Experiences with a parallel algorithm for data flow analysis

We have designed a family of parallel data flow analysis algorithms for execution on distributed-memory MIMD machines, based on general-purpose, hybrid algorithms for data flow analysis [Marlowe and Ryder 1990]. We exploit a natural partitioning of the hybrid algorithms and explore a static mapping, dynamic scheduling strategy. Alternative mapping-scheduling choices and refinements of the flow graph condensation used are discussed. Our parallel hybrid algorithm family is illustrated on Reaching Definitions, although parallel algorithms also exist for many interprocedural (e.g., Aliasing) and intraprocedural (e.g., Available Expressions) problems [Marlowe 1989]. We have implemented the parallel hybrid algorithm for Reaching Definitions on an Intel iPSC/2. Our empirical results suggest the practicality of parallel hybrid algorithms.An earlier version of this paper was presented at Supercomputing '90.The research reported here was supported, in part, by the New Jersey Commission on Science and Technology and the CAIP Center's Industrial Members, by Siemens Research Corporation and by National Science Foundation grant CCR-8920078.     

圆锥面无键联接技术在重型冷剪机中的应用

本文对圆锥面无键联接技术进行了介绍，并以冷剪机为背景对圆锥面无键联接技术进行了具体的探讨，阐明了设计计算过程、装拆工艺方法及安全注意事项等。     

钢结构设计及轻型钢结构应用

介绍了钢结构的适用范围、形式、布置要求以及进行结构分析的方法，探讨了结构软件的应用以及构件的优化选型，促进了钢结构在土木工程建筑中的广泛应用。     

不甩线圈的多星形移相变极

对于某些槽数和极数比的多星形移相变极电机,提出与前人不同的是在两种极数下均不甩去线圈的绕组方案,使绕组利用率高,且线圈及其联接都较简单.这种绕组方案在一种极数下并联支路略有不平衡,其所引起的电机定子铜耗的增加是极其有限的,不致影响电机的正常运行.     

Minimizing total weighted completion time when scheduling orders in a flexible environment with uniform machines

We consider the scheduling of orders in an environment with m uniform machines in parallel. Each order requests certain amounts of k different product types. Each product type can be produced by any one of the m machines. No setup is required if a machine switches over from one product type to another. Different product types intended for the same order can be produced at the same time (concurrently) on different machines. Each order is released at time zero and has a positive weight. Preemptions are allowed. The completion time of an order is the finish time of the product type that is completed last for that order. The objective is to minimize the total weighted completion time. We propose heuristics for the non-preemptive as well as the preemptive case and obtain worst case bounds that are a function of the number of machines as well as the differences in the speeds of the machines. Even though the worst-case bounds we showed for the two heuristics are not very tight, our experimental results show that they yield solutions that are very close to optimal.     

无键联接传动的特点及锥面弹性衬套设计和应用

无键联接在特殊行业和工况中是键联接传递动力和运动的有力补充,介绍了工程上应用的圆弧三边形型面联接、弹性环无键联接、圆柱面过盈联接等几种无键联接传动方式及其工作原理,并分析了各自的性能特点和应用情况。针对无键联接传动的特点、特殊行业和工况的应用实际,设计了锥面弹性衬套无键联接传动结构并介绍了其在工程中的实际应用。     

长输管线变电所备用电源自动投入系统的改造

根据管道储运公司下属的各变电所目前的运行方式以及备用电源自动投入系统(以下简称“备自投”)的运行情况，指出了备自投使用中的不足之处，并通过增加对应断路器的辅助触点来完善备自投，使变电所运行更加可靠。     

配置抗冲切钢筋的混凝土异形柱-板柱连接试验研究

在9个柱截面为三种典型异形柱(十字形、T形和L形) -板柱连接未配置抗冲切钢筋时的冲切特性试验基础上,以十字形柱-板柱连接为代表,通过三个配置抗冲切钢筋试件与三个未配抗冲切钢筋试件的对比试验,研究了异形柱-板柱连接配置抗冲切钢筋后的冲切特性,同时将锚栓和箍筋的抗冲切性能进行了对比。试验结果表明,抗冲切钢筋可以有效地提高板的受冲切承载力和延性,在改善延性方面,锚栓比箍筋更有效。另外,将国外几个主要规范ACI3 18、BS8110及MC90 ,关于对非矩形荷载面冲切临界截面周长的规定进行了比较,从试验结果看,ACI3 18规范的取法更合理。     

分步重复投影光刻机整机控制管理软件

计算机分系统是光刻机整机控制和管理的中枢，直接反映和影响整机的性能和介绍了计算机硬件接口控制原理，描述了分步重复投影光刻机系统软件的主要设计思想和软件的主要功能。