Accelerated wear testing with a microfabricated surface to evaluate the lubrication ability of biomolecules on polyethylene

Wear of ultrahigh‐molecular‐weight polyethylene (UHMWPE) and wear‐particle‐induced osteolysis and bone resorption are the major factors causing the failure of total joint replacements. It is feasible to improve the lubrication and reduce the wear of artificial joints. We need further understanding of the lubrication mechanism of the synovial fluid. The objective of this study is to evaluate the lubricating ability of three major components in the synovial fluid: albumin, globulin, and phospholipids. An accelerated wear testing procedure in which UHMWPE is rubbed against a microfabricated surface with controlled asperities has been developed to evaluate the lubrication behavior. An analysis of the wear particle dimensions and wear amount of the tests has provided insights for comparing their lubrication performance. It is concluded that the presence of biomolecules at the articulating interface may reduce friction. A higher concentration of a biological lubricant leads to a decrease in the wear particle width. In addition, in combination with the wear results and mechanical analysis, the roles of individual biomolecules contributing to friction and wear at the articulating interface are discussed. These results can help us to identify the role of the biomolecules in the boundary lubrication of artificial joints, and further development of lubricating additives for artificial joints may be feasible. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

聚丙烯增韧改性研究进展

综述了国内增韧改性聚丙烯的研究动向 ,介绍了近年来茂金属聚烯烃弹性体和有机/无机纳米粒子增韧聚丙烯的新技术     

ZPG系列盘式真空过滤机的研制与应用

详细介绍了ZPG系列盘式真空过滤机的主要特点、基本原理和主要技术参数。对盘式真空过滤机的过滤理论进行了系统的研究 ,以及为提高过滤系数和降低滤饼水分所采取的关键措施。与传统的真空过滤机进行了对比 ,表明ZPG系列盘式真空过滤机的滤饼水分可以降低 1 %～ 3 % ,过滤系数提高 3 0 %～5 0 % ,过滤每吨精矿的能耗可以降低 5 0 %左右 ,使得ZPG系列盘式真空过滤机在国内各大冶金矿山得到全面推广使用 ,创造了巨大的经济效益和社会效益。     

Physical Properties Important to Electrostatic and Non electrostatic Powder Transfer Efficiency in a Tumble Drum

ABSTRACT: Popcorn was oiled and coated in a tumble drum nonelectrostatically and electrostatically with sugar, cornstarch, salt, cellulose, maltodextrin, all-purpose flour, whole-wheat flour, or soy flour. Particle size, density, flowability, and chargeability were correlated to transfer efficiency using regression analysis. Of the various methods to measure chargeability, charge-to-mass and adhesion improvement were the most significant. For nonelectrostatic coating, small, dense, free-flowing powders were most efficient. Small, free-flowing highly charging powders were most efficient for electrostatic coating. Percent improvement was the highest for the least efficient powders. The greatest benefit with electrostatic coating was for low density, highly charging powders with no effect of size.     

The deposition morphology of Brownian/non-Brownian particles within a constricted tube

The deposition morphology of Brownian/non-Brownian particles within a constricted tube is investigated by applying the Brownian dynamics simulation method in the present paper. Two different geometric structures, the parabolic constricted tube (PCT) and the sinusoidal constricted tube (SCT), are adopted. The effect of various types of the total interaction energy curves of the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory, and of the shadow area cast by those deposited particles, on the particles’ collection efficiencies are also examined. For the PCT structure, under the same interaction energy curve, it is found that the non-Brownian particles always own a higher collection efficiency than that of the Brownian particles. Since the deposition location moves closer to the constriction part of the tube, the collection efficiencies of the Brownian/non-Brownian particles increase with the decrease of flow velocity. The SCT behaves differently, it is found that the collection efficiencies of non-Brownian particles are only slightly higher than those of Brownian particles when SCT is adopted. The steep slope of the tube wall near the constriction part of SCT dominates the whole deposition process of Brownian/non-Brownian particles. In comparison with the available experimental data, it is found that the present method can give a good simulation result.     

Facial detection and location based on skin color and eye characteristic

This paper comes true a system of facial detection and location. Firstly, it realizes the facial detection of candidate region used skin color for the given image, and considers the influence of similar skin. Secondly, it realizes the location for eye region used the gray characteristic of eye and correction of central measurement, and makes further selection for facial candidate region. The end, it normalizes the facial image and makes it as front standard image, so realizes the facial characteristic location.     

连续箱梁桥中跨合龙段劲性骨架优化设计

结合某连续箱梁桥悬臂施工实践,对中跨合龙段劲性骨架设置和受力进行了分析,推导了劲性骨架设计的理论计算公式,并分析了劲性骨架刚度大小对桥梁整体结构的影响。     

Influence of zero-loss filtering on electron optical phase contrast

Complex scattering amplitudes are used to calculate the phase contrast of colloidal gold particles. Comparison of measurements of the phase contrast intensity at the centre of the gold particle as a function of defocus for unfiltered and zero-loss filtered images demonstrates the increase in phase contrast achieved by zero-loss filtering even for a thick carbon substrate film. The granulation of amorphous germanium films is measured by the spatial rms (root mean square) values of image intensity in a defocus series.     

颗粒表面改性法制备PTC粉体的研究

本文介绍了一种通过液相颗粒表面改性技术添加二次掺杂物来制备ＰＴＣ粉体的新方法。即将烧结助熔剂Ａｌ２Ｏ３，ＳｉＯ２以及受主杂质ＭｎＯ采用溶液形式，包裹在ＢａＴｉＯ３基粉体颗粒表面进行改性，由此可以得到二次掺杂物Ａｌ２Ｏ３、ＳｉＯ２和ＭｎＯ分布均匀的ＰＴＣ粉体。     

实时跟踪控制系统中的数字滤波技术

在高精度的实时跟踪控制系统中，由探测器等其他一些因素给系统带来的噪声将不容忽视，数字滤波将是滤除噪声的有效手段，，由于系统实时性和采样频率的要求，本文介绍几种时跟踪系统中常用的数字滤波方法，并对它们在实时跟踪系统中的作用进行了和比较。