟仪表盘总体设计方案。编写通信程序实现了上位 PC 机和下位单片机系统的数据采集发布功能。应用VB开发了数字化汽车虚拟仪表盘界面与性能仿真系统,可模拟发动机转速、车速、温度、时间及里程等信息实时显示在计算机界面上;操作控制按钮可实现汽车转向灯指示功能。经实际试验运行显示该仿真系统工作正常,实现了对汽车仪表盘的仿真效果。     

CMOS图像传感器中分段电容DAC非理想因素研究

CMOS图像传感器信号处理中通常采用分段电容DAC产生斜坡参考电压。研究了分段电容DAC精确的电容失配及寄生与其转换精度的关系式。基于对分段电容DAC工作原理的研究,导出了电容失配及寄生模型;针对其分数桥接电容失配、各二进制电容间的失配及寄生电容问题进行了理论分析;对分段电容DAC进行非理想因素仿真,设计了一个采用分段电容DAC的10位单斜ADC并对其进行测试,仿真和测试结果均验证了理论分析的正确性。上述理论分析结果可作为分段电容DAC的设计指导。     

Reduction of NO by H2 on PdO-MoO3/γ-Al2O3 of low molybdena loading

The catalytic activity and selectivity of three PdO-MoO₃/-Al₂O₃ catalysts containing about 2% Pd and 2% Mo were studied for the reduction of NO by h₂ in the presence of varying amounts of oxygen at temperatures from 50 to 550 °C. The results are compared with those for PdO/-Al₂O₃, PdO-MoO₃/-Al₂O₃ containing 2% Pd and 20% Mo, and a commercial Pt-Rh catalyst. In the absence of oxygen, the conversion of NO to N₂ and N₂O is higher on the three catalysts than it is on PdO/-Al₂O₃ at 500 and 550 °C. In the presence of oxygen, the yields of N₂ and N₂O are generally lower on two of the PdO-MoO₃/-Al₂O₃ catalysts than on PdO/-Al₂O₃.     

Development of a high‐resolution RGBW flexible display using a white organic light‐emitting diode with microcavity structure and that of a side‐roll touch panel

In this study, white organic electroluminescent devices with microcavity structures were developed. A flexible high‐resolution active‐matrix organic light‐emitting diode display with low power consumption using red, green, blue, and white sub‐pixels formed by a color‐filter method was fabricated. In addition, a side‐roll touch display was developed in combination with a capacitive flexible touch screen.     

Eco-friendly electronics,based on nanocomposites of biopolyester reinforced with carbon nanotubes: a review

ABSTRACT

Fabrication of electronic materials from nanocomposite of biopolyesters reinforced with carbon nanotubes can be regarded as the effective alternative for conventional nanocomposites consisting of non-biodegradable polymers. Commercial availability of biopolyester-based nanocomposites is limited because of their high cost compared to other polymers, but the factor of their compostable nature is worthless for environmental protection. Such nanocomposites have potential applications in biodegradable sensors, EMI materials, etc. In this review, the current progress of biopolyester/CNTs nanocomposites in the field of biodegradable electronics is reviewed and also the impact of CNTs dispersion on electrical, thermal and mechanical properties of eco composites is stipulated.