场地受限条件下大跨度门式 启闭机安装实例

通过对特定的门式启闭机安装场地条件进行实地考查,列出了场地条件对其安装作业存在的不利因素。在分析研究了由于场地存在的不利因素对门式启闭机安装造成的难题后,有针对性地制定了安装技术措施,从而保证了安装作业过程安全、实施顺利。本文可供类似场地条件的门式启闭机安装施工作业参考。     

水利水电工程工地试验室的建设与管理

结合新疆吉林台一级水电站大坝工程工地试验室建设管理的实践,总结阐述了水利水电工程工地试验室建设管理的一般程式和要求,归纳列举了工地试验管理中一些带有普遍性的常见问题及处理方法,供交流探讨.     

缅甸敏达水电站厂房设计

结合缅甸敏达水电站地形地质条件,从厂址比选、开关站型式比选和厂房布置等几个方面介绍了该水电站厂房设计的基本思路及设计要点。     

岔溪河一级水电站坝址比选设计

岔溪河一级水电站为岔溪河干流上水电开发的第一个梯级电站,为岔溪河水电开发的龙头水库。岔溪河一级水电站上坝址选择混凝土面板堆石坝作为代表坝型,下坝址选择细石混凝土砌石重力坝作为代表坝型。     

庄里水库坝址及坝轴线方案比选

水库工程大坝坝址坝轴线的选择,是项目可行性研究阶段的主要研究课题,在满足规划指标及枢纽布置等条件下,还应充分考虑工程地质条件、施工工期、移民拆迁占地、环境影响、工程投资、工程效益等方面,最终选择技术可行、经济合理、效益最佳的方案作为推荐方案。所介绍的山东省庄里水库,在开展前期工作过程中,由于存在复杂的地质情况及移民拆迁占地问题,在坝址坝轴线的比选工作上经历了项目建议书及可行性研究两个阶段,勘察设计时间长达5a之久,最终确定上坝轴线为推荐方案。     

基于B/S架构的教学设备管理系统的实现

随着计算机网络的进一步普及,已为浏览器访问奠定了夯实的基础。各二级学院管理员只需像平时通过浏览器访问网站一样,按主管部门提供的网址和账户就能使用教学设备管理系统。针对我校的实际需求及市售教学管理软件存在的不足之处,利用A SP.NET技术,设计符合我校实际需求的基于B/S架构的教学设备管理系统。     

Residual strength prediction of multiple cracked stiffened panels

Prediction of the coalescence of adjacent cracks is critical for residual strength estimation of structures under multiple site damage conditions. A methodology successfully developed for the case of crack link‐up prediction of un‐stiffened plates, is extended for the case of typical cracked stiffened aircraft panels. The proposed link‐up criterion is based on the change in the magnitudes of elastic and plastic strain energies of the stiffened panel, before and after the cracks coalesce. The strain energy magnitudes of interest are calculated using non‐linear elastic–plastic finite‐element analysis. For the application and verification of the method, experimental results from the open literature are used. Residual strength values calculated by the proposed methodology are in good agreement with the experimental results. The present criterion provides superior results when compared to the existing and commonly applied link‐up criteria.     

核电厂选址放射性后果分析的几个问题

厂址安全、环境保护和应急准备是评价核电厂厂址适宜性主要关注的3个方面.本文概述了核电厂选址法规的基本要求,以及目前核电厂选址放射性后果分析中存在的问题,对选址阶段放射性后果审查中应当注意的几个问题进行了讨论.     

The Nature of Struck-by Accidents

Construction accidents are broadly categorized into five basic groups, namely falls (from elevation), shock (electrical), caught in/between, struck-by, and other. “Struck-by” accidents accounted for 22% of all construction-related fatalities recorded by the Occupational Safety and Health Administration between 1985 and 1989. Recent (1997 to 2000) data show that the percentage of struck-by accidents constituted 24.6% of the fatalities and serious construction worker injuries. Struck-by accidents primarily involve workers struck by equipment, private vehicles, falling materials, vertically hoisted materials, horizontally transported materials, and trench cave ins. Determining possible causation factors of these accident types is often difficult, due to the broad categories utilized in the accident coding system. This study resulted in gaining insights about the root causes of the struck-by injuries. By finding the root causes, effective methods for accident prevention can be developed.     

江西省科技馆楼宇设备自动化系统设计概述

结合江西省科学技术馆楼宇设备自动化系统设计,阐述楼宇设备自动化系统基本概念及设计方法。