计量秤在变角度状态的实践

介绍了物料计量秤在变角度下如何计算重量，以及变角度显示仪的工作原理和在实际中的运用。     

牙轮钻头压力补偿系统的发展

钻头轴承的寿命不仅取决于轴承材质，更取决于工作环境。密封圈的作用是将泥浆隔离在轴承腔之外，使轴承能工作在一个良好环境中。轴承失效的主要原因是密封圈先期失效，密封圈失效除其自身质量外，主要与密封圈两侧的压差有关，过大的压差是造成密封圈失效的主要原因。介绍了减小压差的压力补偿系统结构的发展。     

矿用圆环链弯曲点的角度分布

矿用圆环链弯曲点是应力集中点 ,肩部断裂发生于该点附近 .以 2 6× 92矿用圆环链为研究对象 ,应用方向数据统计导出该点的角度分布 ,并给出了批量检验矿用圆环链尺寸匹配状况的一种方法     

Quantitative evaluation of generator power control effect of FACTS controllers for power system stabilization

The advancement of power electronics technologies has significantly developed the power system stabilizing controllers. Quantitative as well as qualitative evaluation of their effectiveness in power systems is a matter of great importance for the feasibility investigation of these apparatus. In this paper, the possible control region of FACTS controllers with series and/or shunt configuration in a single machine to infinite bus system is formulated in the powerangle curve with a set of algebraic equations. The effectiveness of TCPST (Thyristor‐Controlled Phase Shifting Transformer), SSSC (Static Synchronous Series Compensator), and TCSC (Thyristor‐Controlled Series Compensator) for the improvement of the transient stability is evaluated quantitatively as a numerical example. The correctness of the proposed method has been confirmed by analysis based on the electromagnetic transients simulation with a detailed system model. © 2001 Scripta Technica, Electr Eng Jpn, 138(3): 43–51, 2002     

二次混合机改造

南钢烧结厂二次混合机通过降低筒体的仰角、提升筒体的转速,增加了混合料的混匀时间,提高了混合料的造球效率,介绍了设计中各种部件的选型和校核计算,该设备投产后大幅度提高了生产能力。     

利用表面等离子体波共振效应(SPRE)对角度与共振波长关系的研究

本文利用了Kretchmann模型的表面等离子体波共振效应，研究了共振波长对入射角变化的敏感性，从而为研制一种新的角度传感器提供了依据。     

T8钢—聚有机硅氧烷仿生减粘降阻复合涂层的特性

研究了Ｔ８钢－聚有机硅氧烷仿生减粘降阻复合涂层的表面润湿性，磨料磨损性及土壤的减粘降组性能，与金属材料相比，仿生复合涂层的表面憎水性显著提高，水在其表面上的接触角达９２°；与４５钢相比，其磨料磨损的体积相对耐磨系数为６３％，降阻率达１５．２２％－－２２．２７％。     

Estimation of true dihedral angles and relative grain boundary energies in polycrystals using the disector

Relative grain boundary energies can be simply related to true dihedral angles, which are the angles between grain boundary planes meeting at triple edges in polycrystals. Some limited efforts in the measurement of true dihedral angles have used the technique of serial sectioning, which is usually cumbersome and time consuming. In this study the three‐dimensional probe called the ‘disector’ has been employed to evaluate true dihedral angles. This probe, combined with automated image processing, introduces precision as well as efficiency, overcomes the disadvantages of the two‐dimensional probe and is far less tedious and less complicated than serial sectioning. It is shown that the technique is relatively simple and therefore can be applied to obtain a significantly large and accurate statistical sample of true dihedral angles. The application of this method is demonstrated by evaluating the triple junction geometry and the associated relative grain boundary energies in polycrystalline 316L austenitic stainless steel.     

Surface designing of polypropylene by critical monitoring of the grafting conditions

The grafting of acrylic acid onto electron beam‐irradiated polypropylene was carried out using preirradiation method. The stability of peroxy radicals was investigated by electron spin resonance. It was found that the decay of peroxy radicals is much faster at 70°C than at 40°C and ambient temperature. The grafting has been observed to be strongly dependent on the monomer dilution in the reaction medium. The grafting was ascertained by attenuated total reflectance (ATR). The distribution of grafts across the samples was monitored by infrared microscopy. It was found that the graft management is considerably influenced by composition of the grafting medium. The grafting involving pure monomer leads to the surface enrichment with the polyacrylic acid chains. The samples grafted in pure monomer led to much lower contact angles as compared to the diluted monomer solution. The swelling of the grafted samples also showed a trend that was governed by the graft management. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 546–553, 2006