基于DSP的嵌入式以太局域通信网设计

介绍了一种把多个孤立的嵌入式系统设计成以太通信网络的方法,以及如何在嵌入式通信网络中进行数据、语音、图像通信和如何连接到Internet。     

ARAM·ARIES SPM-Lite便携式遥测地震数据采集系统简介

ARAM·ARIES SPM-Lite便携式遥测地震数据采集系统是加拿大GEO-X公司在2002年下半年推出的全新小型便携式地震数据采集系统。该仪器运用了当今最先进的计算机制造技术、网络化技术和微电子技术,除继承了ARAM-ARIES地震数据采集系统所有功能和技术外,它还简化了硬件结构,使体积更小,重量更轻,功能性更强。更加适应地矿、煤田、丛林和山区进行地震勘探。     

适用于快速平台测井的多通道核能谱测井仪设计

介绍一种基于快速平台测井要求的多通道核能谱测井仪设计方案。复杂可编程逻辑器件的应用使仪器功能增强，规模减小。该系统可对岩性密度长短源距脉冲信号、自然γ能谱脉冲信号进行多道脉冲幅度分析，并对补偿中子测井信号及井下多路常规模拟信号、脉冲信号进行数字化采集。数据传输采用曼彻斯特编码，传输方式可选择20kB／s半双工(兼容Atlas 3508)或下行20kB／s、上行41．66或93．75kB／s全双工方式(兼容Atlas WTS)，适应挂接到不同测井系统的需要。     

Object-oriented DBMS requirements

The requirements on an object-oriented DBMS for management of information in a large, complex enterprise are presented. These requirements aid in the achievement of an environment characterized by data sharing, open architectures, application and data portability, and assurance of data integrity. They were defined from the point of view of a user of the DBMS; therefore they describe the expected functionality of the DBMS and do not specify the method of implementation to achieve this functionality. They encompass requirements on the data model, query and data manipulation languages, the system architecure, interfaces to the system, change management, and transaction management.     

Quality of Crude Fish Oil Extracted from Herring Byproducts of Varying States of Freshness

ABSTRACT: Herring byproducts were stored at 2 and 15 °C for up to 72 h. Over time, significant increases of total volatile bases (TVB), histamine, putrescine, cadaverine, and tyramine were detected. However, only tyramine and TVB levels were temperature-dependent. The level of total polyunsaturated fatty acids (PUFAs) was constant. Longer byproducts storage gave rise to an oil with higher levels of free fatty acids, eicosapentaenoic acid (EPA), docosahexaenoic acid (DHA), and total PUFAs, while fluorescent compounds were lower. A higher storage temperature led to oil higher in α-tocopherol and EPA levels and lower in anisidine value. Surprisingly, the oil with the highest content of PUFAs was not produced from the freshest byproducts, and oil with low oxidation products can be extracted from stored byproducts.     

基于FIF0与电平转换器的DSP高速ADC系统

给出了一种以DSP数字信号处理芯片TMS320VC5402作数据处理器，结合高速模数转换器AD9244、先进先出缓冲存储器芯片IDT7204以及电平转换器SN74ALVC164245构成的高速数据采集系统的设计方案。     

用于实时数据传输的滑动帧方法及其实现

根据某雷达系统对测量信号的快速传输要求,提出采用滑动帧的处理方法并在FPGA中实现,克服了传统帧处理难以满足快速传输要求的不足。阐述了滑动帧结构的构造思想,详述了滑动帧结构的特点及具体功能模块的实现。根据实际应用需求构造了滑动帧结构处理器,试验和应用结果表明设计可行有效,能充分满足实时数据传输的要求。     

Elimination of organic matter present in wastewaters from the cork industry by membrane filtration

BACKGROUND: The first stage of the cork industrial process generates great volumes of wastewater with moderate to high organic pollutant content that must be purified using different procedures, such as filtration by membranes. RESULTS: The tangential filtration of these wastewaters was studied using two different laboratory equipments. In the first one, three ultrafiltration (UF) membranes were tested, with molecular weight cut‐off (MWCO) 100 kDa and 30 kDa, and two operating modes were used: total recycling of permeate and retentate streams, and in continuous mode, without recycling both streams. In the total recycling UF experiments, the influence of the operating variables on the permeate flux was first established. The effectiveness of the different membranes was determined by evaluating the rejection coefficients for several parameters that measure the global pollutant content of the effluent. The values found for these rejection coefficients were in the following order: ellagic acid and color > absorbance at 254 nm > tannic content > COD (chemical oxygen demand). In the continuous mode experiments, the fouling mechanism for each membrane was established by fitting the experimental data to various filtration fouling models given in the literature. The operating mode in the second equipment was batch concentration, and additional experiments were carried out with an UF membrane (2 kDa), and with a NF membrane (with MWCO in the range 150–300 Da). CONCLUSIONS: The three operating modes tested provided different rejection levels of organic matter; among them, the most effective procedure tested was batch concentration mode using a NF membrane. Copyright © 2007 Society of Chemical Industry     

箍筋末端135度弯钩二次就位法讨论

随着人们对建筑安全的日益重视 ,对建筑抗震要求的提高 ,国内外有关规范都对箍筋末端的设置作了明确规定 ,要求做成 135度弯钩。而在工程实践中 ,由于施工上的技术困难 ,很多工程都只设置成 90度弯钩。笔者提出的箍筋末端 135度弯钩二次就位法在基本不增加 90度弯钩施工难度与费用的基础上实现了 135度弯钩的施工 ,其法是可行的     

The influence of raw material characteristics on the industrial pelletizing process and pellet quality

Industrial pelletizing of sawdust was carried out as a designed experiment in the factors: sawdust moisture content, fractions of fresh pine, stored pine and spruce. The process parameters and response variables were energy consumption, pellet flow rate, pellet bulk density, durability and moisture content. The final data consisted of twelve industrial scale runs. Because of the many response variables, data evaluation was by principal component analysis of a 12 × 9 data matrix. The two principal component model showed a clustering of samples, with a good reproducibility of the center points. It also showed a positive correlation of energy consumption, bulk density and durability all negatively correlated to flow rate and moisture content. The stored pine was more related to high durability and bulk density. The role of the spruce fraction was unclear. The design matrix, augmented with the process parameters was a 12 × 6 matrix. Partial least squares regression showed excellent results for pellet moisture content and bulk density. The model for durability was promising. A 12 × 21 data matrix of fatty- and resin acid concentrations measured by GC–MS showed the differences between fresh and stored pine very clearly. The influence of the spruce fraction was less clear. However, the influence of the fatty- and resin acids on the pelletizing process could not be confirmed, indicating that other differences between fresh and stored pine sawdust have to be investigated. This work shows that it is possible to design the pelletizing process for moderate energy consumption and high pellet quality.