新型无石棉摩阻材料用增强纤维研究进展

综述了近几年无石棉摩阻材料用增强纤维研究进展,介绍了摩阻材料在使用过程中的摩擦磨损机制,重点介绍了新型无石棉摩阻材料用增强纤维的研究成果。     

The prediction of transport parameters in filamentous fermentation broths based on results obtained in pseudoplastic polymer solutions

Transport phenomena studies on single phase “model” fluids are of limited value in biochemical engineering if they cannot be translated to the heterogeneous systems encountered in real fermentation processes. In this paper we discuss the utility of polymer solutions as models of filamentous fermentation broths for evaluation of: pipeline friction factors and impeller power numbers (turbine and helical ribbon). To a first approximation, polymer solutions can serve as suitable models for the prediction of laminar flow pressure drop in pipelines and turbulent power consumption in stirred tanks. However, results obtained on polymer solutions do not directly apply to filamentous fermentation broths for predictions of laminar flow impeller power consumption and the transition point for turbulent flow in stirred tanks. These discrepancies are believed to result from the existence of a time dependent yield stress in filamentous fermentation broths.     

Pressure drop for single and two‐phase flow of non‐newtonian liquids in helical coils

New experimental results on pressure loss for the single and two‐phase gas‐liquid flow with non‐Newtonian liquids in helical coils are reported. For a constant value of the curvature ratio, the value of the helix angle of the coils is varied from 2.56° to 9.37°. For single phase flow, the effect of helix angle on pressure loss is found to be negligible in laminar flow regime but pressure loss increases with the increasing value of helix angle in turbulent flow conditions. On the other hand, for the two‐phase flow, the well‐known Lockhart‐Martinelli method correlates the present results for all values of helix angle (2.56‐9.37°) satisfactorily under turbulent/laminar and turbulent/turbulent conditions over the following ranges of variables as: 0.57 ≤ n′ ≤ 1; Re′ < 4000; Re_l < 4000; Re_g < 8000; 8 ≤ x ≤ 1000 and 0.2 ≤ De′ ≤ 1000.     

植被排列方式及坡度对坡面流Fr影响的试验研究

为探究植被的排列方式及坡度大小对坡面流弗劳德数Fr的影响,以期揭示坡面流弗劳德数Fr的内在规律。利用人工模拟试验,系统研究了6个坡度、3种植物排列方向与水流方向呈不同走向角的条件下Fr与单位底面积的空间摩阻表面积K值的特征关系。表明在非淹没状态下,Fr与K值的关系为随K值的增大Fr呈现先减小后趋于平稳的趋势;Fr的取值随坡度的增大而增大;在一定的坡度范围内,同一坡度下,当Fr1时,同一K值下,走向角越大对应的Fr值越小,当Fr1时则相反;同一走向角下,在同一K值下,坡度越大对应的Fr就越大。得出在坡度一定的条件下,坡面植被的排列方式不同,弗劳德数Fr的取值也不相同;坡度是影响Fr取值范围的重要因素之一。     

超高分子量聚乙烯纤维/有机玻璃复合材料摩擦磨损性能研究

用真空浸渍法成功制备出了超高分子量聚乙烯纤维／有机玻璃(UHMWPE／PMMA)复合材料，并对基体材料PMMA，单向超高分子量聚乙烯纤雏／有机玻璃复合材料以及三维编织超高分子量聚乙烯纤维／有机玻璃(即UHMWPE3D／PMMA)复合材料的摩擦磨损性能进行了研究。实验证明UHMWPE／PMMA复合材料具有优良的摩擦磨损性能。经过纤维增强的复合材料的摩擦磨损性能优于基体材料，三维编织纤维增强的复合材料其磨损远小于单向纤维增强的复合材料，但其摩擦系数没有显著变化。     

几种工程塑料摩擦磨损性能的分析与比较

对聚甲醛，尼龙1010和聚四氟乙烯三种工程塑料的摩擦磨损性能进行了测试，分析和比较了它们不同截荷及不同对磨时间的摩擦磨损性能。     

竖向荷载作用下斜桩承载特性数值分析

近年来,斜桩在桥梁、码头、海上钻井平台及大型输电线路塔架基础等工程中得到广泛应用,研究不同倾角斜桩的荷载传递及承载特性实用意义较大。基于ABAQUS软件,考虑桩土接触特性,模拟分析了不同倾角斜桩的承载特性。结果表明:桩身倾角不大于10°时,倾斜角对单桩的极限承载力影响不大,但会在桩身产生一定弯矩以及桩顶产生一定的水平位移;桩身轴力沿桩长方向的衰减速率随桩身倾角的增大而增大;斜桩桩身弯矩主要分布在桩顶下1/2桩长范围内,其最大值的位置不受桩身倾角以及桩顶竖向荷载的影响;斜桩桩身侧摩阻力沿桩长大致呈"S"型分布,其桩顶以下1/6桩长范围内侧摩阻力远远大于直桩。     

Cooperative adsorption behavior of fatty acid methyl esters from hexadecane <Emphasis Type="Italic">via</Emphasis> coefficient of friction measurements

The frictional behaviors of methyl oleate (MO), methyl palmitate (MP), methyl laurate (ML), and methyl stearate (MSt) as additives in hexadecane have been examined in a boundary lubrication test regime using steel contacts. It was found that the transient attributes of coefficient of friction (COF)-time spectra are a sensitive measure of adsorption equilibria. Critical additive concentrations were defined and used to perform novel and simple Langmuir analyses that provide an order of adsoprtion energies: MSt>MP>MO≥ML. Application of Langmuir, Temkin, and Frumkin-Fowler-Guggenheim adsorption models via nonlinear fitting of a general cooperative model demonstrates the necessary inclusion of cooperative effects in the applied model. In agreement with the qualitative features of steady-state COF-concentration plots, MSt modeling requires minimal cooperative interaction terms. However, MO, MP, and ML data require large attractive interaction terms to be adequately fitted. Primary adsorption energies calculated via the cooperative model are necessarily decreased, whereas total adsorption energies correlate well with values obtained via critical concentration analyses. These results and comparisons with previous adsorption studies of MO and MSt suggest that primary (ester-surface) and secondary (alkyl-surface) adsorbate-adsorbent, adsorbate-adsorbare, and (free-additive) adsorpt-adsorpt interactions collectively determine both the calculated primary and the cooperative interaction energies.     

聚氨酯橡胶摩擦轮有限元及疲劳寿命分析

针对汽车滑板输送机聚氨酯橡胶摩擦轮的开裂问题,对摩擦轮与滑板之间的相互作用进行预压紧力和接触摩擦驱动有限元分析,获得摩擦轮的应力和变形分布等结果.在获得摩擦轮周向应力分布的基础上,根据疲劳裂纹扩展公式对聚氨酯橡胶部分进行疲劳寿命分析,验证是否满足设计要求.分析过程和结果能为聚氨酯橡胶摩擦轮的详细设计提供参考.     

重塑黄土与植物根系界面摩擦离散元分析

油松作为一种植根于黄土地区的常见植物,在提高黄土强度方面起重要作用。为了弄清油松根系在黄土地区的固土效应,本文采用离散单元法(Distinct Element Method)模拟根系拉拔试验,分析了法向压力、根系埋深、含水率对根-黄土界面摩擦力学特性的影响。结果表明:拉拔试验中,根-黄土界面峰值强度、残余强度随着法向力的增大而增大;峰值强度、残余强度随着根系埋深的增加而增大;随着含水率的降低,根-黄土界面峰值强度、残余强度呈增大的趋势。