Fuel provision for nonbreeding deuterium-tritium fusion reactors

Nontritium-breeding D-T reactors have decisive advantages in minimum size, unit cost, variety of applications, and ease of heat removal over reactors using any other fusion cycle, and significant advantages in environmental and safety characteristics over breeding D-T reactors. Considerations of relative energy production demonstrate that the most favorable source of tritium for a widely deployed system of nontritium-breeding D-T reactors is the very large (10 GW thermal) semicatalyzed-deuterium (SCD), or sub-SCD reactor, where none of the escaping³He (> 95%) or tritium (< 25%) is reinjected for burn-up. Feasibility of the ignited SCD tokamak reactor requires spatially averaged betas of 15 to 20% with a magnetic field at the TF coils of 12–13 T.On leave from Dept. of Electronic Engineering, University of Tokyo, Tokyo, Japan.     

High power pulsed lasers

Pulsed high power lasers can deliver sufficient energy on inertial fusion time scales (0.1–10 ns) to heat and compress DT fuel to fusion reaction conditions. Several laser systems have been examined for application to the fusion problem. Examples are Ndglass, CO₂, KrF, and I₂, etc. A great deal of developmental effort has been applied to the Ndglass laser and the CO₂ gas laser systems. These systems now deliver >10⁴ kJ and >20×10¹² W to inertial fusion targets. The Nova Ndglass laser is being constructed to provide >200 kJ and >200×10¹² W of 1 m radiation for fusion experimentation in the mid-1980s. For inertial fusion target gain, >100 times the laser input, it is expected that the laser must deliver 3–5 MJ of energy on the 10–20 ns time scale. This paper reviews the developments in laser technology and outlines approaches to construction of a 3–5 MJ driver.     

A TDOA location algorithm based on data fusion

A new positioning method in mobile networks is presented. Based on the data fusion technology, it processes multi-layer information fusion for the location estimates achieved by the Chan algorithm, which increases mobile positioning accuracy effectively by only using measured difference of arriving (TDOA) signals. The method is simple and practical, especially when the location estimates are corrupted by the non-line-of-sight (NLOS) error. It not only has high positioning accuracy, but also reduces the location failure probability. Results from computer simulation show that the proposed method is effective in various environments. __________ Translated from Journal of Dalian University of Technology, 2005, 45(1): 138–141 (in Chinese)     

Fusion Innovative Confinement Concepts: 2004

This paper summarizes recent progress in fusion Innovative Confinement Concepts (ICC) as reported at the 2004 ICC Workshop held May 25–28, 2004 in Madison, Wisconsin. This was the third in an annual series of workshops on this topic. The purpose of these workshops is to provide a forum for those who are thinking and working beyond what is considered to be the current state of understanding of fusion concepts.     

Neutronic Comparison of Tritium－Breeding Performance of Candidate Tritium－Breeding Materials

Tritium self-sustainment, which will meet the fuel requirement of fusion reactor, is one of the key issues of fusion power development. The tritium breeding performances of various tritium-breeding materials are compared based on a series of neutronics calculations using three-dimensional Monte Carlo neutron-photon transport code MCNP/4C with the IAEA FENDL-2 data library. The effects of the dimensions of the tritium-breeding zone and the enrichment of 6Li on Tritium Breeding Ratio (TBR) are analyzed. The effects of Be as a neutron multiplier on TBR are also calculated.     

Monitoring of multivariable dynamic processes and sensor auditing

Industrial continuous processes are usually operated under closed-loop control, yielding process measurements that are autocorrelated, cross correlated, and collinear. A statistical process monitoring (SPM) method based on state variables is introduced to monitor such processes. The statistical model that describes the in-control variability is based on a canonical variate (CV) state space model. The CV state variables are linear combinations of the past process measurements which explain the variability of the future measurements the most, and they are regarded as the principal dynamic dimensions. A T² statistic based on the CV state variables is utilized for developing the SPM procedure. The CV state variables are also used for monitoring sensor reliability. An experimental application to a high temperature short time (HTST) pasteurization process illustrates the proposed methodology.     

Application of evidence theory in information fusion of multiple sources in bayesian analysis

How to obtain proper prior distribution is one of the most critical problems in Bayesian analysis. In many practical cases, the prior information often comes from different sources, and the prior distribution form could be easily known in some certain way while the parameters are hard to determine. In this paper, based on the evidence theory, a new, method is presented to fuse the information of multiple sources and determine the parameters of the prior distribution when tile form is known. By taking the prior distributions which result from the infornlation of multiple sources and converting them into corresponding mass functions which can be combined by Dempster-Shafer (D-S) method, we get the combined mass function and the representative points of the prior distribution. These points are used to fit with the given distribution form to determine the parameters of the prior distribution. And then the fused prior distribution is obtained and Bayesian analysis can be performed. How to convert the prior distributions into mass functions properly and get the representative points of the fused prior distribution is the central question we address m this paper. The simulation example shows that the proposed method is effective.     

基于小波变换的遥感数据融合

采用Haar小波方法,对遥感图像进行尝试性的数据融合,实验证明Haar方法和传统的方法相比,具有精度高、效果好的优势。     

基于多幅图像的有效点扩散函数的高精度测量

将图像融合以及高精度测量方法应用于天文图像处理,对图片进行处理得到有效点扩散函数,并将有效点扩散函数拟合星像,得到星体的位置与光度信息．结果表明, 方向平均定位精度为0．036 pixel,Y方向平均定位精度为0．O44 pixel,平均测光精度达到0．032 magnitude,测量结果验证了该算法的有效性．     

基于抽样方法的燃耗计算核素积存量不确定度分析

基于抽样基本原理研究了应用于燃耗计算的不确定度分析方法,并开发了燃耗计算不确定度分析程序。基于评价核数据库ENDF/B-Ⅷ.0的裂变产额标准差和衰变常量标准差计算得到了衰变常量协方差矩阵和带相关性的裂变产额协方差矩阵,并结合SCALE6.2程序包的56群反应截面协方差数据库,对Takahama-3压水堆组件基准题中SF95-4样品进行不确定度分析。计算了反应截面、衰变常量和裂变产额不确定度引起的核素积存量的不确定度。计算结果表明,反应截面的不确定度是锕系核素积存量不确定度的主要来源,裂变产额和衰变常量的不确定度对部分裂变产物的积存量会引入较大的不确定度。但考虑裂变产额相关性后,裂变产额引起的不确定度显著降低。