安全关键系统的栈空间分析研究

由于存储空间异常引起的系统故障,系统开发或维护人员很难从失效特征直接判断到根原因。另外,存储空间异常通常会引起整个系统崩溃,对于安全关键系统,如航空电子系统,系统的失效往往会引起坠机或人员伤亡,因此,对安全关键系统的空间分析显得尤为重要。由于系统栈空间的分析涉及系统动态运行状态,在程序的任意点都有可能被中断服务程序或实时操作系统的其它任务中断。此外系统的栈分析需要基于目标码等特性,再次增加了对于系统栈空间分析的难度。本文从栈空间分析的必要性出发,提出一种综合中断抢占图的栈分析理论和方法,并就安全关键系统如何保证栈空间使用的确定性进行论述。最后,就安全关键软件系统FCOS的栈空间分析过程进行详细的阐述。     

磺酸型Gemini表面活性剂的合成及表面活性

以壬基酚、1,4-二溴丁烷和氯磺酸为主要原料,通过三步反应合成了新型的磺酸型Gemini表面活性剂9BA-4-9BA,讨论了合成反应时间、温度以及催化剂对产物纯度和产率等因素的影响,优化了反应过程。利用核磁共振谱和红外光谱表征了产物结构,并通过DCTA21表面/界面张力仪测试其水溶液中的表面张力。和传统表面活性剂相比,合成的Gemini表面活性剂9BA-4-9BA具有更高的表面活性,其临界胶束浓度和C20分别为6.2×10-4mol/L和1.1×10-5mol/L。     

阳离子型双子表面活性剂的合成及表面活性

合成了一种季铵盐型双子表面活性剂Gem in i 12-3-12,采用红外光谱、元素分析和两相滴定法对其结构和纯度进行了分析,测定了不同浓度表面活性剂水溶液的表面张力,并得到临界胶束浓度(CMC)、饱和吸附量(Γm ax)、单分子饱和吸附面积(Am in)。结果表明,Gem in i 12-3-12的收率为77.2%,纯度为98.4%,它与相应的单尾基十二烷基三甲基溴化铵(DTAB)的表面活性相当,但CMC比DTAB低14倍左右。     

Molar volume and ultrasonic studies of europium soaps in mixed organic solvents

The ultrasonic velocity and density measurements of europium soaps in a mixture of benzene and methanol (3:2, vol/vol) were used to evaluate various acoustic parameters and molar volume and to determine the critical micelle concentration. The results showed that the ultrasonic velocity, specific acoustic impedance, molar sound velocity, and molar compressibility increase, and intermolecular free length, adiabatic Compressibility, and relative association decrease with increasing concentration and chainlength of the soap. The results were interpreted in terms of soap-solvent interaction.     

降雨量空间分布对山洪临界雨量的影响

山洪临界雨量是山洪灾害预报预警的重要基础,受降雨、土壤含水量以及下垫面的影响,其中降雨量空间分布是重要的影响因素之一。以湖北省崇阳县高堤河流域为例,采用HEC-HMS分布式水文模型计算设计洪水,试算法计算临界雨量,提出了降雨量空间分布系数,分析了降雨量空间分布系数与临界雨量的关系,探讨了降雨空间分布对临界雨量的影响。结果表明:当降雨从上游到下游逐渐减少时,达到相同成灾流量对应的临界雨量最大,暴雨中心在下游时临界雨量最小,说明降雨量空间分布对临界雨量影响显著。由分析可知,在山洪灾害预警实践中应根据实际的降雨空间分布对预警指标适当修正,对山洪进行动态雨量预警。     

乐果合成釜故障分析及处理

通过增加底轴承来改变搅拌轴的临界转速,解决了乐果合成釜试车过程中震动较大的问题,达到了生产和工艺要求。     

Preparation of dibasic acid-containing soy phospholipids by chemical and enzyme-catalyzed transesterification and evaluation of their surface-active properties

The preparation of dibasic acid-containing soy phospholipid was made by transesterification reaction with alkyl ester of diabasic acid with both lipase and alkoxide as a catalyst. The extent of incorporation of a dibasic acid varied with the molecular size of the dibasic acid. The extent of incorporation in soy phospholipids was 4–13% in the case of adipic acid and 9–20% in the case of sebacic acid. The surface-active properties of these modified soy phospholipids were examined and were found to be different from those of the original (unmodified) soy phospholipid. The interfacial properties such as critical micelle concentration (CMC), γ_CMC, surface excess concentration Γ_max, and minimum area per molecule (Å), and thermodynamic parameters such as standard free energy of micellization, were found to depend on the hydrophobic part of the dibasic acids.     

无患子表面活性物及其复配体系的性质研究

对天然植物原料无患子提取物中的表面活性物的性质（临界胶束浓度、表面张力和起泡性能）及其影响因素（温度、pH、水硬度和盐度等）进行了系统的研究，结果表明无患子表面活性物具有很低的cmc和γcmc，且在一定范围内受一些因素的影响也不大，是一种理想的香波原料；同时也研究了无患子活性物与其他温和型的阴离子表面活性剂的复配体系，表明具有明显的协同增效效果。     

Temperature-dependent transparency of poly(HPMA-co-DMA) hydrogels: effect of synthesis parameters

The acrylic comonomers hydroxypropyl methacrylate (HPMA) and N,N-dimethylaminoethyl methacrylate (DMA) have been used in several earlier studies to produce pH-responsive hydrogels. However, these same monomers can also be used to prepare hydrogels that are highly responsive to temperature. One manifestation of this temperature sensitivity is a sharp decrease in hydrogel optical transparency that occurs when the temperature exceeds a critical transition value. For example, a hydrogel that exhibits a swelling transition at the physiological pH value of 7.4 has a transition temperature of about 45 °C when the environmental salt concentration is 0.15 M. The value of the transparency transition temperature is shown to depend on hydrogel synthesis parameters such as comonomer mole ratio, crosslinker mole ratio, and even initiator concentration. By reducing the mole ratio of the crosslinker tetraethylene glycol dimethacrylate (TEGDMA), the transition temperature can be lowered by as much as 15 °C. Environmental salt concentration and solvent polarity are also shown to influence the transition temperature.     

Corrosion inhibition of triethanolammonium bromide mono- and dibenzoate as cationic inhibitors in an acidic medium

A weight loss technique was used to determine the corrosion inhibition efficiency of synthesized alkyl mono-and dibenzoate triethanolammonium bromide derivatives (TEAMB, TEADB) in an acidic medium (2 N HCl) at different doses (50, 100, and 200 ppm). The results showed that monoderivatives had a higher corrosion inhibition efficiency than diderivatives. The results were correlated with several factors, including the alkyl chain length of the hydrophobic chains, interfacial tension (IT), critical micelle concentration (CMC), and adsorption free energy of these inhibitors. Increasing the geometric length of the alkyl chains in the synthesized inhibitors had an increasing effect on their corrosion inhibition efficiency, whereas decreasing the CMC and IT had an increasing effect on their tendency toward corrosion inhibition. The number of hydrophobic chains attached to the inhibitor molecules had a vital influence on their efficiency as corrosion inhibitors.