一种基于RTO的业务排序算法

业务影响分析是业务连续性计划中较为关键的一步,其最终目标是对企业中业务的重要性进行排序。文中的目的是提出一种企业在进行灾难恢复时,各个业务过程之间恢复优先顺序的排序算法。该算法在设计时基于RTO进行排序,并考虑了业务之间的相互依赖关系对恢复顺序的影响。通过实验显示了该算法的合理性：使用该算法可以更好地实施业务影响分析,缩短分析时间,从而提高整个业务连续性实施过程的效率。     

基于图像分析的光学伪装效果评价方法研究

传统的伪装评价方法受到很多条件的限制,需要客观定量反映伪装效果的评价方法.基于量化颜色直方图对伪装方案与实际背景的颜色相似度进行定量评价,利用灰度共生矩阵和小波变换方法计算伪装与背景的纹理相似度.该评价方法不仅能表示伪装与背景的颜色和纹理相似程度,还能反映不同观察距离上伪装与背景的纹理相似度.     

本征掺杂环栅MOSFET器件连续表面势电压方程及其在从积累到反型区域的解析解

本文提出了本征掺杂的长沟环栅MOSFET器件的连续表面势方程并讨论了其物理解。这个 方程适用于器件从积累到强反型的工作区域。原始方程通过简化Poisson方程的精确解得到, 然后通过经验修正得到满足连续性条件的表面势电压方程,允许表面电势及其导数由 解析式表示,同时在积累到反型、线性到饱和区域精确连续。基于这个结果,我们对 表面电势和中心电势对器件尺寸的依赖关系进行了分析,并通过三维的器件模拟进行 了验证。     

BSIM4和ULTRA-BULK模型对称性和连续性的检验

以对比的形式用GUMMEL对称测试电路的模拟结果检验了伯克利大学的BSIM4和北京大学的ULTRA-BULK两个CMOS器件模型的对称性和连续性特性。SPICE模拟结果表明:工业标准模型BSIM4在电荷、电流高阶导数以及电容等的连续性和对称性上具有一系列的缺陷,而最新发展的基于表面势的MOSFET解析模型ULTRA-BULK却表现出必需的连续性和对称性。既然这些属性对于模拟电路和射频电路设计都是非常重要的,那么新一代CMOS模型采用基于表面势的各种MOSFET解析模型将是必然的发展。     

A new plant-wide modelling methodology for WWTPs

This paper presents a new plant-wide modelling methodology for describing the dynamic behaviour of water and sludge lines in WWTPs. The methodology is based on selecting the set of process transformations needed for each specific WWTP to model all unit-process elements in the entire plant. This "transformation-based" approach, in comparison with the conventional "process-based" approach, does not require the development of specific transformers to interface the resulting unit-process models, facilitates the mass and charge continuity throughout the whole plant and is flexible enough to construct models tailored for each plant under study. As an illustrative example, a plant-wide model for a WWTP that includes carbon removal and anaerobic digestion has been constructed, and the main advantages of the proposed methodology for integrated modelling have been demonstrated. As a final consequence, this paper proposes a rewriting of the existing unit-process models according to the new standard transformation-based approach for integrated modelling purposes.     

带双参数四次Said-Ball曲线的扩展

为了使曲线易于实现光滑拼接,同时具有对应于相同控制顶点的不同形状,定义了具有凸包性、对称性、形状可调性等基本性质的新曲线.文中分析了基函数及曲线的性质和2个形状参数的几何意义,给出了2条Said-Ball型曲线的G0,G1,G2连续拼接条件.类似构造了局部形状可调的组合曲面.数值实例说明了所给方法的正确性和有效性.     

几种芳香族合成鞣剂基料的磺化工艺研究

本文主要以溶解性、磺化度等为技术指标，考察了不同磺化剂对几种芳香族合成鞣剂基料磺化反应的影响，从而选择合适的磺化剂。研究了磺化剂用量、磺化反应时间以及反应温度对产物的影响，确定了各基料较佳的磺化工艺条件。     

Computing multi-species chemical equilibrium with an algorithm based on the reaction extents

A mathematical model for the solution of a set of chemical equilibrium equations in a multi-species and multiphase chemical system is described. The computer-aid solution of model is achieved by means of a Newton–Raphson method enhanced with a line-search scheme, which deals with the non-negative constrains. The residual function, representing the distance to the equilibrium, is defined from the chemical potential (or Gibbs energy) of the chemical system. Local minimums are potentially avoided by the prioritization of the aqueous reactions with respect to the heterogeneous reactions. The formation and release of gas bubbles is taken into account in the model, limiting the concentration of volatile aqueous species to a maximum value, given by the gas solubility constant.The reaction extents are used as state variables for the numerical method. As a result, the accepted solution satisfies the charge and mass balance equations and the model is fully compatible with general reactive transport models.     

600MW机组锅炉灭火不停机操作优化

针对宁夏大唐国际大坝发电有限责任公司2×600 MW火电机组设备状况,总结了锅炉灭火后的操作方法,对锅炉灭火后不停机的可行性进行了讨论,并提出了优化建议。     

Canopy surface technique for parametric blending

A method based on canopy surfaces is presented for blending parametric surfaces. The blend designed using this method gives freedom to the designer in selecting i) the primitive surfaces to be blended, ii) the contact curves lying on them (in which the blend meets the primitives), iii) the endtangent directions along the contact curves (which are used to ensure tangentplane continuity), and iv) the shape of the cross-sectional curve. An important feature of this method, which is not seen in earlier methods, is the use of end tangents to ensure theC ¹ continuity of iso-parametric curves across the junctions between the blend and the primitives in addition to the tangent-plane continuity.