基于动态模式分解的移动用户信道容量预测算法

在多输入多输出环境下,为了能够连续预测出移动用户的信道容量并以此合理地分配用户资源,提出了一种基于动态模式分解（DMD）的信道容量预测方法及其优化方法：基于经验模态分解的选择性归一化动态模式分解（ESN-DMD）.仿真结果表明,DMD算法只适用于预测低移速低复杂度的用户信号,ESN-DMD算法可以预测不同移速的用户信道容量.     

Effect of equal channel angular extrusion on the microstructure and superplasticity of an Al-Li alloy

This research investigates the use of equal channel angular extrusion (ECAE) processing to produce a superplastic form of the aluminum alloy 2098. The starting material was a hot-rolled and precipitation-hardened plate with elongated grains of width 67–92 μm, and a composition in weight percent of 2.2% Li, 1.3% Cu, 0.73% Mg, 0.05% Zr, balance Al. Microstructural evolution was investigated with optical and transmission electron microscopy (TEM) and microhardness measurements after each step of a multipass ECAE process. ECAE produced a submicron grain structure with an average size of about 0.5 μm. The sub-grain microstructure size was a function of the magnitude of the input strain and the extrusion temperature. Misorientation angles of the developed submicron structure increase with increasing number of passes at warm working temperatures. Superplastic behavior of the ECAE-processed alloy was achieved. However, the low zirconium content of the 2098 alloy resulted in grain growth of the refined structure at the superplastic processing temperatures, placing a lower limit on the deformation rates that can be used.     

变流场情景下基于鱼类游泳特性的上溯通道分析

水电开发对洄游性鱼类的生境造成了影响,预测目标鱼类洄游期的上溯通道可为修建过鱼设施提供依据,从而减缓其负面效应。本文选取虎渡溪航电工程的下游河段作为研究区域,将长薄鳅、白甲鱼、异鳔鳅鮀作为目标鱼类,针对几种目标鱼类的游泳能力对不同流速进行分区后,得出了适用于多种过鱼目标的流速适宜度曲线,然后对研究区域过鱼期的典型流量进行了数值模拟。根据流速适宜度曲线对研究区域的多种过鱼目标进行了流速适宜度评价,并由评价结果预测了满足多目标过鱼要求的上溯通道。结果表明：流速适宜度评价最优区域出现的位置随流量变化而有所不同,低流量运行条件下出现在主流区域,而高流量运行条件下出现在主流区域两侧;上溯的通道面积占总面积的比例也随流量变化而有所不同,低流量运行条件下的占比约为高流量运行条件下的3 ~ 4倍。根据预测通道特征,对鱼道的进口布置及电站运行调度提供了建议。该结果可为相关鱼类的保护工作提供依据。     

TRPM7-Mediated Calcium Transport in HAT-7 Ameloblasts

TRPM7 plays an important role in cellular Ca²⁺, Zn²⁺ and Mg²⁺ homeostasis. TRPM7 channels are abundantly expressed in ameloblasts and, in the absence of TRPM7, dental enamel is hypomineralized. The potential role of TRPM7 channels in Ca²⁺ transport during amelogenesis was investigated in the HAT-7 rat ameloblast cell line. The cells showed strong TRPM7 mRNA and protein expression. Characteristic TRPM7 transmembrane currents were observed, which increased in the absence of intracellular Mg²⁺ ([Mg²⁺]_i), were reduced by elevated [Mg²⁺]_i, and were inhibited by the TRPM7 inhibitors NS8593 and FTY720. Mibefradil evoked similar currents, which were suppressed by elevated [Mg²⁺]_i, reducing extracellular pH stimulated transmembrane currents, which were inhibited by FTY720. Naltriben and mibefradil both evoked Ca²⁺ influx, which was further enhanced by the acidic intracellular conditions. The SOCE inhibitor BTP2 blocked Ca²⁺ entry induced by naltriben but not by mibefradil. Thus, in HAT-7 cells, TRPM7 may serves both as a potential modulator of Orai-dependent Ca²⁺ uptake and as an independent Ca²⁺ entry pathway sensitive to pH. Therefore, TRPM7 may contribute directly to transepithelial Ca²⁺ transport in amelogenesis.     

纯铝等径角挤技术（I）——显微组织演化

研究了纯铝在 3种 (A、B和C)不同等径角挤工艺中的显微组织演化。结果表明 :纯铝经过等径角挤压变形后 ,其显微组织特征与加工路线有很大的关系。提出了立方元素扭转模型 ,分析了 3种不同加工路线的剪切面和剪切方向 ,较好地解释了采用 3种不同路线挤压后材料显微组织的演化规律。在路线C(各道次挤压间试样旋转 180°)中 ,每次挤压样品总是在相同的剪切面上发生剪切 ,每相邻道次之间的剪切方向相反 ,前一次变形产生的剪切应变被随后紧接着的下一次挤压所抵消 ,这导致了多余的剪切应变 ;在路线A(各道次挤压间试样不旋转 )中 ,有两个相交成 6 0°的剪切面 ,剪切交替地在两个剪切面上进行 ;在路线B(各道次挤压间试样旋转 90°)中 ,存在 4个不同的剪切面和剪切方向 ,挤压交替地在 4个剪切面上进行 ,X ,Y和Z平面上的晶粒都发生了剪切 ,这有利于等轴晶结构的形成     

Monte-carlo modeling of grain growth in Zr equal channel angular pressed and recrystallized

Grain boundary character distribution in equal-channel-angular pressed Zr was studied. Using a die design of 90°/20° and an operation temperature of 350°C. The initial grain size of 20 μm was reduced to about 270 nm with 4 passes via route B_c. The grain growth kinetics of the recrystallized state was obtained by experiment and Monte-Carlo computer simulation, respectively, which showed good agreement. Based on kinetics and morphological characteristics, it was concluded that the grain coarsening mechanism was governed by normal grain growth. No sign of abnormal grain growth was detected either in the experiment or in simulation despite taking into consideration anisotropy in grain boundary energy as well as its mobility. This indicates that grain boundaries produced by severely deformed Zr are stable against explosive coarsening. The evolution characteristics of the microstructure in the present ECA pressed and recrystallized Zr differed from those of cold rolled Ti in that the grain boundary misorientation distribution and texture were rather stable during grain growth. Jointly Appointed by the Center for Advanced Aerospace Materials This article is based on a presentation made in the 2002 Korea-US symposium on the “Phase Transformations of Nano-Materials,” organized as a special program of the 2002 Annual Meeting of the Korean Institute of Metals and Materials, held at Yonsei University, Seoul, Korea on October 25–26, 2002.     

基于两阶段人工鱼群算法的U型渠道断面优化设计

渠道断面优化是控制农田水利工程成本的重要因素,已有的渠道断面优化研究以梯形渠道为主,对U型渠道研究较少。以优化U型渠道深度、圆弧半径和直线段外倾角为目标,建立以U型渠道过水断面面积最小为目标函数、满足设计流量要求的数学优化模型。根据U型渠道水力计算的复杂性,利用引入协调行为的两阶段人工鱼群算法,对渠道断面设计进行优化。优化结果满足边坡稳定等约束条件。将模型应用于连云港市赣榆区黑林镇土地整理项目,10条斗渠过水断面面积均减小,优化后占地面积共减少28.603 m~2,占原占地面积的5.0%。     

含水量对渠道保温板保温耐久性的影响及保温板厚度设计

北方渠道大多使用保温板防止混凝土衬砌受冻胀破坏。在计算保温板厚度时为了降低成本,容易忽略保温板使用过程中受各种因素的影响导致保温效果变差的情况,使混凝土衬砌达不到设计使用年限便提前被破坏。内蒙古河套灌区试验结果表明,由于受酸雨、冻融作用、含水量等因素的影响,保温板保温效果平均每年降低0.9℃,其中受含水量变化的影响最大。经试验测得:聚苯乙烯保温板(EPS)含水量每增加1%,会导致导热系数增大5%。基于多层材料串联热阻叠加原理和热阻等效原理,对保温板厚度计算公式进行完善,并提出相应的铺设方法和施工技术要求。该设计对保温板在季节性冻土区的推广应用具有一定参考价值。     

入海水道二期对洪泽湖地区洪水风险的影响研究

为探究淮河入海水道二期工程对洪泽湖的泄洪能力以及周边滞洪区的影响,在对研究区河网概化及地形处理的基础上,建立了研究区河网一维、洪泽湖湖区与周边滞洪区二维耦合的水动力数值模型,并采用1991,2003,2006,2007四年实测历史洪水资料对模型进行率定及验证。基于现状工况、规划工况以及不同洪水量级,设计了5个对比方案对研究区进行洪水演进数值模拟,对不同洪水量级进行横向对比,对不同工况进行纵向对比,并对不同方案进行淹没面积分析和洪水影响分析。结果表明,入海水道二期工程的启用可以有效降低洪泽湖水位,提高洪泽湖的防洪标准和周边滞洪区的启用标准,减少同等洪水量级下的受影响人口数和区域GDP,为洪泽湖的防洪安全建设以及周边蓄滞洪区的稳定发展创造了条件。     

基于动态朴素贝叶斯分类器的明渠水华风险评估模型

水华风险不仅是水利工程规划时需要考虑的环境问题,也是水利设施运营时不能忽视的监测项目。为了提高明渠水化风险等级预测的准确率,针对水华成因的不确定性和发展的时序性,基于动态朴素贝叶斯网络分类器提出一种应用于明渠的水华风险评估模型。模型用水华风险等级结点对应藻叶绿素a(Chla)的浓度,并考虑了9项影响水藻生长的因素。采用主成分分析法,处理专家咨询结果,进行参数的设计。在苏州河道北门桥2011年6月初至9月初观测的53例连续监测数据上,与基于朴素贝叶斯网络分类器的评估模型进行比较实验。混淆矩阵显示对中等风险情况的预测识别率提高了15.625%,单尾配对t检验表明在显著性水平0.05时,两模型预测识别率差异显著。考虑了时序特征的基于动态贝叶斯网络分类器的评估模型对明渠中等水化风险的预测识别率提高显著。