Increasing testing productivity and software quality: A comparison of software testing methodologies within NASA

Pressure to compress the development life cycle and reduce the duration and resources committed to testing lead to experimentation in testing at the NASA Goddard Space Flight Centerís Software Engineering Laboratory. This study investigates the trend to reduce developer testing and increasingly rely upon inspection techniques and independent functional testing to shorten the development life cycle, improve testing productivity, and improve software quality.An approach is developed to conduct this comparison. In particular, the problem faced by software researchers, having a comprehensive characterization of software projects so similar types may be identified for comparative studies, is addressed using expert opinion.     

Use of electron microscopy on microstructure characterization of high chromium cast irons

The physical metallurgy underlying the development of cast microstructures in abrasion resistant high chromium cast irons, and their structural modification by thermal treatments is relatively complex. Structural characterisation via electron microscopy therefore has a key role to play in furthering our understanding of the phase transformations that control the microstructures and hence the service performances of these irons as wear parts. This paper shows how both scanning and especially transmission electron microscopy can provide valuable information on the nature of eutectic and secondary carbides and on the matrix structures in these irons. Particular attention is given to current characterisation research on conventionally cast 30%Cr irons that are used for applications involving corrosive wear e.g. slurry pumps and on a semi-solid cast 27%Cr iron that has a potential for applications in industry.     

Preparation and properties of nanosize MnZn ferrite from δ-FeOOH

Ferrous ion was transformed into feroxyhyte (δ-FeOOH) by oxidation. Then, manganese sulfate and zinc sulfate in some ratio were added to the feroxyhyte solution. The co-precipitation was boiling reflux conditions sometime under constant stirring. The nanosize MnZn ferrite powder was formed. The mechanism of preparation of the nanosize MnZn ferrite was discussed, and the formation of feroxyhyte which was playing a key role during the process was mentioned. The properties of powder was tested by means of X-ray diffraction, transmission electron microscopy and vibrating sample magnetometer. The results show that the samples of spherical particles about 20 nm, which have characteristics of ferrimagnetism, has larger saturation magnetization, but the remanent magnetization and coercivity are comparatively smaller. The spinel MnZn ferrite nanosize powder was successfully prepared from δ-FeOOH at low temperature, with low-carbon steel and peroxide as main material.     

tau: A 1D radiative transfer code for transmission spectroscopy of extrasolar planet atmospheres

The tau code is a 1D line-by-line radiative transfer code, which is generally applicable for modeling transmission spectra of close-in extrasolar planets. The inputs are the assumed temperature–pressure profile of the planetary atmosphere, the continuum absorption coefficients and the absorption cross-sections for the trace molecular absorbers present in the model, as well as the fundamental system parameters taken from the published literature. The program then calculates the optical path through the planetary atmosphere of the radiation from the host star, and quantifies the absorption due to the modeled composition in a transmission spectrum of transit depth as a function of wavelength. The code is written in C++, parallelized using OpenMP, and is available for public download and use from http://www.ucl.ac.uk/exoplanets/.     

硫醇自组装膜的电化学研究进展

综述了在金电极上硫醇自组装膜的电化学表征方法，性质和应用，介绍了自组装膜上的电子传递机理，并进行了简要的展望。     

A free space frequency‐time‐domain technique for electromagnetic characterization of materials using reflection‐based measurement

In this report, a free space frequency‐time‐domain technique is presented for characterizing the electrical properties and thickness of the sample using multiple reflections and fabry‐perot resonance phenomenon. The retrieval of constitutive electromagnetic parameters of the sample has been carried out by comparing the measured reflection coefficient data from the sample at two different incident angles. The relative permittivity as well as relative permeability along with the thickness of different samples viz., beryllia, silicon, and plexiglass have been evaluated with high accuracy in the frequency range 1 to 15 GHz. The method is also experimentally validated by successfully reconstructing the unknown material properties of two different samples. The unique advantage of this method lies in non‐requirement of any prior knowledge of the sample's thickness for measuring the complex relative dielectric constant as well as relative permeability of the sample. To determine the electromagnetic properties of the sample, the sole knowledge of reflection coefficient data are needed. Moreover, the method does not involve any additional measurement for the reference calibration. The simple, cost‐effective proposed scheme is quite useful in many applications like accurate determination of signal strength in indoor wireless communication, through wall imaging, food industry, and so on.     

Sparkle measurement revisited: A closer look at the details

Four years after introduction of the first instrument for measurement of sparkle, the foundations have been reconsidered, and the pool of practical experience has been analyzed to provide a more detailed and complete picture of the subject matter. The following aspects are introduced and discussed: observation conditions and resulting requirements for imaging (sampling) and filtering, analysis of spatial periods and frequencies as a basis for filtering, spatial filtering concepts, sparkle in the frequency domain, sparkle evaluation based on analysis of single images and difference images, origins of unwanted sparkle components, scaling and offset in sparkle evaluation, and verification of the method.     

NetCluster: A clustering-based framework to analyze internet passive measurements data

Internet measured data collected via passive measurement are analyzed to obtain localization information on nodes by clustering (i.e., grouping together) nodes that exhibit similar network path properties. Since traditional clustering algorithms fail to correctly identify clusters of homogeneous nodes, we propose the NetCluster novel framework, suited to analyze Internet measurement datasets. We show that the proposed framework correctly analyzes synthetically generated traces. Finally, we apply it to real traces collected at the access link of Politecnico di Torino campus LAN and discuss the network characteristics as seen at the vantage point.     

Prototyping and modeling of the centrifugal casting process for paraffin waxes

Centrifugal casting is a technology used for manufacturing hybrid rocket paraffin grains. This technology helps avoiding voids formation inside the solid paraffin as it cools. Voids are formed because of air bubbles being entrapped while pouring and because the liquid wax shrinks by 17–19% upon cooling. In this work, the centrifugal casting process for the manufacturing of paraffin cylinders was prototyped at two different scales considering critical casting issues. The effects of process parameters (rotational speed, melt temperature, and flow rate) on the tensile properties of the manufactured grains were analyzed. The results of the optimization conducted at the lower scale (2.5?kg) were up scaled to manufacture 25?kg grains. The resulting mechanical properties complied with the design specifications, and they were better than those characterized from the gravity cast wax. A numerical model of growth and dissolution of bubbles during the process was then developed to predict the quality of the castings. The numerical results showed how increasing the mold rotational speed up to 1800?rpm reduced the removal time. However, compared to grains solidification time, the predicted removal times were much shorter, proving the advantage of centrifugal casting in counteracting voids formation.