倾斜水塔的爆破拆除

针对某部倾斜水塔的定向爆破拆除,从防止水塔倾倒偏移和筒体触地冲击地面对周围环境造成影响等不利情况,确定爆破方案和采取相应的防护措施.     

The optimisation of higher order resampling methods in a multiprocessor environment

The processing of images obtained from satellites often involves highly repetitive calculations on very large amounts of data. This processing is extremely time consuming when these calculations are performed on sequential machines. Parallel computers are well suited to handling computationally expensive operations such as higher order interpolations on large data sets. This paper decribes work undertaken to develop parallel implementations of a set of resampling procedures on an Alliant VFX/4. Each resampling procedure implemented has been optimised in three stages. First, the algorithm has been restructured, where two-dimensional resampling is performed by two one-dimensional resampling operations. Second, each procedure has been reprogrammed in such a way that the autoparallelisation provided by the FX/Fortran compiler has been exploited. Thirdly, data dependent analysis of each procedure has been performed in order to achieve full optimization of each procedure; each procedure has been restructured where appropriate to circumvent vectorisation and concurrency inhibiting data dependencies. The nature and extent of the code optimization achieved for each procedure is presented in this paper. The original code for the most computationally expensive procedure, as targeted at a sequential machine, was found to have an execution time of 4900 seconds on the Alliant VFX/4 when compiled with regular compiler optimization options. Following algorithmic redesigning and reprogramming of the code, as indicated in stage 1 and stage 2, the execution time was reduced to 248 seconds. Restructuring of the code following data dependency analysis indicated in stage 3 in order to avoid data dependencies and allow concurrency and vectorisation, further reduced execution time to 162 seconds. The consequence of this work is that higher-order resampling methods which had not previous been practical are now routinely performed on the Alliant VFX/4 at the University of Dundee.     

结构强度储备的评估及结构维修过程的跟踪决策

本文提出了已建成结构在服役过程中构件的强度储备比和结构整体的强度储备比的概念和定义,它们都是随结构使用和维修过程而变化的时间的函数。我们建议以实际的强度储备比作为构件和结构服役安全度的表达方式,给出了构件和结构强度储备比的具体评定方法,并以结构整体的强度储备比作为控制参数决策结构的维修过程,以求得结构全寿命维修的优化控制。本文所提出的方法适用于具有良好的结构重分析程序和精密细致的检测手段的工程。一般重要的结构工程,例如核电站、海上结构、航空航天设备等均具备上述条件。因而本文所提的方法非常实用,可以立即应用于重要的工程项目,具有重大的经济和社会效益。     

章江水闸安全论证

结合江西赣州章江水闸安全鉴定工作,阐明了水闸安全鉴定基本内容和方法,并参照有关规范和标准作出了安全分析评价.     

钢筋混凝土烟囱有井架整体爬模施工技术

本文主要 根 据三 明 钢铁 厂130m~2 烧 结机 改造 工 程 60m 和 100m 烟 囱 的施 工实 例 ,详 细介 绍 了钢 筋 混凝 土烟 囱 有井架 整 体爬 模的 施 工新 方 法,并 取 得了 良好 的 效果 。     

数据挖掘技术在大坝安全决策支持系统中的应用

数据挖掘技术是一个新兴的，具有广阔应用前景和极富挑战性的研究领域。在充分研究大坝安全决策支持系统的基础上，结合数据挖掘技术的概念与方法等，对数据挖掘技术在大坝安全决策支持系统中的应用进行论述，与此同时，运用数据挖掘技术分析了某大坝垂直位移测值突变的物理成因。     

深基坑施工安全的监测与实例

从明确深基坑施工安全监测的关键出发，确定了监测内容和相关极限报警值，用工程实例进行了阐述。     

电子电气设备的熔断器、断路器保护

熔断器、断路器是电子电气设备最常用的保护电器,熔断器可以实现过载、短路保护,断路器除具上述功能外,还能实行失压保护.根据线路特点和所保护的设备,采取相应的保护设施,确保用电安全.     

土质边坡稳定分析中条分法与有限元法的比较

对比分析了土质边坡稳定性计算中条分法和有限元法的特点，讨论了在有限元法中边坡稳定系数的计算方法，并针对铜钟水电站库区左岸滑坡分别采用条分法和有限元法研究其稳定性，计算结果表明两种计算方法得到的滑坡稳定系数规律相同，但条分法计算值一般大于有限元值，反映出条分法中部分基本假设与实际情况存在一定差异。     

含腐蚀凹坑尿素合成塔的安全评定与分析

对尿素合成塔上封头腐蚀凹坑采用中国SAPV-95和美国API579规范分别进行安全评定，给出安全裕度，简略分析安全评定的结果。