液黏离合器旋转动密封泄漏特性试验研究

为探究并改善液黏离合器旋转动密封的泄漏特性，采用Tr1-6Kr-22A变速试验台开展其密封性能试验，对比分析操作参数和结构参数对各个泄漏通道泄漏量的影响规律。结果表明：操纵油泄漏量整体偏大，润滑油泄漏通道受压力影响最小；随着操纵油压力的增加，各泄漏通道泄漏量亦随之上升，但高压工况下泄漏量增势平缓；各泄漏通道泄漏量与转速存在正相关关系，但油压对密封泄漏量影响较转速更为明显；密封环带宽度对泄漏量影响较大，较宽的密封环带可有效降低密封总体泄漏量；采用较宽密封环带的试验工装各个通道泄漏量最小，且受操作参数影响较小，适用于压力波动较大的场合，而在转速波动较大时密封泄漏量出现阶跃特性。     

Two-Phase Bidirectional Dual-Relay Selection Strategy for Wireless Relay Networks

In this article, we introduce a new bi-directional dual-relay selection strategy with its bit error rate (BER) performance analysis. During the first step of the proposed strategy, two relays out of a set of N relay-nodes are selected in a way to optimize the system performance in terms of BER, based on the suggested algorithm which checks if the selected relays using the max-min criterion are the best ones. In the second step, the chosen relay-nodes perform an orthogonal space-time coding scheme using the two-phase relaying protocol to establish a bi-directional communication between the communicating terminals, leading to a significant improvement in the achievable coding and diversity gain. To further improve the overall system performance, the selected relay-nodes apply also a digital network coding scheme. Furthermore, this paper discusses the analytical approximation of the BER performance of the proposed strategy, where we prove that the analytical results match almost perfectly the simulated ones. Finally, our simulation results show that the proposed strategy outperforms the current state-of-the-art ones.     

山区输水管道工程的设计要点及陡坡直埋工艺

简要介绍了山区输水管道设计中常用的管道线路、管道材质、敷设方式、防冻方式及选取原则,重点介绍了一种适应山体陡坡段输水管直埋敷设的工艺。以供相关工程设计及施工人员借鉴。     

Accurate low complexity modeling of twisted pairs suitable for G.fast frequencies

As the higher and higher frequency bands of existing metallic cables in access networks are being continuously exploited by modern transmission technologies, such as the G.fast, the necessity of providing accurate and suitable modeling of their transmission characteristics is evident. Therefore, this paper is focused on modeling of a propagation constant of twisted pairs and metallic cables at high frequencies up to 250 MHz, and an innovative arsinh model is proposed and described. This new model is based on an idea of adopting inverse hyperbolic sine function for modeling of both secondary line coefficients, attenuation constant and phase constant, and its main motivation is to provide their accurate estimations for G.fast frequencies up to 250 MHz for various types of metallic cables while maintaining a low computational complexity. The proposed model was compared with numerous characteristics measured for various real metallic cables as well as with several existing models in order to illustrate its potential. The results, which are presented within this paper, clearly illustrate that the proposed arsinh model generally outperforms existing standard models based on the equal number of required parameters. Copyright © 2015 John Wiley & Sons, Ltd.     

Polyaniline sensitized Pt@TiO2 for visible-light-driven H2 generation

Polyaniline is a typical conducting polymer with high migration electron rate, good stability, eco-friendly properties, and high absorption coefficients for visible light. In the present study, polyaniline decorated Pt@TiO₂ for visible light-driven H₂ generation is reported for the first time. The above-mentioned nanocomposite is prepared through a simple oxidative-polymerization and characterized by infrared spectroscopy, transmission electron microscopy, X–ray diffraction, thermogravimetric analysis, and ultraviolet–visible diffuse reflectance spectra. Polyaniline modification improves the absorption of the nanocomposite in visible light region via a photosensitization effect similar to dye–sensitization but does not influence the crystal structure and size of Pt@TiO₂. The polyaniline modified Pt@TiO₂ exhibits a remarkable visible light activity (61.8 μmol h⁻¹ g⁻¹) and good stability for H₂ generation (with an average apparent quantum yield of 10.1%) with thioglycolic acid as an electron donor. This work provides new insights into using conducting polymers, including polyaniline, as a sensitizer to modify Pt@TiO₂ for visible-light hydrogen generation.     

428XL光缆交叉线的工作原理及故障检修方法

428XL光缆交叉线是428XL仪器的重要组成部分,它的问世有效提高了采集数据的传输速度,满足了随着野外采集道数的增加采集数据的数据量越来越大的数传要求。本文从428XL光缆交叉线的基本组成入手,详细剖析了428XL光缆交叉线的传输原理,并介绍了光缆交叉线应用于428XL仪器施工时的工作流程及其在施工中可能出现的故障和相应的检修方法。     

Thermo- and pH-Responsive Polymersomes of Poly(α,β-N-substituted-DL-aspartamide)s

Materials that can respond to multiple stimuli, such as temperature and pH changes, are of considerable interest for applications in drug delivery systems. Notably, α,β-[poly(2-hydroxyethyl)-DL -aspartamide] is a potentially useful material for such applications. This study investigated the temperature and pH responsiveness of polymers structurally similar to α,β-[poly(2-hydroxyethyl)-DL -aspartamide], namely, poly(α,β-N-substituted-DL -aspartamide)s, in aqueous media. These polymers were derived from polysuccinimide (PSI), which was first synthesized via acid-catalyzed bulk polycondensation of L -aspartic acid (L-ASP) in the presence of 85% o-phosphoric acid under N2. Two primary amino alcohols, 4-aminobutanol (4AB) and 6-aminohexanol (6AH), were then respectively utilized to modify PSI to form poly (α,β-N-substituted-DL -aspartamide)s via aminolysis. Different ratios of these two amino alcohols were used to modify the polymer to produce a series of copolymers with lower critical solution temperatures ranging from 53–28°C when dispersed in aqueous media. Moreover, the properties of the poly(α,β-N- substituted-DL -aspartamide)s in aqueous solution were affected by pH changes. The morphology of the particles formed by these amphiphilic polymers was observed using scanning electronic microscopy and transmission electronic microscopy, and the particles were found to be polymersomes with shell and hollow core structures and diameters of 0.5–1 μm. Other properties of this series of self-assembly copolymers were also characterized. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Maximization of average number of correctly received symbols over multiple channels in the presence of idle periods

In this study, optimal channel switching (time sharing) strategies are investigated under average power and cost constraints for maximizing the average number of correctly received symbols between a transmitter and a receiver that are connected via multiple flat-fading channels with additive Gaussian noise. The optimal strategy is shown to correspond to channel switching either among at most three different channels with full channel utilization (i.e., no idle periods), or between at most two different channels with partial channel utilization. Also, it is stated that the optimal solution must operate at the maximum average power and the maximum average cost, which facilitates low-complexity approaches for obtaining the optimal strategy. For two-channel strategies, an upper bound is derived, in terms of the parameters of the employed channels, on the ratio between the optimal power levels. In addition, theoretical results are derived for characterizing the optimal solution for channel switching between two channels, and for comparing performance of single channel strategies. Sufficient conditions that depend solely on the systems parameters are obtained for specifying when partial channel utilization cannot be optimal. Furthermore, the proposed optimal channel switching problem is investigated for logarithmic cost functions, and various theoretical results are obtained related to the optimal strategy. Numerical examples are presented to illustrate the validity of the theoretical results.