Theory and characteristics of novel variable reluctance 1X resolver

Although brushless resolvers have been used widely as angular position transducers, they are expensive due to their intricate construction, involving a rotary transformer to supply the exciting coils wound on the rotor poles with the current. It is shown theoretically in this paper that the resolver without rotary transformer or brushes can be realized by simple construction, which consists of the stator core with both 4-poles exciting windings and 2-poles output ones and the rotor core carrying no windings. In this resolver the rotor core has minimum gap at one side and a maximum gap at another side of the diameter. It is characterized by an outer surface form that makes the fluctuation part of gap permeance very in proportion to cos θ, where θ represents the angular position of a point in the air gap with respect to the origin on the rotor, the point of minimum air gap. The method determining the rotor form to embody the aforementioned gap permeance variation is also shown. It has been confirmed not only by simulation but also experiment that the 2-phase output voltages of a model designed based on the theory have sinusoidal waveforms with very small harmonic contents. Moreover, the rotor position detected by processing the output voltages through the conventional resolver/digital converter was within acceptable engineering accuracy.     

折反光学系统最佳红外像面位置的研究

较深入地研究了折反光学系统的红外像面,为确定实际的红外像面提出了一个新方法—计算从可见光边缘无色的弥散圆到红外最佳像面的距离。实践证明,这是确定这类光学系统最佳像面的一个方便、可靠的方法。     

A three-dimensional measurement system for robot applications

This paper presents a 3D noncontacting sensor system designed to measure the position and orientation of a robot end effector. This measurement system includes two parts: a tridimensional object including four spheres placed along the axes of a tetrahedron and a set of three orthogonally pointed cameras. The purpose is to design a measurement system characterized by easy relationships in order to satisfy real-time constraints. The system has been used in two experiments: first, to calibrate a parallel robot and validate the geometrical control performance, then as an exteroceptive sensor in an assembly task. The system computes position and orientation of the tetrahedron in 100 ms time. The position and orientation accuracy are, respectively, 0.6 mm and 0.2 deg in a workspace, being a cube with 0.3 m sides.     

一种新的坡位定量描述方法及其与滑坡发生的关系

滑坡发生与地形因子的关系是区域滑坡静态规律研究的重点,但以往的研究多注重考虑其与反映几何形态的基本地形属性因子(几何形态属性因子)之间的关系,如坡度和坡向等。首先提出一种新的基于子流域内相对位置定量描述坡位(相对位置因子)的方法,并以温州地区瓯江流域1990~2001年发生的滑坡为研究对象,使用证据权法对比滑坡发生与两种不同类型地形因子之间的关系。结果表明,相对位置因子与滑坡发生的相关性大于滑坡危险性评价经常使用的几何形态属性因子;并且滑坡大多发生在定量坡位值较低的区域,这些地区处在下游,遭受流水侵蚀的强度更大、频率更高。     

动态优化不等精度经纬仪交会方法

在多台不等精度经纬仪交会测量系统中,为提高数据的可靠性和精度,根据异面交会原理,提出空间定位精度及其误差的模型;提出采用定常异动算子算法和普通加权平均法相结合的处理方法;对该算法进行数学仿真,计算分别使用定常异动算子和普通加权平均法的交会角区间,并在实际任务中加以应用。试验结果表明,采用合理的算法对多台不等精度经纬仪进行交会测量,增加了测量基线数量从而提高了整体数据的稳定性,同时提高了测量精度。     

基于ISP技术的交流伺服电机转子位置检测电路

介绍了基于ISP技术的交流伺服系统电机转子位置检测电路的设计和实现。该电路将所有的模块集成到一块高密度可编程器件中 ,提高了系统的稳定性 ;脉宽可调节的全数字四倍频电路和十二位可逆计数器保证了检测的精度 ;器件特性参数的一致性更有利于进行精确的轮廓控制     

电液系统位置精度的模糊控制

针对电液位置控制系统 ,建立了其数学模型 ,研究了模糊控制器在该场合的应用及其设计 ,并在SIMULINK环境下对模糊控制系统进行了仿真。结果显示模糊控制用于电液系统位置控制能获得令人满意的效果     

陈垃圾滚筒筛运动模式与筛分效率优化

推导陈垃圾在滚筒筛中的运动方程并求数值解,按最大位置角将陈垃圾运动模式划分成滚落、抛落、圆周运动,给出不同筛筒转速、半径、动摩擦因数下的运动模式判别云图. 滚筒筛试验结果显示,陈垃圾运动的最大位置角随转速的升高先增大后不变,转速超过50 r/min后垃圾进行圆周运动. 陈垃圾滚筒筛的筛分效率随转速增大呈先升后降的趋势,随抛落差的增大呈持续上升的趋势,随着原料水的质量分数的增加呈下降的趋势. 基于试验结果,给出滚筒筛最优转速取值云图,在实际工程中可根据垃圾动摩擦因数及滚筒半径选择最优转速,同时减小水的质量分数以提高筛分效率.