�ݼ����߷����������Ϸ�

通过对J.J.Arps方程的推导,提出了油气藏产量递减曲线分析的最佳拟合法。用该法可直接求出递减指数N、初始递减率D1及油气递减前的稳定产量Qi,避免了使用试差法的大量运算过程,大大提高了油气藏工程中指标预测的精度。     

Multi‐layered flat‐surface micro‐optical components directly molded on an LCD panel

Abstract— We have developed a process to fabricate optical components, such as a lens, prism, or diffuser, directly on to a glass substrate. Processes include precision mastering by diamond cutting and multi‐layer photopolymer (2P) molding to realize flat surfaces and the integration of multiple components with an alignment within a few micrometers.     

曲率圆弧段代替切线段的数值计算方法

为了确保安全,核工业和其它一些工业要求某些参数的计算值只能取正的相对误差且不大于5×10-3,这是它们对数值计算的基本要求.例如,反应堆带功率运行时,功率增长总是随时间上升,功率曲线是向下凹的.传统的龙格-库塔法计算值总是小于真实值,并且随着时间的增加,计算值越来越小于真实值.按计算值分析,反应堆是安全的,但实际上反应堆是不安全的.这对反应堆的安全极为不利.为此,本文开拓了一个全新的数值计算方法.与龙格-库塔法相比,该方法计算工作量小,与预测一校正法相比,该方法没有启动问题.更值得指出的是计算值高于真实值,这样,反应堆计算结果总是偏于安全的.     

Validity of dynamic electrochemical impedance spectra of some amine corrosion inhibitors in petroleum/water corrosive mixtures by Kramers-Kronig transformation

In our previous works, the corrosion inhibition properties of propylamine (PA), iso-propylamine (i-PA), butylamine (BA), tert-butylamine (t-BA), hexylamine (HA), ethylenediamine (EDA), diethanolamine (DEA), 3-amino-1-propanol (3-AP), 2-dimethylethanolamine (2-DEA), cyclohexylamine (CHA), N-methylcyclohexylamine (N-MCA) and dicyclohexylamine (DCHA) have been investigated by means of electrochemical impedance spectroscopy (EIS) with a carbon steel rotating disc electrode in some petroleum/water corrosive mixtures containing acetic acid and NaCl at 25 °C. In this work, the Kramers-Kronig transformations (KKTs) were applied to evaluate the validity of the impedance data of these amine compounds in hydrodynamic condition. The results obtained showed that experimental impedance data did not satisfy in K-K relations completely viz. indicated some errors. These errors were related to stray capacitances, external transmission line effects, pits formation and change in interface during data acquisition at high and low frequencies regions. In addition, the selection of a suitable equivalent circuit strongly emphasized to better interpret of EIS data which in turn cause better resulted KKTs spectra. With considering obtained transformations, more effective inhibitor was selected with regard to its charge transfer resistance, the corrosion capacitance and well satisfying in K-K relations.     

全密封变压器用波纹油箱的波纹高计算

介绍了全密封变压器所用的液纹油相的波纹筋高的计算方法，并用试验进行了验证。     

利用5A284型铣齿机加工转盘螺旋锥齿轮探讨

利用引进设备5A284苏联铣齿机加工石油钻机转盘螺旋锥齿轮，建立计算程序并进行调整计算，详述了遇到的问题及解决方法，使所加工的锥齿轮质量良好。     

车载制氧机加装预冷装置的研究与实现

航空兵部队地面保障装备之一的车载移动式制氧机，采用封闭循环水冷却，由于受到使用条件的限制，多数情况下冷却效果不尽理想，加装蒸汽压缩预冷装置，即可较好地了和低冷却系统温度，提高制冷量和整机使用寿命，又可满足整车机动性，动力等技术要求。     

新型PDC钻头的防斜打快效果及评价

大庆油田海拉尔地区的地层倾角大、岩屑录井荧光级别低,亟待解决满足岩屑录井要求的防斜打直问题。为了能够在获得足够大的岩屑颗粒和提高机械钻速的基础上达到防斜打直的目的,制定了采用大切削齿B425型PDC钻头配以小钟摆钻具组合的现场试验方案。试验表明:B425钻头与牙轮钻头所破碎的岩屑颗粒基本相当,能够满足地质岩屑录井的要求;与牙轮钻头相比,B425钻头显著地提高了机械钻速,降低了钻头费用,减少了起下钻次数;单只B425的进尺可达1000m以上,相当于2~3只牙轮钻头的进尺;采用PDC钻头配以小钟摆钻具组合,可以较好地解决防斜打直问题。此外,针对试验中遇到的问题,通过改进井身结构和调整钻井参数,形成了一套适合于海拉尔地区的防斜打快技术。     

Progress in multilayer devices as X-ray optical elements

A new kind of mirror based on multilayering techniques gives the possibility of preparing artificial Bragg reflectors over all the X-UV range. The possibility to choose most of the parameters governing the reflectivity opens the possibility to get a very good efficiency, even under normal incidence. Main parameters, evaporating techniques and tests are described. Some example of recent results are compared to the theoretical predictions.     

国有股减持、政府隐性担保与投资者行为

国有股减持导致股票市场的大幅下跌，其咎不在以市场价减持国有股的减持方案．政府对股票市场的隐性担保造成投资者对市场走势的某种“理性的”稳定预期和信念．在此基础之上，政府和投资者塑造各自的心理和行为模式、国有股减持的信号含义就是政府要解除对市场的隐性担保．这个信号引发投资者固有的预期模式和行为模式的转变以及股票市场的信心危机。进而导致股票市场的“非理性反应”—市场以大幅下跌拒绝政府国有股减持和解除担保关系的行为、政府被迫停止国有股减持行为，但停止国有股减持并没有阻止股市的持续下跌，因为减持虽然停止，自减持发出的解除隐性担保的信号仍然有效。