高压电网双母线接线断路器失灵保护回路设计分析与改进

论述了高压电网断路器失灵保护的原理和基本组成,就目前双母线接线的断路器失灵保护的回路设计和存在的问题进行了分析。同时根据国网公司新颁布的高压保护装置标准化设计规范,阐述了双母线接线的失灵保护回路的设计技术改进方案。     

大型方孔型材挤压模设计

介绍了挤压型材截面呈方形的大型方孔型材挤压模的设计原理、设计过程及其优化设计。     

Solid circulation and gas bypassing characteristics in a square internally circulating fluidized bed with draft tube

The effects of gas velocities to draft tube (26.64–52.54 cm/s) and to annulus section (8.14–11.84 cm/s) on solid circulation rate and gas bypassing fractions were determined in a square internally circulating fluidized bed reactor with an orifice-type square draft tube. The solid circulation rate and gas bypassing fraction from the annulus section to the draft tube increase but gas bypassing fraction from the draft tube to the annulus section decreases with increasing gas velocity to the draft tube. With increasing gas velocity to the annulus section, the solid circulation rate and gas bypassing fraction from the draft tube to the annulus section increase but, gas bypassing fraction from the annulus section to the draft tube decreases. The solids circulation rate was correlated with the pressure drop across the orifice and the opening area ratio based on the orifice theory. The gas bypassing fraction was correlated with gas velocities to the fluidized and the moving beds. Based on the gas bypassing fraction data, the gas flow rates across the orifice were correlated with gas velocities to the fluidized and the moving beds, opening area ratio, particle size and solids height in the bed.     

封闭式制冷系统旁通调节的研究

对制冷系统制冷量调节原理以及热蒸气旁通方式的缺陷进行分析,提出了用低温湿蒸气旁通和饱和蒸气旁通的方法改进制冷系统。     

聚合物热光可变光衰减器

提出一种旁路结构聚合物热光可变光衰减器 (variable optical attenuator,VOA)的设计 ,采用旁路波导可提高衰减效率并降低串扰 .软件模拟验证 ,无间距旁路 VOA衰减可达 2 8d B,比未加旁路波导的相同结构 VOA增加10 d B,但同时插入损耗增加 0 .3d B,串扰低于 - 4 4 d B,理论功耗为 4 0 m W.采用倒脊形结构研制了原理性的热光聚合物 VOA,测得衰减大于 11d B,相应输入电流为 6 6 m A,具有明显的热光效应 .     

一种低功耗2D DCT/IDCT处理器设计

设计了一种低功耗的2D DCT/IDCT处理器。为了降低功耗,设计基于行列分解的结构,采用了Loeffler的DCT/IDCT快速算法,并使用了零输入旁路、门控时钟、截断处理等技术,在满足设计需求的基础上降低了系统的功耗。常系数乘法器是该处理器的一个重要部件,文中基于并行乘法器结构设计了一种新型的低功耗常系数乘法器,它采用了CSD编码、Wallace Tree乘法算法,结合采用了截断处理、变数校正的优化技术,使得2D DCT/IDCT处理器整体性能有较大提高。设计的时钟频率为100 MHz,可以满足MPEG2 MP@HL实时解码的应用。采用SMIC0.18μm工艺进行综合,该2D DCT/IDCT处理器的面积为341 212μm2,功耗为14.971 mW。通过与其他结构的2DDCT/IDCT处理器设计分析与比较,在满足MPEG2 MP@HL实时解码应用的同时,实现了较低的功耗。     

SOLIDS CIRCULATION IN SPOUTED AND SPOUT-FLUID BEDS WITH DRAFT-TUBES

A 20 cm semi-cylindrical spout-fluid bed with a draft-tube has been used to investigate the effect of various physical parameters on the solids circulation rate, A new method has been developed by which these data can be easily and accurately collected. Equations are presented which can be used to predict the maximum attainable solids circulation rate and the spouting velocity required to achieve this maximum for the unit operating in spouting mode. The circulation trends are shown to be a direct result of the phenomena of entrainment and jetting occurring in the entrainment zone investigated visually with a video camera. Preliminary gas bypassing experiments were also performed which show the ability to almost eliminate spout gas bypassing to the annulus with appropriate auxiliary gas addition.