Study of the effect of ultrasonic treatment on the surface composition and the flotation performance of high-sulfur coal

This paper highlighted the use of X-ray diffraction, scanning electron microscopy and X-ray fluorescence spectroscopy to investigate the changes on the surface composition of high-sulfur coal and pyrite before and after ultrasonic conditioning. The results showed that ultrasonic conditioning resulted in a decrease in the contents of iron and sulfur in coal, an increase in the content of element carbon, and an increase in the purity of the coal. Conversely, ultrasonic conditioning led to an increase in the content of iron and sulfur in pyrite, a decrease in the impure content of calcium, and a relative increase in the purity of the pyrite after ultrasonic conditioning. This study verified that on the one hand, ultrasonic conditioning can promote the pyrite separation from the high-sulfur coal, with the separated pyrite taking the form of FeS; on the other hand, it can produce a cleaning effect on the surface of coal and pyrite with the consequent increase both in hydrophobicity of coal and hydrophilicity of pyrite. The paper introduced ultrasonic pre-treatment of the slurry and stepped froth removal tests of high-sulfur coal and the study on the yield, ash and sulfur content of clean coal in different phases. The results gave further evidence of the increases both in the rate and the selectivity of flotation. This study shows that ultrasonic conditioning can enhance the performance of de-sulphurization of high-sulfur coal flotation.     

Effect of Hydrogen Heat Treatment on the Chemical Composition of Aluminum Nitride Powder

The effect of hydrogen heat treatment on impurity contents in aluminum nitride powder of different fineness is studied. Thermodynamic calculations are provided pointing to the possibility of forming gaseous hydrogen compounds with impurity elements. It is established that as a result of treatment the contents of impurity elements, i.e. oxygen, carbon, sulfur, are reduced by a factor of 3-13. The optimum hydrogen heat treatment regime is determined: a temperature of 1323 K and an exposure time of 30 min.     

Suppression of photo-induced dilation in cyanide treated hydrogenated amorphous silicon films

Effects of cyanide (CN) treatment with hydrogenated amorphous silicon (a-Si:H) films have been investigated. The decrease of ΔV/V was observed in cyanide treated a-Si:H films and the successive thermal annealing at 200°C after CN treatment induced the further reduction of the ΔV/V. XPS spectra show the indirect evidence that the cyanide species is present within 10 nm from the hydrogenated amorphous silicon surface. The results of CN treatment with a-Si:H solar cells are demonstrated.     

Evaluation of capital cost data. part 7: Liquid waste disposal with emphasis on physical treatment

Capital cost correlations are given for oil-water separators, equalization basins, primary clarifiers, clarifiers and clarifier mechanisms, reverse osmosis unit, ultrafiltration units, gravity filters and miroscreens. Data are included for raw sewage, intermediate and recirculation pumping stations and for preliminary treatment (or bar screens, grit removal, overflow and bypass chamber and Parshall flume), for grit removal, comminution and gas stripping. The correlations are accurate to ± 30%, expressed in Canadian dollars and adjusted to a Marshall and Swift value of 1000. Details as to what components are included in the cost are given. Data are given for the labour and material costs to create a working process module. For inflation indices, a critique of the Engineering News Record, EPA small city, Marshall and Swift, Chemical Engineering and Southam inflation indices suggested that the Marshall and Swift index is most appropriate for the construction and process equipment studied here. Concerning the currency exchange, for the equipment and processes in this study, equipment costs the same whether expressed directly in US or Canadian dollars. To put the current data into perspective, several hundred sources of cost data were analyzed. The major correlations are compared, on a consistent basis, with current data.     

铸铝激光熔融处理后的组织与性能

应用光学和电子显微镜及显微硬度计研究了铸造Al-Si合金经激光表面熔融处理后的组织和性能。指出,组织分熔化区、过度区和基体三层。在熔化区中树枝状先共晶α相的平均宽度由原始组织的20～40μm细化到2～3μm,同时共晶组织也被大大细化。这些变化使显微硬度值由67.4提高至109～115.     

含过期火药粉状工业炸药的研究

文章概要论述了一种新型民用炸药－含过期火药粉状工业炸药在配方、制造工艺等方面所进行的实验研究。结果表明，该炸药性能良好、制造技术安全可靠，值得推广。     

K418B合金细晶铸造整体涡轮真空热处理工艺研究

通过力学性能评估和金相组织观察，研究五种热处理制度，两个周期的试验结果，确定了Ｋ４１８Ｂ合金细晶铸造整体涡轮的真空热处理工艺。     

Influence of the surface conditions on permeation in the deuterium–MANET system

The condition of the surfaces is of crucial importance for the deuterium permeation through materials. In this work a study of the surface constants for the adsorption (σk₁) and release (σk₂) of deuterium under different surface conditions on the martensitic steel DIN 1.4914 (MANET) has been carried out. The growth of an oxide surface layer (Cr₂O₃) of about 25–30 nm in a MANET sample, heat treated in an oxidizing environment, compared to the bare MANET that have a ‘natural' oxide of about 5 nm has provoked a reduction of both the permeation rate and the recombination coefficient (about 3 orders of magnitude). In addition, the permeation governing process has changed from diffusion-limited to surface-limited. The measurements of the permeation rate of deuterium were performed by a gas-phase permeation technique over the temperature range 574–746 K and for deuterium driving pressures in the range from 3 to 10⁵ Pa.     

时效处理对 TiNi 合金相变与性能的影响

通过用ＴＥＭ等方法研究热处理制度（固溶处理、时效处理）对ＴｉＮｉ合金相变组织和性能的影响，找出了最佳热处理制度。结果表明，在４５０～５００℃进行时效处理，Ｔｉ－５０．８ａｔ％Ｎｉ的合金出现了大量的Ｔｉ３Ｎｉ４相，且恢复率最高。     

溶胶－凝胶二氧化硅驻极体薄膜的物理化学改性

实验研究了由溶胶－凝胶法制备二氧化硅驻极体薄膜的工艺。用红外透射谱、扫描电子显微镜以及驻极体等温表面电位测量和热刺激放电等实验考察了热处理和化学表面修正两个关键工艺对溶胶－凝胶二氧化硅样品驻极体性能的影响。结果表明经过高温条件下一定时间的热处理和化学表面修正，可以制备出性能优良的驻极体薄膜