Fracture Resistance of Ceramics upon Edge Chipping

Modern methods of determining fracture resistance are analyzed. The necessity of developing a crucially new method based on edge chipping of a brittle material is shown. The results of experimental studies are presented. The applicability of the method to the comparative fracture resistance evaluation of ceramics is substantiated.     

反应离化团束（RICB）法生长CN硬质薄膜

用反应离化团束（ＲＩＣＢ）法，以低分子量聚乙烯为蒸发材料，氨气为反应气体，在ＮａＣｌ（１００）和Ｓｉ（１００）衬底上淀积Ｃ－Ｎ薄膜，透射电子衍射（ＴＥＭ）分析表明薄膜中含有β－Ｃ３Ｎ４晶粒，Ｘ射线光电子谱（ＸＰＳ）和红外吸收谱（ＩＲ）表明存在Ｃ，Ｎ原子的化学键合。     

图象中心加权中值滤波的改进与应用

中心加权中值滤波具有较好的边缘保持特性及快速实现的特点，但滤噪能力低于其它中值滤波。此文探 讨对中心加权中值滤波的改进方法，提出了中心加权分级实现的思想，使之同时具有边缘保持、快速滤波和噪声去 除的理想效果。     

眼球的自动定位

提出了一种由粗到细自动定位人脸的一个重要特征即眼球圆心的方法，该方法综合运用局部二值化，霍夫变换，像纱聚类，边缘提取等技术，对均匀或非均匀光照下拍摄或戴眼镜的照片都能获得很高的定位精度，适用于处理证件照。     

Edge detection,three-dimensional cell boundary reconstruction and volume and surface area estimation from differential interference contrast images

Three-dimensional (3-D) cell morphology is important for the understanding of cell function and can by quantified in terms of volume and surface area. Differential interference contrast (DIC, or Nomarski) imaging can enable cell edges to be clearly visualized in unstained tissue due to the slight difference in refractive index between aqueous media and cytoplasm. DIC is affected in only one direction - the direction of the optical shear. A 1-D edge detector was used in that direction with a scale length equal to that of an in-focus edge to highlight cell boundaries. By comparison with the signal from the edge detector on an out-of-focus slice, the in-focus slices could be segmented and, after noise suppression, cell outlines obtained. A voxel paradigm was used to calculate cell volume and differential geometry was used for surface area estimation. We applied this approach to obtain 3-D dimensional information by optical sectioning of motile Amoeba proteus.     

脉冲化学沉积非晶态Ni—P合金原子分布函数研究

采用Ｘ射线衍射分析技术，研究了脉冲化学镀非晶态Ｎｉ－Ｐ合金的原子分布和函数，得出其短程有序原子集团的尺度为０．７５４ｎｍ，约为熔体激冷法获得的非晶态Ｎｉ－Ｐ合金短程有序畴的１／２。并利用脉冲化学沉积非晶态合金的微机制择这一结果进行了解释。     

焊接波浪状边缘薄钢带的高上山成型法

介绍了高上山成型法的工艺特点及理论上的可行性和实践中的可靠性，此方法能有效地解决薄钢带波浪状边缘的焊接方面存在的问题。     

金属蒸气法制备聚合物固载Pd－Cu双金属原子簇

为了不使用任何还原剂而获得聚合物固载高分散零价双金属加氢催化剂，利用金属蒸气法制备了３种不同Ｐｄ／Ｃｕ质量比的聚合物固载双金属原子簇。透射电镜（ＴＥＭ）和Ｘ衍射（ＸＲＤ）测定表明，Ｐｄ－Ｃｕ原子簇粒度很小，平均直径小于３．０ｎｍ。Ｘ射线光电子能谱（ＸＰＳ）表明，Ｐｄ和Ｃｕ均为零价态。Ｐｄ－Ｃｕ原子簇在异丙叉加氢反应中具有很高的活性和选择性。这些结果提供了令人信服的证据，即金属蒸气法可用于在聚合物孔穴内直接而温和地置入小的零价金属原子簇，而且这样制备的聚合物固载金属原子簇很适合于催化应用。     

A tolerant approach to reconstruct topology from unorganized trimmed surfaces

Presented in this paper is a topology reconstruction algorithm from a set of unorganized trimmed surfaces. Error-prone small geometric elements are handled to give proper topological information. It gives complete topology to topologically complete models, and it is also tolerant to incomplete models. The proposed algorithm is vertex-based in that clues for topological information are searched from the set of vertices first, not from that of edges.