Two dimensional deformation characteristics of bloom CC with liquid core reduction

A two-dimensional model was applied to simulate the liquid core reduction(LCR) technology of bloom CC using ANSYS software.The deformation characteristics of bloom under different liquid fraction and reducing amount are obtained.The results indicate that the main deformation condition of bloom shell is compressive strain,mainly undertaken by the liquid core,which increases with the enhancement of reducing amount.Solidified shell takes minor deformation.The longitudinal section of bloom appears sunken and the narrow side bulges,which grow serious when the liquid fractionincreases.     

砂岩油藏注水井深部酸化技术

吐哈油田长期注水开发后,注入水外源性伤害和地层内源性伤害不断在地层深部累积,采用常规酸化措施效果不理想。为此,通过长岩心污染模拟实验,研究了深部污染的污染特征及酸化解堵机理,通过解堵液缓速和工艺过程的综合应用实现深部解堵。应用AcidGuide专家系统对单井进行全面的污染诊断分析,并进行了参数优化设计,形成了适应吐哈油田深部酸化解堵的技术体系,现场应用取得良好效果,为类似低渗透油藏水井增注措施提供参考。     

高温高压下多种气体在储层岩心中吸附等温线的测定

利用自行研制的XF1型高温高压气体吸脱附测试仪,结合一台色谱分析仪(HP6890),一套抽真空系统,分别测定了N₂、CH₄、C₂H₆、C₃H₈、nC₄及其混合气体在三个岩心中的吸脱附等温线共计42条(单组分30条,累计测试点516个;混合气12条,累计测试点203个),以及吸附平衡后混合气的自由气相组成、吸附相组成和各组分的吸附等温线各48条(累计测试点431个).测试的温度为50.5℃.实验结果表明:①储层岩心介质对烃类气体的吸附现象是客观存在的,不容忽视;②仅就测试所得的数据来看,如果忽略其它因素,可以初步估计,不考虑吸附的砂岩储层气藏的计算储量将比考虑吸附少5%以上;③岩心-气体吸附体系的吸附能力除受压力影响外,更受到储层介质、岩石成分、结构和物性性质的影响,除此之外,还受到多组分气体中重烃组分数目、摩尔含量等的影响;④多组分气体组分相对吸附量能有效地表征多组分气体中各组分气体的竞争吸附能力大小,依据这个指标可将五元多组分气体体系中各组分气体按其竞争吸附能力由强到弱排序为nC₄>C₃H₈>C₂H₆>CH₄>N₂.     

A novel method of suppressing the inrush current of transformers by using a series‐connected voltage‐source PWM converter

This paper proposes a novel method of suppressing the inrush current of transformers. A small‐rated voltage‐source PWM converter is connected in series to the transformers through a matching transformer. As the connected PWM converter serves as a resistor for the source current, no inrush phenomena occurs. The required rating of the PWM converter, which serves as the damping resistor for the inrush phenomena, is 1/400 that of the main transformers in single‐phase circuits. In three‐phase circuits, it is 1/900. The basic principle of the proposed method is discussed. Digital computer simulation is implemented to confirm the validity and excellent practicability of the proposed method using the PSCAD/EMTDC. A prototype experimental model is constructed and tested. The experimental results demonstrate that the proposed method can perfectly suppress the inrush phenomena. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 157(4): 56–65, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20174     

论基于技术资本的核心创新能力

首先界定技术资本的概念，然后以“核心能力特征参量罗盘”作为指导，全面展开论述企业核心创新能力相应4方面的投资策略，最后，运用一个案例具体展示基于技术资本核心创新能力的提升经验。     

压水堆堆芯换料设计优化的研究

讨论压水堆堆芯换料设计优化问题，并研制一套实用的换料优化软件包，可用于低泄漏、外－内和改进的外－内装料方案的优化。在低泄漏方案优化时，利用哈林原理将燃料组件布置与可燃毒物配置的优化问题脱耦成两步优化问题。先用线性规划方法进行无可燃毒物时燃料组件布置的优化，然后再用可变容差法寻找可燃毒物的优化布置。应用该软件对秦山核电厂首次难芯换料方案进行了优化，提出了可供参考的一些优化布置方案。     

关于混凝土钻芯取样法有关标准的讨论

本文对国内不同行业有关混凝土钻总取样方法的标准进行了讨论，供月行在使用和修订相应标准时参考。     

糯扎渡心墙堆石坝心墙方案比较研究

糯扎渡工程在可行性研究阶段，比较了直心墙堆石坝和斜心墙堆石坝两种方案，分析表明，直心墙堆石坝在坝坡稳定性、坝体应力及抗震性方面均满足设计要求，且在地形地质条件、基础处理、抗震性能、施工方便性、工程造价等方面不同程度地优于斜心墙堆石坝，因此，设计最终选择直心墙堆石坝方案。     

Preparation of monodisperse poly(vinyl alcohol) microspheres by heterogeneous surface saponification and iodine complex formation

Monodisperse poly(vinyl acetate) (PVAc) microspheres with high molecular weight obtained by suspension polymerization of vinyl acetate were saponified in alkaline aqueous solution to keep their spherical structure. The saponification was restricted on the surface of the PVAc microspheres and obtained particles had skin/core structure. Various poly(vinyl alcohol) (PVA) microspheres with different diameters and degrees of saponification (DSs) were obtained. The conversion of PVAc to PVA during the heterogeneous surface saponification time were examined by nuclear magnetic resonance spectroscopy and after 72 h hydrogel type PVA microspheres completely saponified were obtained. The crystal melting temperatures of the microspheres obtained by the saponification were measured a constant value of 238°C irrespective of varying DS, and the peaks became enlarged as reaction time. Iodine complexes were formed in saponified microspheres with DS of 41% and 99% by immersing them in I₂/KI aqueous solution and decomposed by the reduction of I₂ in the complexes to 2I^? using sodium sulfite to confirm whether the skin formed through the saponification was composed of PVA with high VA content. Obviously, characteristic blue color developments owing to I₅^?‐PVA complexes were observed in both saponified regions and a red in the PVAc core. Consequently, it was concluded that the PVA skins formed by heterogeneous surface saponification had high DSs. Such complexes endowed polymeric microspheres a good radiopacity which would be useful in clinical treatment of vascular diseases and were examined by X‐ray irradiation image. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Techniques and Apparatus for Measuring Rotational Core Losses of Soft Magnetic Materials

In many situations such as the cores of a rotating electrical machine and the T joints of a multiphase transformer, the local flux density varies with time in terms of both magnitude and direction, i.e. the flux density vector is rotating. Therefore, the magnetic properties of the core materials under the rotating flux density vector excitation should be properly measured, modeled and applied in the design and analysis of these electromagnetic devices. This paper presents an extensive review on the development of techniques and apparatus for measuring the rotational core losses of soft magnetic materials based on the experiences of various researchers in the last hundred years.