Bimanual interference associated with the selection of target locations.

Four experiments were conducted to identify the locus of interference observed during the preparation of bimanual reaching movements. Target locations were specified by color, and the right-hand and left-hand targets could be either the same or a different color. Movements of different amplitudes (Experiment 1) or different directions (Experiment 2) to targets of the same color were initiated more quickly than symmetric movements to targets of different colors. These results indicate that costs observed during bimanual movements arise during target selection rather than during motor programming. Experiments 3 and 4 further examined the interference associated with target selection. Reaction time costs were found with unimanual movements when the target was presented among distractors associated with responses for the other hand. Interference observed during bimanual reaching appears to reflect difficulty in segregating the response rules assigned to each hand. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

风冷冷水机组室内安装方案的探讨

结合实际工程，介绍风冷冷水机组在工程应用中置于建筑转换层或建筑内的设计，并对风冷冷水机组室内安装的设计进行探讨。     

Pure perceptual-based sequence learning.

Learning a sequence of target locations when the sequence is uncorrelated with a sequence of responses and target location is not the response dimension (pure perceptual-based sequence learning) was examined. Using probabilistic sequences of target locations, the author shows that such learning can be implicit, is unaffected by distance between target locations, and is mostly limited to first-order transition probabilities. Moreover, the mechanism underlying learning affords processing of information at anticipated target locations and appears to be attention based. Implications for hypotheses of implicit sequence learning are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Optimal Locations of Groundwater Extractions in Coastal Aquifers

A regional water supply management model for coastal aquifers was developed. One of its outcomes is the definition of the optimized locations for groundwater withdrawal. Such a tool permits the analysis of alternative plans for groundwater extraction and the sustainable use of water resources in a coastal aquifer subject to saltwater intrusion. The principal components are the evolutionary optimization and the analytical/numerical simulation models. The optimization technique looks for the best well locations taking into consideration the economic results and the satisfaction of the societal water demand. However these two concerns are conditioned by trying to control the saltwater intrusion, i.e., preserving the environmental equilibrium. The simulation model uses the governing mathematical equations for groundwater movement to find the interface between freshwater and saltwater. Because of the non-linearity in the system and the possibility of a jumping interface, a security distance was defined. This is a controlling variable which can be set by the decision makers. The model was applied to a typical case with interesting results. For example, diagrams showing the relationship between the location of the wells and the security distance(s) are of importance to the managers. It was also crucial to have an understanding of the tradeoffs between groundwater withdrawals, positions of the wells from the coast line, and the security distance. The model was also applied to a real case in order to relate the extractions, distances and artificial recharge (not presented in this paper).     

大庆油田杏1-3区三次加密试验区剩余油分布研究

通过对试验区近年完钻的检查井各单砂层水淹状况及其影响因素的分析。利用神经网络模式识别方法建立起单层剩余油识别模型，在此基础上对三次加密试验区各小层剩余油分布进行研究，总结出各类油层剩余油分布特征及成因类型，并分析了试验区剩余油潜力分布，从而为三次加密布井及射孔方案编制提供了可靠的依据。     

长庆上古生界气层CO2增能压裂工艺

长庆上古气藏物性差,压力系数低,水锁伤害大,采用常规水力压裂,入井液返排困难,气井产量低。在储层改造地质研究的基础上,通过对CO2泡沫压裂技术进行室内攻关,引进开发了CO2泡沫压裂酸性交联技术,优化了CO2泡沫方案设计及现场施工工艺,配套了CO2增能压裂工艺技术。经过现场应用,充分说明了CO2增能压裂是一项行之有效的工艺技术,对于提高单井产量和长庆气田整体开发水平都是有益的。     

单站被动定位及光电实现

目的　光电技术实现的单站被动定位具有重要的军事价值 ,本文介绍了其原理、方法和发展 .方法　本文中 ,单站被动定位分为激光和红外两部分内容讨论 .结果　明确了采用激光和红外技术的单站被动定位工作原理和存在的技术难点 ,同时 ,指出了被动定位的研究动向 .结论　文章表明单站被动定位及光电实现值得进一步研究 .     

稳定锐态型钛白粉分散性能工业试验

试验分别用水性分散剂和油性分散剂对钛白粉半成品进行粉碎包膜，检测成品的应用性能，发现水性分散剂效果不明显，而油性分散剂对分散性和分散稳定化程度都有提高，同时分析了在锐态型钛白粉行业产品包膜效果的影响因素，以供参考。     

基于参差距离的相位差变化值的解模糊方法研究

利用相位差及其变化率对辐射源进行定位是新近提出的一种快速单基无源定位方法。本文分析了利用相位干涉议得到的相位差变化值的相位模糊特点,提出了一种利用相位干涉仪的接收天线之间的参差距离对相位差变化值进行解模糊的方法,讨论了正确解模糊的条件和范围,并给出了仿真结果。     

Experience with Siberian Centralized Dispatch Regulation regarding location determination of damages sustained by intersystem high-voltage transmission lines

A set of measures that can be implemented by the Relay-Protection and Automated-Equipment Service for Centralized Dispatch Regulation (CDR) in Siberia to determine the location of damage sustained by inter-system 550-and 220-kV transmission lines maintained by the United Power System (UPS) of Siberia, and the methodology and technology of damage-location determination (DLD) are described. The damage sustained by the 500-kV high-voltage lines (HL), and the accuracy of DLD relative to zero-sequence emergency parameters are analyzed statically. __________ Translated from élektricheskie Stantsii, No. 5, pp. 59–62, May, 2006.