岸边集装箱起重机节能发电系统的设计

针对港口岸边集装箱起重机设计了一种新型高效的节能发电方案,利用简单有效的机械传动方式,在原有控制系统的基础上,增加部分闭环控制系统,实现无级变矩,使发电量最大化。运用ADAMS软件对下降过程中可调变速器的状态进行运动学仿真,并建立节能系统发电方案,以及控制流程。     

One‐dimensional low‐profile slot‐loaded epsilon‐negative zeroth‐order antenna with improved radiation efficiency

A novel low‐profile slot‐loaded epsilon‐negative (ENG) transmission line (TL) is proposed for efficiency‐improved zeroth‐order resonant antennas. It is demonstrated that the quality factor of the ENG TL‐based zeroth‐order resonator can be remarkably reduced by enlarging the slot size, therefore, a highly efficient radiating resonator can be designed with higher gain at the zeroth‐order frequency. Two one‐dimensional zeroth‐order resonant antennas with identical unit cell size but different unit cell number are fabricated and measured, each of which can realize a monopole‐like radiation pattern at nearly the same frequency. A maximum gain of 1.96 dBi is generated for the electrically small two‐unit‐cell configuration together with an improved efficiency from 57.0% to 69.1%, while the compact four‐unit‐cell antenna can realize a maximum gain of 3.86 dBi with an improved efficiency from 71.0% to 82.4%. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Enhanced gas barrier properties of graphene-TiO2 nanocomposites on plastic substrates assisted by UV photoreduction of graphene oxide

Reduced graphene oxide (rGO) sheets have received great attention as a key element for thin barrier films that block the permeation of water vapor and other gases. However, it remains a challenge to prepare the rGO-based barrier films on plastic substrates through a chemically benign and low temperature fabrication route. Toxic chemicals or high temperature thermal treatments that are widely used for preparing rGO need to be avoided because they can damage the underlying plastic substrates. In this study, we report the fabrication of rGO/TiO₂ composite films via an eco-friendly and low temperature ultraviolet (UV) photoreduction process and demonstrate their enhanced gas barrier properties by measuring water vapor transmission rates (WVTRs). When photocatalytic TiO₂ nanoparticles are employed, UV exposure reduces the GO/TiO₂ composite solution to form rGO/TiO₂, which is subsequently deposited on plastic substrates. The rGO/TiO₂ composites become resistant to water absorption because the UV photoreduction of GO/TiO₂ effectively removes most polar groups on the GO sheets. We confirmed that rGO/TiO₂ composites were successfully deposited onto the plastic substrate through a solution process and the barrier films led to a substantial reduction in WVTRs of the substrate. Our strategy for preparing graphene-based thin barrier films by using a UV photoreduction process enables the fabrication of solution-processed graphene-based encapsulation layers on plastic substrates with an eco-friendly and low temperature fabrication method.     

Modification of nanostructured fused silica for use as superhydrophobic,IR-transmissive,anti-reflective surfaces

In order to mimic and enhance the properties of moth eye-like materials, nanopatterned fused silica was chemically modified to produce self-cleaning substrates that have anti-reflective and infrared transmissive properties. The characteristics of these substrates were evaluated before and after chemical modification. Furthermore, their properties were compared to fused silica that was devoid of surface features. The chemical modification imparted superhydrophobic character to the substrates, as demonstrated by the average water contact angles which exceeded 170°. Finally, optical analysis of the substrates revealed that the infrared transmission capabilities of the fused silica substrates (nanopatterned to have moth eye on one side) were superior to those of the regular fused silica substrates within the visible and near-infrared region of the light spectrum, with transmission values of 95% versus 92%, respectively. The superior transmission properties of the fused silica moth eye were virtually unchanged following chemical modification.     

车辆自组织网络中新型NP-CSMA随机多址协议研究分析

智能交通的出现使得车辆自组织网络受到越来越多的关注。车辆自组织网络的动态拓扑结构变化非常剧烈,这对网络的吞吐率、传输速率等性能提出了很高的要求。提出1种具有握手机制协议的自适应多通道双时钟NP-CSMA随机多址接入协议。该协议首先区分2种P-CSMA协议,握手机制成功解决了隐藏的终端问题,双时钟机制减少了平均空闲时间,多通道机制增加通道数量和划分用户优先级的同时提高了系统吞吐率,自适应机制能够使系统在高负载下保持稳定吞吐率。还对该协议的传输速率进行了分析,得出该协议的传输速率相对较高的结论。通过平均周期方法推导吞吐率和传输速率的计算公式,仿真结果与理论推导一致。     

Investigation of the relationships of process parameters,molten pool geometry and shear strength in laser transmission welding of polyethylene terephthalate and polypropylene

This study concerns the laser transmission welding (LTW) of polyethylene terephthalate (PET) and polypropylene (PP) which are widely used in the automotive, aerospace and medical industries. The relationships of process parameters, molten pool geometry (both width and depth) and shear strength (SS) in LTW process are systematically investigated through finite element method (FEM), response surface methodology (RSM) and experiments. Thereinto, the relationships between the molten pool depths to width (D/W) ratio and SS are firstly investigated. Firstly, a three-dimensional thermal model is developed to simulate the temperature field and molten pool geometry of the LTW process. The simulation results are confirmed by experiments. Then RSM is utilized to design the experiments and establish the mathematical relationships between the process parameters and molten pool geometry based on the simulation results. The interaction effects of the process parameters on the molten pool geometry are analyzed. Finally, the simulation results are further used for searching the relationships between the molten pool D/W ratio and the SS (from tensile experiments). The maximum value of the SS and the corresponding molten pool D/W ratio is found. The result reveals that the molten pool D/W ratio has a significant influence on the SS. Moreover, this finite element model can also play a commendable guiding role in the LTW experiments with acceptable accuracy.     

The effects of trust and constructive controversy on student achievement and attitude in online cooperative learning environments

This study investigated the effects of trust and constructive controversy on student achievement and attitude in online cooperative learning environments. Students in one university course were randomly assigned to one of the two treatment groups after they took part in a common initial workshop on general cooperative learning skills. The “trust” and the “constructive controversy” groups received subsequent associated skills training. The overall results indicated that after each group received the treatment during online cooperative group activities, the “trust” groups had significantly higher achievement than the “constructive controversy” groups. In addition, the “trust” groups had significantly more positive attitudes toward online cooperative learning than the “constructive controversy” groups. Specifically, using “trust” building strategies was significantly more effective than using “constructive controversy” strategies for improving the ‘openness and sharing’ and ‘acceptance and support’ components of student attitudes in online cooperative learning environments.     

基于.net的频带传输系统设计与实现

针对频带传输存在概念抽象、知识点深等教学问题,设计了一款基于Visual Studio.net的频带传输系统,该系统采用结构化与面向对象相结合的方法进行开发,内容包含ASK、FSK、PSK的调制与解调技术.本文介绍了该系统的功能模块分析与设计,并对各种关键技术予以重点介绍.经测试,系统界面友好、交互性强,能够有效的降低课程学习的难度.     

Quantifying the size‐resolved dynamics of indoor bioaerosol transport and control

Understanding the bioaerosol dynamics of droplets and droplet nuclei emitted during respiratory activities is important for understanding how infectious diseases are transmitted and potentially controlled. To this end, we conducted experiments to quantify the size‐resolved dynamics of indoor bioaerosol transport and control in an unoccupied apartment unit operating under four different HVAC particle filtration conditions. Two model organisms (Escherichia coli K12 and bacteriophage T4) were aerosolized under alternating low and high flow rates to roughly represent constant breathing and periodic coughing. Size‐resolved aerosol sampling and settle plate swabbing were conducted in multiple locations. Samples were analyzed by DNA extraction and quantitative polymerase chain reaction (qPCR). DNA from both organisms was detected during all test conditions in all air samples up to 7 m away from the source, but decreased in magnitude with the distance from the source. A greater fraction of T4 DNA was recovered from the aerosol size fractions smaller than 1 μm than E. coli K12 at all air sampling locations. Higher efficiency HVAC filtration also reduced the amount of DNA recovered in air samples and on settle plates located 3‐7 m from the source.