轧机主传动安全销弹塑性有限元分析

本文针对轧机主传动系统的安全销在破坏前已产生了塑性变形,采用三维弹塑性有限元对安全销进行应力分析,模拟出材料的应力-应变非线性曲线,并运用牛顿-拉普森平衡迭代法根据模拟出的应力-应变非线性曲线对安全销进行应力计算,通过多次试算得出其能承受的最大载荷,并提出了改进意见.     

Kinetics of synthesis of Li4Ti5O12 through solid-solid reaction

1. Introduction The solid-solid reaction used in synthesizing various kinds of electrochemical materials has many advantages, such as simple process, without using solvent, saving energy, friendly to the environment and easy to obtain good quality materials like nano-size materials. Recently, the manufacturing of electrochemistry materials has been paid more atten- tion due to its increasing needs. Therefore it is a natural interest to study the synthesis of electro- chemical materials by usin…     

Grain-size effects in the quasi-static fracture resistance of a thermally embrittled RPV steel (quenched and tempered microstructures)

The elastic-plastic fracture toughness and crack extension behavior under the quasi-static loading regimen of several thermally embrittled conditions of a nuclear reactor pressure vessel (RPV) steel were assessed on the basis of microstructural parameters. It was discovered that the bainite packet size is the fracture properties controlling parameter of single-phase quenched and tempered microstructures. Results were found in close agreement to those obtained in a parallel study with dual-phase annealed microstructures derived from the same low alloy steel. Similarly, it was concluded that a Hall-Petch type relationship correlates J-fracture mechanics criteria to the grain size.     

离心铸造梯度功能材料凝固过程中第二相的迁移行为

金属液在离心铸造下将发生第二相质点的径向移动。本文分析了第二相质点的移动规律。     

高碳钢钢丝在铅浴和CMC水溶液中的冷却行为

利用钢丝探头分别测量了含碳0.70%的钢丝在铅浴和CMC水溶液中的冷却过程。用冷却曲线分析法阐释了钢丝的冷却过程和相变规律。钢丝的“体积效应”和在其冷却介质中的热扩散能力共同决定了铅浴淬火过程及钢丝的相变过程。高碳钢钢丝在0.25%CMC水溶液中可完全转变为珠光体组织,但其转变温度由于其连续冷却转变特性而高于在铅浴中的转变温度。根据铅浴淬火的冷却本质和CMC水溶液的冷却特性,用于替代铅浴的淬火介质应设法加快初始阶段冷却速率。     

Influence of the stress,strain, and temperature on the surface roughness of an AlSl 52100 steel due to an orthogonal cut

In recent years, the finite element method (FEM) has become the main tool for simulating the metal cutting process because research based on trial and error is time consuming and requires high investment. Early studies were done by different investigators. In this research AISI 52100, hardened steel (62 HRC) was selected for an orthogonal machining process as well as metal cutting simulation using the software DEFORM-2D. This software is based on a forging process and has been adapted to an orthogonal machining process. The results of simulated cutting forces were compared with experimental cutting force data to validate the orthogonal cut simulation. Also, the surface roughness was measured, and the influence of the stress, strain, and temperature on the surface roughness was studied.     

离心泵性能参数的自动测定和自动控制

通过将计算机技术应用于离心泵性能参数的研究，实现了离心泵性能参数的自动测定和自动控制。     

应力交变下微型土压力计的标定及应用

为了研究土压力计在不同应力状态下的敏感系数,利用镶嵌有微型土压力计的模型桩,按照两种方式设计应力交变加载模式进行标定:(a)从初始零应力状态分级加载—卸载至零;(b)从初始零应力状态加载到应力最大值,分级卸载—加载,逐渐到零应力状态。研究结果表明:初始应力为零的加载曲线线性较好,敏感系数可用线性函数进行拟合;初始应力不为零的加载曲线线性也较好,敏感系数也可用线性函数进行拟合;而卸载曲线包含显著的非线性和滞后效应,此时敏感系数就不是一个固定值,可采用指数曲线来进行拟合。将获取的标定系数应用于水平受荷模型桩的桩身应力分析中,在加载过程中3.5D~5.5D深处桩身应力一直变大,且变化幅度最大。研究成果可为水利工程中板桩、抗滑桩等水平受荷桩桩身截面尺寸及配筋设计提供参考。     

Packed-microtubes model for flowthrough chromatography of protein

A mathematical model for flowthrough (perfusion) chromatography, namely packed-microtubes (PMT) model, has been proposed for a column packed with biporous (BiP) anion exchanger in which the mesopores and flowthrough pores are created with liquid and solid porogens, respectively. The model is established based on the assumption that the BiP particle is made up of packed microtubes. Bovine serum albumin (BSA) is used as a model protein and three kinds of anion exchangers (i.e., mesoporous, macroporous and BiP resins) are used as adsorbents to determine the model parameters and to evaluate the model. Adsorption equilibrium and finite bath experiments are performed to determine the adsorption isotherms and kinetics parameters. Both the bound amounts of the protein on the surface of the mesopores and macropores are experimentally determined and taken into account in the mathematical model. With all the model parameters determined by independent experiments or calculated from available correlations, model simulations are performed and compared with the experimentally determined breakthrough profiles of the BiP column. It is found that the model predictions agree reasonably well with the experimental data obtained under various conditions and the PMT model fit experimental data better than the modified double linear driving force (LLDF) model proposed by Leitão and Rodriogues (1999. Biochemical Engineering Journal 3, 131) in which the adsorbent particle is considered to be made up of packed microparticles. The results indicate that the PMT model is more reasonable for this kind of BiP adsorbent.