三元乙丙橡胶卷材在地下防水工程中的应用

地下防水工程既是一项系统工程，又是一项隐蔽工程，如何选择防水材料和控制工程质量显得到关重要。本文结合工程实例，介绍了三元乙丙橡胶卷材在地下防水工程中的应用，分析了三元乙丙卷材的特点，提出了地下水的技术方案，施工操作要求，质量过程控制要点和施工注意项，本文对三元乙丙卷材的工程应用具有指导和借鉴意义。     

工程监理取费偏低,阻碍监理行业发展

工程监理制在我国建筑市场中，对提高工程质量、控制投资效益起着极其重要的作用，目前我国工程监理行业在低取费的条件下，困难重重，只能维持低水平运行。我们应找出存在的差距，采取相应的措施，适当提高监理取费，使监理行业迅速发展壮大。     

The ponding problem on elastic membranes: an analog equation solution

 In this paper, the nonlinear response of elastic membranes with arbitrary shape under partial and full ponding loads has been analyzed. Large deflections are considered, which result from nonlinear kinematic relations. The problem is formulated in terms of the displacements components and the three coupled nonlinear governing equations are solved using the analog equation method (AEM). The membrane may be prestressed either by prescribed boundary displacements or tractions. Using the concept of the analog equation the three coupled nonlinear equations are replaced by three uncoupled Poisson's equations with fictitious sources under the same boundary conditions. Subsequently, the fictitious sources are established using a procedure based on the BEM and the displacement components as well as the stress resultants at any point of the membrane are evaluated from their integral representations. In addition to the geometrical nonlinearity, the ponding problem is itself nonlinear, because the ponding load depends on the deflection surface that it produces. Iterative schemes are developed which converge to the equilibrium state of the membrane under the ponding loads. Several membranes are analyzed which illustrate the method and demonstrate its efficiency and accuracy. The method has all the advantages of the pure BEM, since the discretization and integration is limited only to the boundary. Received 28 July 2001     

三门峡大坝温度观测资料分析

三门峡水利枢纽大坝为混凝土重力坝,原设计选择其溢流坝和安装场坝为重点观测坝段,因此,在施工中埋设了各种观测仪器1000多支。经对1958～1988年气温、坝体混凝土温度、基岩温度及水库水温观测资料分析表明:三门峡大坝温度变化规律虽与一般重力坝不同,但它却比较全面地反映了防洪与径流发电具体运用的特性。     

A novel robust current control approach using adaptive line enhancer for three‐phase current‐source active power filter

An effective system control method is presented for applying a three‐phase current‐source PWM converter with a deadbeat controller to active power filters (APFs). In the shunt‐type configuration, the APF is controlled such that the current drawn by the APF from the utility is equal to the current harmonics and reactive current required for the load. To attain the time‐optimal response of the APF supply current, a two‐dimensional deadbeat control scheme is applied to APF current control. Furthermore, in order to cancel both the delay in the two‐dimensional deadbeat control scheme and the delay in DSP control strategy, an Adaptive Line Enhancer (ALE) is introduced in order to predict the desired value three sampling periods ahead. ALE has another function of bringing robustness to the deadbeat control system. Due to the ALE, settling time is made short in a transient state. On the other hand, total harmonic distortion (THD) of source currents can be minimized compared to the case where ideal identification of the controlled system can be made. The experimental results obtained from the DSP‐based APF are also reported. The compensating ability of this APF is very high in accuracy and responsiveness although the modulation frequency is rather low. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 150(1): 50–61, 2005; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20014     

激光相变硬化性能与工艺参数关系的数学模型

用回归正文分析的方法．建立了中碳结构钢、碳素工具钢和合金结构钢的激光相变硬化性能与工艺参数间关系的数学模型。分析了回归力程的显著性并预测了各硬化指标的精度。     

基于最小截面差的相位展开

相位展开 (PhU)问题从理论上讲是一个不适定问题。根据被测物理量的整体连续性 ,提出了一种基于最小截面差的相位展开方法。理论分析和对实验条纹图的处理结果表明 ,该方法特别适合于具有相位间断大于π ,条纹欠采样及随机噪声等条纹图的相位展开。同支切 (Branchcuts)法相比 ,该方法具有算法简单、计算量小且可靠度高的特点 ,具有一定的实用性。     

改进的FD—TD法分析二维理想导体TM近区散射问题

本文针对一般ＦＤ－ＴＤ方法分析计算二维理想导体散射问题所遇到散射体边角处难以精确处理的缺点进行了改进。将边角处总场近似解析解直接引入ＦＤ－ＴＤ法差分公式，得到了有关修正系数，为了检验此方法的有效性，有无限长导体方柱为例分别用一般ＦＤ－ＴＤ法和本文的ＦＤ－ＴＤ方法进行了分析研究，并与ＭＯＭ法进行了比较，所得结果说明改进后的ＦＤ－ＴＤ方法对分析计算导体边角附近电流分布特性是较有效的。     

加氢裂化反应器新型冷氢箱的研究与工程设计

报道了加氢加化反应器新型旋流式冷氢箱的研究设计及实用效果，催化剂床层径向温差不大于5℃。