水轮机调速器现代调节技术及选型

对目前比较先进的微机调速器的两种系统结构进行了分析，并对微机调节的控制策略和调节参数的设置及系统配置等作了介绍，并提出了对凋速器技术性能的评价标准和调速器选型时的突出问题，可为实际应用提供参考。     

Putting it all together – Formal verification of the VAMP

In the verified architecture microprocessor (VAMP) project we have designed, functionally verified, and synthesized a processor with full DLX instruction set, delayed branch, Tomasulo scheduler, maskable nested precise interrupts, pipelined fully IEEE compatible dual precision floating point unit with variable latency, and separate instruction and data caches. The verification has been carried out in the theorem proving system PVS. The processor has been implemented on a Xilinx FPGA. A shorter version of this article with the title “Instantiating uninterpreted functional units and memory system: functional verification of the VAMP” appeared in [8]. The work reported here was done while all the authors were with Saarland University.     

A hybrid extended finite element/level set method for modeling phase transformations

A hybrid numerical method for modelling the evolution of sharp phase interfaces on fixed grids is presented. We focus attention on two‐dimensional solidification problems, where the temperature field evolves according to classical heat conduction in two subdomains separated by a moving freezing front. The enrichment strategies of the eXtended Finite Element Method (X‐FEM) are employed to represent the jump in the temperature gradient that governs the velocity of the phase boundary. A new approach with the X‐FEM is suggested for this class of problems whereby the partition of unity is constructed with C¹(Ω) polynomials and enriched with a C⁰(Ω) function. This approach leads to jumps in temperature gradient occurring only at the phase boundary, and is shown to significantly improve estimates for the front velocity. Temporal derivatives of the temperature field in the vicinity of the phase front are obtained with a projection that employs discontinuous enrichment. In conjunction with a finer finite difference grid, the Level Set method is used to represent the evolution of the phase interface. An iterative procedure is adopted to satisfy the constraints on the temperature field on the phase boundary. The robustness and utility of the method is demonstrated with several benchmark problems of phase transformation. Copyright © 2002 John Wiley & Sons, Ltd.     

Hybrid LES — Review and assessment

In the late eighties and up to the beginning of nineties computation of turbulent flows is mostly dominated by RANS (Reynolds Averaged Navier-Stokes Simulation) type modelling. During the last few years URANS (Unsteady RANS) and LES (Large Eddy Simulation) type of approaches have been attempted with some success. Yet, there have been many difficulties when LES is applied to practical engineering problems and to high Reynolds number flows as energy dissipating eddies become really small and mesh resolution required for a reasonably resolved LES approaches that of DNS (Direct Numerical Simulation). An alternative solution suggested was to combine RANS and LES, which in general referred to as Hybrid LES. There have been many proposals for combining RANS and LES in different ways. In this article, some of the issues involved in performing hybrid LES reported in the recent literature is briefly reviewed.     

Determining stress intensity factors of composites using crack opening displacement

The main purpose of this paper is to find the mixed-mode stress intensity factors of composite materials using the crack opening displacement (COD). First, a series solution of the composite material with a crack was used to evaluate COD values. Then, the least-squares method was used to calculate mixed-mode stress intensity factors. This algorithm can be applied to any method that generates or measures COD values. The major advantage of this method is that COD values very near the crack tip are not necessary. Both finite element simulations and laboratory experiments were applied to validate this least-squares method with acceptable accuracy if the even terms of the series solution are removed.     

Influence of Ni Interlayers on the Mechanical Properties of Ti6Al4V/(WC-Co) Friction Welds

Ni interlayers were introduced prior to dissimilar friction welding of Ti6Al4V base material to three cemented carbide substrates. The fracture strength of Ti6Al4V/(WC-6 wt% Co) welds were poor and were markedly improved when 20-µm thick Ni interlayers were introduced prior to dissimilar friction welding. These results were only produced when the (WC-6 wt% Co) cermet was electroplated prior to friction welding. When the Ti6Al4V alloy was electroplated prior to friction welding, fractured WC particles and cracking were observed in the (WC-Co) carbide substrate. The fracture strengths of Ti6Al4V/(WC-11 wt% Co) and Ti6Al4V/(WC-24 wt% Co) welds were not improved when 20-µm thick Ni interlayers were introduced prior to friction welding. During mechanical testing, the Ni layer retained at the dissimilar joint interface created a region of weakness.     

单片机软件模拟SPI接口的解决方案

SPI接口是一种同步串行通讯接口，具备SPI接口的外围芯片十分丰富，应用非常广泛。但是，具备SPI接口的单片机种类较少。介绍了一种基于单片机的模拟SPI接口的方法，使没有SPI接口的单片机扩展带有SPI接口的外围芯片成为现实。     

Polarity control of GaN epilayers grown on ZnO templates

We report the successful growth of Ga-polar GaN epilayers on O-polar ZnO templates pre-deposited on c-sapphire. Prior to GaN growth, NH₃ is exposed onto the ZnO template. The polarity of the GaN layers is confirmed by etching of the surface and by conversion beam electron diffraction (CBED), while the O-polar ZnO is confirmed by CBED. It is suggested that the NH₃ pre-exposure helps form a Zn₃N₂ layer, which possesses inversion symmetry and inverts the crystal from anion polar to cation polar.     

TPS/TDC3000系统串口通讯的规划与应用

针对TPS/TDC30 0 0系统串口通讯方式、机理进行了一般性的介绍 ,对规划与应用中常见的的问题 ,根据实际工程应用经验提出了解决方案。     

基于人文关怀的信号配时方法研究

在传统的信号配时中，都是以减少车辆的总延误为目标，这样并不能很好地体现出整个社会中人的时间价值。现以减少所有通过交叉口的出行者的总延误为目标，在传统的信号配时方案的基础上，提出了一套新的配时方案，同时以减少全部出行者的总延误时间为目标给出了相应的延误评价公式，最后以杭州市文一路-古翠路口的实测交通数据进行分析，论证了本配时方案的有效性。