Petri网模型代码映射研究

为了简化仿真系统的实现过程,分析总结了Petri网到程序代码的映射准则,从Petri网的基本元素和关系入手,根据逻辑关系建立映射的三类原子语句,并通过两种合成方式形成分子语句。以原型Petri网为例,遍历可达标识图的各种分支路径,提出循环路径到循环结构语句的代码映射方法。最后给出了带抑制弧的扩展Petri网和受控Petri网的代码映射方案,为Petri网向程序代码的转换提供了理论依据。     

基于信道估计的SC-FDMA自适应传输方案

由于SC-FDMA的峰均功率比（PAPR）比OFDMA低,因而被应用于3GPP LTE上行链路。论文分析了SC-FDMA传输系统的数学模型,介绍了基于导频的SC-FDMA系统最小二乘（LS）和线性最小均方误差（LMMSE）信道估计算法。在比较该系统集中式和分布式两种子载波映射方式在高低速不同移动环境下传输性能的基础上,提出了一种基于信道估计的SC-FDMA系统自适应传输方案。经仿真证实该方案比单纯采用一种子载波映射的方法性能更加优越,在相同的误码率情况下,能够节省大概3dB左右的信噪比。     

模型桥墩局部冲刷瞬时地形数据自动获取装备研制

模型试验中冲刷地形测绘装备相对落后,致使桥墩周围局部冲刷瞬时地形数据无法实时获取,冲刷动态发展过程及机理的模型试验研究工作难以开展。研制了一种模型桥墩局部冲刷瞬时地形数据等值线自动绘制装备,并利用室内水工模型试验优化了各组成的性能指标,量化了绘制装备的设计参数,分析了监测系统在模型应用中的测绘精度及在工程原型中的适用性。模型试验研究表明,该装备结构简单,操作方便,加工制作成本较低,精度及灵敏性较高,能够快速获取动态过程中局部冲刷瞬时地形等值线,适用于局部冲刷发展影响流场特性研究中的水下地形快速测绘,也可按放大比尺制作成型后应用于涉水建筑物周围水下地形监测。     

3D human pose estimation in motion based on multi-stage regression

3D human pose estimation in motion is a hot research direction in the field of computer vision. However, the performance of the algorithm is affected by the complexity of 3D spatial information, self-occlusion of human body, mapping uncertainty and other problems. In this paper, we propose a 3D human joint localization method based on multi-stage regression depth network and 2D to 3D point mapping algorithm. First of all, we use a single RGB image as the input, through the introduction of heatmap and multi-stage regression to constantly optimize the coordinates of human joint points. Then we input the 2D joint points into the mapping network for calculation, and get the coordinates of 3D human body joint points, and then to complete the 3D human body pose estimation task. The MPJPE of the algorithm in Human3.6 M dataset is 40.7. The evaluation of dataset shows that our method has obvious advantages.     

Response correction techniques for surrogate‐based design optimization of microwave structures

Simulation‐based optimization has become an important design tool in microwave engineering. However, using electromagnetic (EM) solvers in the design process is a challenging task, primarily due to a high‐computational cost of an accurate EM simulation. In this article, we present a review of EM‐based design optimization techniques exploiting response‐corrected physically based low‐fidelity models. The surrogate models created through such a correction can be used to yield a reasonable approximation of the optimal design of the computationally expensive structure under consideration (high‐fidelity model). Several approaches using this idea are reviewed including output space mapping, manifold mapping, adaptive response correction, and shape‐preserving response prediction. A common feature of these methods is that they are easy to implement and computationally efficient. Application examples are provided. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

Efficient design of SIW filters with knowledge‐embedded space mapping technique

This article presents an optimization technique for the design of substrate‐integrated waveguide (SIW) filters using knowledge‐embedded space mapping. An effective coarse model is proposed to represent the SIW filter. The proposed coarse model can be analyzed in the available commercial software ADS. The embedded knowledge includes not only formulas but also extracted design curves, which help to build the mapping between the coarse and fine models. The effectiveness of the proposed method is demonstrated through a design example of a six‐pole SIW filter. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

SVM-based ontology matching approach

There are a lot of heterogeneous ontologies in semantic web, and the task of ontology mapping is to find their semantic relationship. There are integrated methods that only simply combine the similarity values which are used in current multi-strategy ontology mapping. The semantic information is not included in them and a lot of manual intervention is also needed, so it leads to that some factual mapping relations are missed. Addressing this issue, the work presented in this paper puts forward an ontology matching approach, which uses multi-strategy mapping technique to carry on similarity iterative computation and explores both linguistic and structural similarity. Our approach takes different similarities into one whole, as a similarity cube. By cutting operation, similarity vectors are obtained, which form the similarity space, and by this way, mapping discovery can be converted into binary classification. Support vector machine (SVM) has good generalization ability and can obtain best compromise between complexity of model and learning capability when solving small samples and the nonlinear problem. Because of the said reason, we employ SVM in our approach. For making full use of the information of ontology, our implementation and experimental results used a common dataset to demonstrate the effectiveness of the mapping approach. It ensures the recall ration while improving the quality of mapping results.     

Polynomial approximation of functions of matrices and applications

In solving a mathematical problem numerically, we frequently need to operate on a vector by an operator that can be expressed asf(A), whereA is anN ×N matrix [e.g., exp(A), sin(A), A^–-]. Except for very simple matrices, it is impractical to construct the matrixf (A) explicitly. Usually an approximation to it is used. This paper develops an algorithm based upon a polynomial approximation tof (A). First the problem is reduced to a problem of approximatingf (z) by a polynomial in z, where z belongs to a domainD in the complex plane that includes all the eigenvalues ofA. This approximation problem is treated by interpolatingf (z) in a certain set of points that is known to have some maximal properties. The approximation thus achieved is almost best. Implementing the algorithm to some practical problems is described. Since a solution to a linear systemAx=b isx=A ^–1 b, an iterative solution algorithm can be based upon a polynomial approximation tof (A)=A ^–1. We give special attention to this important problem.     

一种改进的人脸纹理映射方法

识别人脸图像优化问题,由于人脸纹理映射时容易出现的纹理扭曲和畸变现象,影响图像的真实性,提出一种改进的纹理图像映射方法。根据人脸特征点信息,利用特征块匹配法配准正侧面人脸图像,并使用加权平滑算法和金字塔方法对图像进行双重融合实现图像的平滑过渡;然后利用一种特殊的定位方法来计算三维人脸模型上顶点对应的纹理坐标;最后根据纹理坐标将纹理图像映射到三维特定人脸模型表面上,可得到具有真实感的三维人脸模型。实验结果表明,纹理合成方法简捷有效,纹理映射结果生动逼真,有效的避免了纹理图像的扭曲和畸变现象,具有较高的鲁棒性。     

太阳风粒子数据映射模型的设计与实现

为了能够快速获得第三级太阳风粒子可分析处理的结构化数据,本文采用将数据映射到内存和采用语言集成查询技术解决数据的完整映射和快速访问。通过设计数据映射模型,将用PDS数据的数据标签和数据产品分别映射到模型的值域和属性域,解决本地或网络数据内存映射的问题。为测试这个实例,采用双倍缓冲和贝塞尔插值技术对数据能谱进行了实时绘制。结果表明该模型具有高效性、完备性和高吻合度。这个基于内存映射的模型能够较好地解决异构数据快速结构化数据访问的数据源动力不足问题,为进一步处理和分析太阳高能粒子的频谱、成份和通量及随时间、空间变化的分布特征等提供了基础。