采用基于速率的缓存控制的CSFQ算法

在核心无状态公平队列调度(CSFQ)算法的基础上,提出了一种采用基于速率的随机早期检测(RED)机制的核心无状态公平队列调度(rr-CSFQ)算法.在路由器中根据网络拥塞状态和数据流到达速率,采用基于速率的随机早期检测机制进行缓存管理.该算法通过调节早期丢包概率,解决了CSFQ时延较长造成的缓存"丢尾"问题,提高了带宽在不同数据流之间分配的公平性.仿真实验证明,该算法在缓存较小的情况下仍能保证带宽在传输控制协议(TCP)数据流和用户数据报协议(UDP)数据流之间的公平分配.     

The Influence of Nitrogen and Boron Implant into Silicon Substrate on the Phase and Internal Stress of c-BN Films

Cubic boron nitride(c-BN) film was deposited on a Si (100) substrate by the RF-magnetron sputtering.The mainly problems for fabrication of c-BN films are the low purity and high intrinsic compressive stress. In order to solve the two problems, the c-BN film with the buffer interlayer was deposited on the substrate which had been implanted with nitrogen and/or boron ions. The results show: the implantation of nitrogen ions can obviously increase c-BN content and reduce the internal stress slightly; while the implantation of boron shows no obvious improvement to the content of c-BN, which can reduce the internal stress in the film obviously. In addition, it is suggested that the implantation of nitrogen and boron shows the best result, which not only can increase the content of c-BN, but also reduce the internal stress in the c-BN film obviously.     

Dissipation of Turbulent Kinetic Energy near a Bubble Plume

Profiles of the rate of dissipation of turbulent kinetic energy were inferred from temperature microstructure measurements near a bubble plume at the center of a tank with diameter of 13.7 m and maximum depth of 8.3 m. Six sets of between 18 and 51 profiles were collected at airflow rates of 0.1–0.6 L/s, measured at atmospheric pressure, and ensemble-averaged dissipation profiles were calculated. The dissipation in all cases was between 10?8 and 10?6?m2/s3 in most of the profile, but it increased sharply near the water surface. Energy considerations are used to discuss the experimental results in terms of previous numerical models of bubble plume turbulence. Two previous numerical studies show that the turbulence dissipates between 15 and 30% of the available power. In the experiments, the fraction is less than 1% because some of the energy of the plume is used to generate waves on the water surface and the profiles used to compute the volume-averaged dissipation were relatively far from the bubble plume.     

Design and Hydraulics of a Combined Storm Overflow Structure

Storm overflow structures in combined sewers are used to separate sewage from storm water. For subcritical approach flow, sideweirs are currently used; however, they often behave hydraulically poor. This study was conducted to explore a combined storm overflow structure able to improve the hydraulic performance of sewer sideweirs. Such a structure consists of a low-crested sideweir and a bottom opening just downstream from the sideweir end. First, the hydraulic design procedure is described, and then, based on laboratory experiments and by using the governing flow equations, the main hydraulic features are highlighted. The results indicate that the proposed device has advantageous characteristics in terms of hydraulic efficiency, reliability, and maintenance.     

Fabrication of NiO Buffer Layer for YBCO Coated Conductors by Combining Sputtering and SOE Method

In research of YBCO coated conductors, the development of a oxide template for epitaxial growth of YBCO is very important. Matsumoto et al have demonstrated the potential of the surface oxidation epitaxial (SOE) route for formation a cube textured NiO layer on nickel tapes. The epitaxial NiO functions as a buffer layer of chemical reaction between YBCO and nickel, and as a template for the epitaxial growth of YBCO. However, the surface quality of NiO is difficult to control and defects such as crack, spall and deep grooves exist in SOE NiO layer. A new approach combining sputtering and SOE method to obtain crack-free and cube textured NiO layer were reported. Ni tapes prepared by the combination of rolling and recrystallization were used for this work. A coating of Ni was first deposited on the tapes via magnetron sputtering. Then on the coating tapes, continuous and textured NiO layer were achieved by SOE technology.     

Effects of tilt on high-resolution ADF-STEM imaging

A study of the effects of small-angle specimen tilt on high-resolution annular dark field images was carried out for scanning transmission electron microscopes with uncorrected and aberration-corrected probes using multislice simulations. The results indicate that even in the cases of specimen tilts of the order of 1 degree a factor of 2 reduction in the contrast of the high-resolution image should be expected. The effect holds for different orientations of the crystal. Calculations also indicate that as the tilted specimen gets thicker the contrast reduction increases. Images simulated with a low-angle annular dark field detector show that tilt effects are more pronounced in this case and suggest that these low-angle detectors can be used to correct specimen tilt during scanning transmission electron microscopes operation.     

Optical and thermal processes involved in ultrafast laser pulse interaction with a field emitter

In the interaction between ultrafast laser pulses and a field emitter both optical and thermal processes are involved. In this paper, these physical process, and their timescales, are experimentally explored. Simple models are proposed to explain the observed experimental behaviour, and the influence of various parameters are investigated. In the case of optical processes, it is shown that the optical field is greatly enhanced at the tip apex, and that field evaporation could be induced by an optical non-linear effect called optical rectification. In the case of thermal processes, it is shown that the temperature rise because of light absorption can be determined and that the cooling process of the tip surface can be studied by pump probe measurements.     

Improved single neuron controller for multivariable stochastic systems with non-Gaussianities and unmodeled dynamics

In this paper, a new adaptive control approach is presented for multivariate nonlinear non-Gaussian systems with unknown models. A more general and systematic statistical measure, called (h,?)$(h,?)$-entropy, is adopted here to characterize the uncertainty of the considered systems. By using the “sliding window” technique, the non-parameter estimate of the (h,?)$(h,?)$-entropy is formulated. Then, the improved neuron based controllers are developed for multivariate nonlinear non-Gaussian systems by minimizing the entropies of the tracking errors in closed loops. The condition to guarantee the strictly decreasing entropy of tracking error is presented. Moreover, the convergence in the mean-square sense has been analyzed for all the weights in the neural controllers. Finally, the comparative simulation results are presented to show that the performance of the proposed algorithm is superior to that of PID control strategy.     

H∞ filtering for a class of discrete-time singular Markovian jump systems with time-varying delays

The problem of _H∞$H_{\infty }$ filtering for a class of discrete-time singular Markovian jump systems with time-varying delays is investigated in this paper. The transition probabilities under consideration are time-varying, i.e., Markovian chain is nonhomogeneous. By using the Lyapunov functional approach and reciprocally convex technique, a less conservative delay-dependent bounded real lemma is developed in terms of linear matrix inequalities. Moreover, a sufficient condition for the existence of the desired filter which guarantees the stochastic admissibility and the _H∞$H_{\infty }$ performance index of the resulting filtering error system is presented. Numerical examples are employed to show the usefulness of the proposed results.     

生产线缓冲区容量优化配置:案例研究

生产线缓冲区容量的配置是影响系统性能指标的重要因素之一。这里采用具有阻塞的开排队网络模型研究生产线缓冲区容量的优化配置问题,编制了该模型的一种近似解法——分解算法的应用程序以及仿真程序,并结合工厂的生产实例,探讨了该生产线缓冲区的分配方案,对提高生产效益有一定的指导意义。